FXR carb help

[Jubba]

http://www.trademe.co.nz/motors/moto...-401780559.htm

i put this on it

[Jubba]

does anyone have a fxr 150 carb fuel mix screw?

[Henk]

Possibly, in a dead FXR carb but given the state of my garage at the moment I won't know for sure until I load the van next weekend. If you get stuck let me know and I'll have a look and try and drag one to the track next Saturday. What happened to yours?

[Jubba]

i got it all going again with the new exhaust on and it all started fine but when i gave it any throttle at all it would just die.the fuel screw was a bit striped and i just made it worse so i had to drill it out.its OK tho i didnt get the thread or any thing so just need a new one hopefully.I'm getting short on days till the 17th.

[Jubba]

help.is anyone able to help ive still got to nilon my wire my oil and do my over flow and i dont have a working carb and racings next week im kind stuck.

[Henk]

Spend your time getting the nylon sorted and drilling holes to wire the sump plug, I've got plenty of lock wire so we can do that next Saturday if you don't have any. I have a stock FXR carb that is supposed to be good that I can lend you for the weekend and will try and find an air screw next Friday when I load up the van.
We'll probably be there about 9 Saturday and will be there until Michele gets bored, hopefully my thumb works well enough by then to let me race. Tip of the day is try not to run people over, the collateral damage can be annoying to say the least.

[cotswold]

We'll probably be there about 9 Saturday and will be there until Michele gets bored, hopefully my thumb works well enough by then to let me race. Tip of the day is try not to run people over, the collateral damage can be annoying to say the least.[/QUOTE]

As the for mentioned run over person it seems to be less of a long term problem to be run over than it does to do the running over, so let that be a lesson to you all, if a body is in front lying happily on the track try to avoid the pain of running it over.
Hope your digit is right soon

[Henk]

Hope your digit is right soon

So do I, you're getting ahead of me in the points and the October NI round is looming. That's the second time I've crashed trying to avoid running you over you suicidal maniac.

[cotswold]

So do I, you're getting ahead of me in the points and the October NI round is looming. That's the second time I've crashed trying to avoid running you over you suicidal maniac.

Ah that would be why you loaned me those wheels, you know you could just hang back and not harass me into making a mistake ?
I may not be at mt wllgntn this round as I have many bills to pay ( poxy Buell threw it's belt and the vans battery died ) and am trying to keep in the good books of her indoors, plus I want to go down to Kaitoki and that will cost me 2 months play money.
I will be bringing some kiwi red as I have been given a very cheeky Man of War Ironclad 2007 that should go down nicely.

[Henk]

If I had to choose between Kaitoke and Mt Welly I'd be heading south, in fact we are.

[Jubba]

[QUOTE=Jubba;1130140075][QUOTE=gav;1130138997]\I have a stock FXR carb that is supposed to be good that I can lend you for the weekend and will try and find an air screw next Friday when I load up the van.

thats wicked cheers mate.ill spend this week doing the rest.hopefully all will be well on sat will c you then

[Jubba]

What time to we need to be ther on sunday for racing?

[Henk]

Saturday is practice, gates open at about 9, no engines until 9:30, day ends about 3 or when everyone is bored with it.
Sunday gates open about nine, open pactice until 10-10:30 then graded practice until racing kicks off about 12.

[Jubba]

nice one see you sat mate

[Jubba]

made these up the other night after breaking one on sat.