This one here http://www.trademe.co.nz/Computers/C...-306263971.htm
Or this one here http://www.trademe.co.nz/Computers/C...-307041551.htm
This one here http://www.trademe.co.nz/Computers/C...-306263971.htm
Or this one here http://www.trademe.co.nz/Computers/C...-307041551.htm
Funny you ask that. I am just at this moment replacing a Themaltake PSU which is only 1 day old......
I think their quality must have gone down lately or something????
Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.
I always thought thermaltake was a good brand, work bought bout 20 of them and they are all going strong still. They have been thrashed quite a bit too as they are in custom applications. Maybe avgas just got a bad one? I'm also guessing being a more reputable brand they will be better for warranty servicing...
"A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal
That Thermaltake one should have enough current on the 12V rail for a decent gaming rig wouldn't it? I'm thinking about building up an i7 system at some stage with a 'decent' video card, so I don't want to have to upgrade the PSU in a year from now.
I wouldn't buy either. Remember psu's cannot deliver their rating consistently. Even a peak, most would probably fail. Currently got an antec 850W, but probably going to have to upgrade at some point.
I've had a look at this calculator here http://extreme.outervision.com/psucalculatorlite.jsp and it seems fairly accurate.
yep, then add at least 20% headroom. Ie, if the calculator says 400W, buy at least 500W, and decent quality. Modern hungry gfx cards will consume 100-200W quite happily.
3 actually.
But yeah usually really good gear. So I am very confused.
The i7 rig that I am currently setting up as a replacement SCADA server for a customer is only running 450 watts. Seems to be doing ok. But its only 8gb ram and 128mb graphics card.
Fucking 32bit programs have fucked up my day - looks like I am going to have to downgrade the win7 on it.
Fucking computers.
Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.
My Raidmax 450W does a good job, nice and quite with 120mm fan. runs my CAD machine
Also have 3 x antec 380w running 2 x 3.0 GHz quad cores with 512 graphics and a triple core.
Never had a PSU fail b4, a good 1 like a thermaltake will disconnect itself if put on a short or faulty device.
Replacing something a day old sounds like fixing a symptom not the cause...
I purchased a cheap PSU last year. Then i read a review online saying how crap it was which explained why my computer wouldnt work! Go Corsair they make seriously good stuff.
Just because a PSU says its 700W doesn't mean it is.
Yep.
Funny thing is the cause was not found. Everything else on that circuit is fine - leaving only the PC's to fault (not my boxes and he didn't have time to sort). So alas I figure we ended up with a bad batch. Had to help the guy out as he was presenting a 100K SCADA package and just had 3 out of 4 servers pop.
I have had many supplies die over the years. But this was the first time it had died in a situation where it was a) clean, b) good power and c) new......
Most of the others died after being a) dirty, b) bad 3rd and 5th harmonics and c) 5+ years (constant running) old...... which is not ideal for any living thing let along a PSU.
But alas that is what happens in the big jobs.
Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.
A quick experimentation of gigabyte 550w odin when we couldn't get the usual wasn't a good choice... had a few crap out around the 2 year mark.
Single biggest consumer of power is usually the graphics card. A GTX260 will consume a max of around 180W, I have two. Top end CPU's (for normal desktop, ie, 775, 1156, 1366) can run a little over 100W.
Then it just comes down to the number of components (say, 2x gtx260, 8x hard drives, i7 CPU etc etc)![]()
Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
never really understood why computers don't come with filters, most heatsinks are basically a dust magnet. I've set up mine with a positive case pressure system and a pod filter on the instream, all boards are as clean as when they came out of the boxes. Is a bit fugly having a pod filter stick out the front though, have since made up V2 which has the filter and fan taking up 3 of the dvd drive bays, is a bit quieter that way too. V3 would have louvers on the front custom filter elements and ducting on the fan.
Does this relate to the op you may ask, not really but I reckon its good info. Less dust = less heat buildup = more life = better value.
"A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks