Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25

Thread: Leathers repair - Auckland

  1. #16
    Join Date
    31st August 2007 - 17:40
    Bike
    1996 Suzuki RF900R, 1989 VFR400 track
    Location
    North Shore, Auckland
    Posts
    45
    Quote Originally Posted by sharky View Post
    Trying too hard. Locked up the front going into hairpin. At least it was the last race of the weekend.
    That aside - awesome weekend. Lowered PB by over a second to 1m08.5 consistantly and scored 3 wins in Pre '89 J.
    Pretty happy - dunno if Phil will be, now he has more glassing to do He has a few scratches too, but that's his story.
    Managed to straight line turns 2 & 3, didn't brake hard enough after turn 1 so ended up losing the front wheel in the kitty litter and had a cup of tea with the marshalls. Broke brake lever and bent handlebar which kinked on straightening so had to do a repair job Sat night. Worked out fine except I didn't check the farkin cast shit-heap alloy footrest closely enough and the damn think broke during qualifying Sun morning. Managed to wire it in place so Ben it looks like one of yours now!! Another couple of scratches in the leathers!

  2. #17
    Join Date
    30th July 2008 - 10:02
    Bike
    89 Honda VFR400
    Location
    Tauranga
    Posts
    368
    Quote Originally Posted by I14 View Post
    Managed to straight line turns 2 & 3, didn't brake hard enough after turn 1 so ended up losing the front wheel in the kitty litter and had a cup of tea with the marshalls.
    Good tea? You'd better watch yourself Phil, your gunna start getting a reputation.

    Quote Originally Posted by I14 View Post
    Managed to wire it in place so Ben it looks like one of yours now!!
    You rude bastard!

    How dare you insinuate Id use inferior wire for repairs. Everybody knows zip ties are where its at.

  3. #18
    Join Date
    28th April 2004 - 11:42
    Bike
    tedium
    Location
    earth
    Posts
    3,526
    Quote Originally Posted by I14 View Post
    Another couple of scratches in the leathers!
    You can't be taken seriously on a CBR400 without scratched leathers.
    Quote Originally Posted by Kickha
    Fuck off, cheese has no place in pies
    Quote Originally Posted by Akzle
    i would could and can, put a fat fuck down with a bit of brass.

  4. #19
    Join Date
    31st August 2007 - 17:40
    Bike
    1996 Suzuki RF900R, 1989 VFR400 track
    Location
    North Shore, Auckland
    Posts
    45
    Quote Originally Posted by Benk View Post
    Good tea? You'd better watch yourself Phil, your gunna start getting a reputation.
    Well I haven't had to buy new leathers yet to cover up the scratches in the old ones!!

    Quote Originally Posted by Benk View Post
    You rude bastard!

    How dare you insinuate Id use inferior wire for repairs. Everybody knows zip ties are where its at.
    I tried zip ties but they broke! Scott's dad found some old wire he robbed off the roof somewhere and that did the trick. Gonna make some glass ones now like on the CBR, they don't break!!

  5. #20
    Join Date
    31st August 2007 - 17:40
    Bike
    1996 Suzuki RF900R, 1989 VFR400 track
    Location
    North Shore, Auckland
    Posts
    45
    Quote Originally Posted by scracha View Post
    You can't be taken seriously on a CBR400 without scratched leathers.
    VFR400 now Stevie, gone to the dark side. My CBR's gonna be raced by a mate from work. Yours in the scrap heap permanently?

  6. #21
    Join Date
    30th July 2008 - 10:02
    Bike
    89 Honda VFR400
    Location
    Tauranga
    Posts
    368
    Quote Originally Posted by I14 View Post
    Yours in the scrap heap permanently?
    Baaaaaaaaaaaaaaaaaaahahahahahahahah

    Quote Originally Posted by I14 View Post
    Well I haven't had to buy new leathers yet to cover up the scratches in the old ones!!


    Quote Originally Posted by I14 View Post
    I tried zip ties but they broke! Scott's dad found some old wire he robbed off the roof somewhere and that did the trick. Gonna make some glass ones now like on the CBR, they don't break!!
    Zip Ties? Failed? Uh oh....

  7. #22
    Join Date
    28th April 2004 - 11:42
    Bike
    tedium
    Location
    earth
    Posts
    3,526
    Quote Originally Posted by I14 View Post
    VFR400 now Stevie, gone to the dark side. My CBR's gonna be raced by a mate from work. Yours in the scrap heap permanently?
    Nope, it will be resurrected in 2010. Gotta give slow cunts like Benk time to catch up and make it interesting.
    Quote Originally Posted by Kickha
    Fuck off, cheese has no place in pies
    Quote Originally Posted by Akzle
    i would could and can, put a fat fuck down with a bit of brass.

  8. #23
    Join Date
    30th July 2008 - 10:02
    Bike
    89 Honda VFR400
    Location
    Tauranga
    Posts
    368
    Quote Originally Posted by scracha View Post
    Nope, it will be resurrected in 2010. Gotta give slow cunts like Benk time to catch up and make it interesting.
    Should be able to get my jetting sussed by the time your fugly little bitch is back on track.

  9. #24
    Join Date
    28th April 2004 - 11:42
    Bike
    tedium
    Location
    earth
    Posts
    3,526
    Quote Originally Posted by Benk View Post
    Should be able to get my jetting sussed by the time your fugly little bitch is back on track.
    The tail section is quite pretty. That's the only bit you'll see.

    Can I have your transponder number as I want to have my bike deploying flares and chaff before you ram me again.
    Quote Originally Posted by Kickha
    Fuck off, cheese has no place in pies
    Quote Originally Posted by Akzle
    i would could and can, put a fat fuck down with a bit of brass.

  10. #25
    Join Date
    30th July 2008 - 10:02
    Bike
    89 Honda VFR400
    Location
    Tauranga
    Posts
    368
    Quote Originally Posted by scracha View Post
    Can I have your transponder number as I want to have my bike deploying flares and chaff before you ram me again.
    Ahahaahaha

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •