2 stroke engines from Thailand

[Bert]

Are there any KR150 engines available?

Kips or Super Kips power valve

Yes I think there were some 150's there. I was mainly looking at air-cooled. Are you interested in something like that?
As for the valves I'll have to check that out.

I think you will find there is quite a nice little market here for KR150 and RG150 (maybe not as much as 3-5 years ago).. Especially Barrels,head, cranks and maybe even carbs.

17' wheels could also be useful; but from memory most little bikes over there have real skinny wheels. Did the honda NS-1 ever make it that far south>???

[koba]

but from memory most little bikes over there have real skinny wheels.

Crossplies!

[husaberg]

Keep an eye out for any NSR150's or NSR125 would ya if the price is right.

[Ric]

Don't forget the Suzuki FXR/Raider 150 while you are there Cheers.

I'll keep an eye out.
I don't know what you guys pay for parts over there in NZ but I bought a new set of rings for my Suzuki yesterday and it was the equivalent of NZ$ 6.00.

[Ric]

Keep an eye out for any NSR150's or NSR125 would ya if the price is right.

There are a few nsr 150's around but not sure about the 125's.

[RDjase]

Yes I think there were some 150's there. I was mainly looking at air-cooled. Are you interested in something like that?
As for the valves I'll have to check that out.

Yep, KR150, If you see any find out what the availability and $ are please, There are casting numbers on the bottom of the cylinders, 1779, 1855 and 18?? might be 1828

RG150 as well if there are any, there are heaps of RG150's in the south island, would be more if there was some more engines

Are there any water cooled 100cc versions of KR's?

[Bert]

There are a few nsr 150's around but not sure about the 125's.

Don't they have 2.5-3.5 17' wheels?

Are there any water cooled 100cc versions of KR's?

Kawasaki AR80 LC???

Ric; I'd be interest in any TZR/TZM/TD?? 125/150 engine bits.

[Ric]

Yep, KR150, If you see any find out what the availability and $ are please, There are casting numbers on the bottom of the cylinders, 1779, 1855 and 18?? might be 1828

RG150 as well if there are any, there are heaps of RG150's in the south island, would be more if there was some more engines

Are there any water cooled 100cc versions of KR's?

What do the casting No's signify?

[Ric]

Don't they have 2.5-3.5 17' wheels?



Kawasaki AR80 LC???

Ric; I'd be interest in any TZR/TZM/TD?? 125/150 engine bits.

TZR 125's or 150's?

[Bert]

TZR 125's or 150's?

Yamaha TZR125 or Yamaha TDM150.
either or. engine parts are generally interchangeable. the 150 barrels would be good my another project other than bucket racing.

[RDjase]

What do the casting No's signify?

There is two different Super Kips engines (I think) and the early Kips engine. BUT I have got a 1995 Thai model with a Super Kips 1778 and a 1998 NZ model with the early Kips engine. Bit random with the engines and what went into what bike. Maybe two model 1855 as well, one has a O-Ring head

Trying to figure out what is what in via Thai and Jap site

[Ric]

There is two different Super Kips engines (I think) and the early Kips engine. BUT I have got a 1995 Thai model with a Super Kips 1778 and a 1998 NZ model with the early Kips engine. Bit random with the engines and what went into what bike. Maybe two model 1855 as well, one has a O-Ring head

Trying to figure out waht is what in via Thai and Jap site

Thanks for clarifying. I'll see if I can find out anymore here.

[Ric]

Don't they have 2.5-3.5 17' wheels?



Kawasaki AR80 LC???

Ric; I'd be interest in any TZR/TZM/TD?? 125/150 engine bits.

I'm not too familiar with these bikes but I'm told there are plenty around. Let us know what you're looking for specifically.

[Ric]

Don't they have 2.5-3.5 17' wheels?



Kawasaki AR80 LC???

Ric; I'd be interest in any TZR/TZM/TD?? 125/150 engine bits.

I don't think the wheels will be too hard to find.

[Bert]

I'm not too familiar with these bikes but I'm told there are plenty around. Let us know what you're looking for specifically.

Hi Ric.

I'm mainly interested in engine parts; namely cranks, cylinders and heads (and any condition accepted). entire motors would be great but hard to ship.
quite a number of the small yamahas (TZR, DTR, TDM etc.) all run the ~ same casings and internals.
I'll shoot you my email address and we can discuss this further.

Cheers
Brent