Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Which ATX power supply should I buy?

  1. #1
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901

    Which ATX power supply should I buy?


  2. #2
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Funny you ask that. I am just at this moment replacing a Themaltake PSU which is only 1 day old......
    I think their quality must have gone down lately or something????
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  3. #3
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    Quote Originally Posted by avgas View Post
    Funny you ask that. I am just at this moment replacing a Themaltake PSU which is only 1 day old......
    I think their quality must have gone down lately or something????
    I always thought Thermaltake made reasonably good quality gear.

  4. #4
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    I always thought thermaltake was a good brand, work bought bout 20 of them and they are all going strong still. They have been thrashed quite a bit too as they are in custom applications. Maybe avgas just got a bad one? I'm also guessing being a more reputable brand they will be better for warranty servicing...
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

  5. #5
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    That Thermaltake one should have enough current on the 12V rail for a decent gaming rig wouldn't it? I'm thinking about building up an i7 system at some stage with a 'decent' video card, so I don't want to have to upgrade the PSU in a year from now.

  6. #6
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    I wouldn't buy either. Remember psu's cannot deliver their rating consistently. Even a peak, most would probably fail. Currently got an antec 850W, but probably going to have to upgrade at some point.

  7. #7
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    Quote Originally Posted by Gremlin View Post
    I wouldn't buy either. Remember psu's cannot deliver their rating consistently. Even a peak, most would probably fail. Currently got an antec 850W, but probably going to have to upgrade at some point.
    I've had a look at this calculator here http://extreme.outervision.com/psucalculatorlite.jsp and it seems fairly accurate.

  8. #8
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    yep, then add at least 20% headroom. Ie, if the calculator says 400W, buy at least 500W, and decent quality. Modern hungry gfx cards will consume 100-200W quite happily.

  9. #9
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Quote Originally Posted by bogan View Post
    Maybe avgas just got a bad one?
    3 actually.
    But yeah usually really good gear. So I am very confused.

    The i7 rig that I am currently setting up as a replacement SCADA server for a customer is only running 450 watts. Seems to be doing ok. But its only 8gb ram and 128mb graphics card.

    Fucking 32bit programs have fucked up my day - looks like I am going to have to downgrade the win7 on it.

    Fucking computers.
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  10. #10
    Join Date
    31st July 2008 - 12:29
    Bike
    Thumpapotamus
    Location
    Tauranga
    Posts
    383
    My Raidmax 450W does a good job, nice and quite with 120mm fan. runs my CAD machine

    Also have 3 x antec 380w running 2 x 3.0 GHz quad cores with 512 graphics and a triple core.

    Never had a PSU fail b4, a good 1 like a thermaltake will disconnect itself if put on a short or faulty device.

    Replacing something a day old sounds like fixing a symptom not the cause...

  11. #11
    Join Date
    4th May 2006 - 22:17
    Bike
    1987 GPX 250
    Location
    New Zealand
    Posts
    3,445
    I purchased a cheap PSU last year. Then i read a review online saying how crap it was which explained why my computer wouldnt work! Go Corsair they make seriously good stuff.

    Just because a PSU says its 700W doesn't mean it is.

  12. #12
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Quote Originally Posted by Juzz976 View Post
    My Raidmax 450W does a good job, nice and quite with 120mm fan. runs my CAD machine
    Also have 3 x antec 380w running 2 x 3.0 GHz quad cores with 512 graphics and a triple core.
    Never had a PSU fail b4, a good 1 like a thermaltake will disconnect itself if put on a short or faulty device.
    Replacing something a day old sounds like fixing a symptom not the cause...
    Yep.
    Funny thing is the cause was not found. Everything else on that circuit is fine - leaving only the PC's to fault (not my boxes and he didn't have time to sort). So alas I figure we ended up with a bad batch. Had to help the guy out as he was presenting a 100K SCADA package and just had 3 out of 4 servers pop.
    I have had many supplies die over the years. But this was the first time it had died in a situation where it was a) clean, b) good power and c) new......

    Most of the others died after being a) dirty, b) bad 3rd and 5th harmonics and c) 5+ years (constant running) old...... which is not ideal for any living thing let along a PSU.
    But alas that is what happens in the big jobs.
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  13. #13
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    A quick experimentation of gigabyte 550w odin when we couldn't get the usual wasn't a good choice... had a few crap out around the 2 year mark.

    Single biggest consumer of power is usually the graphics card. A GTX260 will consume a max of around 180W, I have two. Top end CPU's (for normal desktop, ie, 775, 1156, 1366) can run a little over 100W.

    Then it just comes down to the number of components (say, 2x gtx260, 8x hard drives, i7 CPU etc etc)
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  14. #14
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    Quote Originally Posted by Gremlin View Post
    A quick experimentation of gigabyte 550w odin when we couldn't get the usual wasn't a good choice... had a few crap out around the 2 year mark.
    :
    I swear I'm never going to buy another Gigabyte product ever again after all the problems I've had with their products.

  15. #15
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    Quote Originally Posted by avgas View Post
    Most of the others died after being a) dirty
    never really understood why computers don't come with filters, most heatsinks are basically a dust magnet. I've set up mine with a positive case pressure system and a pod filter on the instream, all boards are as clean as when they came out of the boxes. Is a bit fugly having a pod filter stick out the front though, have since made up V2 which has the filter and fan taking up 3 of the dvd drive bays, is a bit quieter that way too. V3 would have louvers on the front custom filter elements and ducting on the fan.

    Does this relate to the op you may ask, not really but I reckon its good info. Less dust = less heat buildup = more life = better value.
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •