Results 1 to 8 of 8

Thread: Handycam tape conversion.

  1. #1
    Join Date
    10th September 2008 - 21:23
    Bike
    Yamaha XV250
    Location
    te awamutu
    Posts
    2,214
    Blog Entries
    9

    Handycam tape conversion.

    I have been told that there is a RCA cable to USB adaptor that will allow transfer from a handycam cassette camera to a PC.

    Is this true? Thanks
    " Rule books are for the Guidance of the Wise, and the Obedience of Fools"

  2. #2
    Join Date
    2nd December 2009 - 13:51
    Bike
    A brmm, brmm one
    Location
    Upper-Upper Hutt
    Posts
    2,153
    yes but not the cheapest route, why cant you hook the cam straight to the PC???
    Science Is But An Organized System Of Ignorance
    "Pornography: The thing with billions of views that nobody watches" - WhiteManBehindADesk

  3. #3
    Join Date
    10th September 2008 - 21:23
    Bike
    Yamaha XV250
    Location
    te awamutu
    Posts
    2,214
    Blog Entries
    9
    Quote Originally Posted by Scuba_Steve View Post
    yes but not the cheapest route, why cant you hook the cam straight to the PC???
    No USB on the handycam. It is from the mid 90's. Was given to me and is perfect. Unfortunatly, was only meant to tranfer to a VHS or TV.
    " Rule books are for the Guidance of the Wise, and the Obedience of Fools"

  4. #4
    Join Date
    19th April 2009 - 18:52
    Bike
    SF
    Location
    Hamiltron
    Posts
    1,847
    This is probably what you're looking for. It even comes with video editing software

    http://www.trademe.co.nz/electronics...-431431656.htm

  5. #5
    Join Date
    10th September 2008 - 21:23
    Bike
    Yamaha XV250
    Location
    te awamutu
    Posts
    2,214
    Blog Entries
    9
    Quote Originally Posted by steve_t View Post
    This is probably what you're looking for. It even comes with video editing software

    http://www.trademe.co.nz/electronics...-431431656.htm
    Sent him a question and it is exactly what I want, will grab it closer to payday. Thanks for the link.
    " Rule books are for the Guidance of the Wise, and the Obedience of Fools"

  6. #6
    Join Date
    20th September 2009 - 14:02
    Bike
    A big Wheel, and a sponge bob scooter :P
    Location
    ...usually unsure
    Posts
    1,555
    Quote Originally Posted by awa355 View Post
    No USB on the handycam. It is from the mid 1800s!. Was given to me and is perfectly preserved. Unfortunatly, was only meant to tranfer to a rock face or cave wall.
    Fixed that for ya

    When Life thows me a curve
    ...I lean into it!

  7. #7
    Join Date
    10th September 2008 - 21:23
    Bike
    Yamaha XV250
    Location
    te awamutu
    Posts
    2,214
    Blog Entries
    9
    the missus is redecorating the cave, new skins on the walls so that rules out using the cave.
    " Rule books are for the Guidance of the Wise, and the Obedience of Fools"

  8. #8
    Join Date
    9th November 2005 - 18:45
    Bike
    2005 Z750S
    Location
    Wellington
    Posts
    1,136
    Quote Originally Posted by awa355 View Post
    Sent him a question and it is exactly what I want, will grab it closer to payday. Thanks for the link.
    I have one of these, bought from FirstIn.

    I got it so I could record stuff off the MySky recorder for the Wife (so she could give certain specialty programs to her folks).

    It sort of worked, but in the end was not quite good enough, and too much hassle, so just bought a HDD/DVD-R box, for her to use herself (which she then proceeded to not bother doing, and then her parents got Sky themselves so the whole issue became moot, except my wallet is still thinner, anyway...).

    You can have mine for the cost of postage.

    If you want it, give me a chance to make sure all the stuff is together.

    Disclaimer: when googling around for help on how to make the thing work better, I found that there were knock-offs of the EasyCap device floating around. I can't guarantee the one I got from FirstIn is "genuine".
    Measure once, cut twice. Practice makes perfect.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •