2 stroke engines from Thailand

**husaberg** · 11th July 2012, 16:57

Originally Posted by Ric

About $160 for the engine but shipping may not be easy. Crank about $35 bits and pieces fairly cheap

I really wouldn't mind a head or two and maybe a gearbox the shipping is the real scary part.

**Ric** · 12th July 2012, 14:11

Originally Posted by husaberg

I really wouldn't mind a head or two and maybe a gearbox the shipping is the real scary part.

I think I can get heads for about $35. Shipping on that wouldn't be too bad. They're quite light.

**husaberg** · 12th July 2012, 19:14

Originally Posted by Ric

I think I can get heads for about $35. Shipping on that wouldn't be too bad. They're quite light.

mmmmmmmm..........

**Ric** · 13th July 2012, 14:25

Originally Posted by husaberg

mmmmmmmm..........

To give you an idea on the shipping costs. It's about $35 for the first kilo and goes up about $15 per kilo from there. That's going with the local post office.
DHL. TNT etc don't cover this area but yesterday I found a local courier who works in with FedEx. I called FedEx and their charge was almost exactly double the above rates, so the options are limited.

**gammaguy** · 13th July 2012, 17:43

i want some RG150 engines

let me know what you can do for me

**gav** · 14th July 2012, 00:41

Has anyone on here dealt with Akunar ? http://www.akunar.com/
Are they usually pretty slow to ship stuff?

**Henk** · 14th July 2012, 01:01

Have bought off them in the past. Turned up in about two weeks if memory serves.

**Bert** · 14th July 2012, 09:05

Originally Posted by gav

Has anyone on here dealt with Akunar ? http://www.akunar.com/
Are they usually pretty slow to ship stuff?

Email them (Ranuka) directly; you can go through here: http://www.akunar.com/AKUNAR_CONTACT.htm
it helps with getting a better deal and/or faster response.
They don't always have some of the stuff on the webpage; then they go into sleep mode unless you harass them...

Originally Posted by Henk

Have bought off them in the past. Turned up in about two weeks if memory serves.

There shipping is pretty good once they actually find the stock and ship it....

Here's another group for that side of the world:
http://www.automotivespartsshop.com/
http://www.facebook.com/automotivespartsshop (while I can't stand facebook they have some interesting photos)
Mainly four stroke stuff.

**Ric** · 16th July 2012, 17:57

Originally Posted by gammaguy

i want some RG150 engines

let me know what you can do for me

I'll have alook and see what's around. Give me a couple of days

**Bert** · 25th July 2012, 18:35

first little package arrived today from Thailand.

Great little Barrel & Head, real good nick and it actually fits the casing; (even with being from completely different factories and bikes)....

Thanks Ric; challenge is now to find me another one

**Ric** · 28th July 2012, 13:23

Originally Posted by Bert

first little package arrived today from Thailand.

Great little Barrel & Head, real good nick and it actually fits the casing; (even with being from completely different factories and bikes)....

Thanks Ric; challenge is now to find me another one

Glad you're pleased.
I'll start looking for another one. Do you want the same parts plus valve and servo?
If it's hard to find are you interested in Tzr. I know there's a few of them around.

**RDjase** · 28th July 2012, 14:04

Have you got any pics of the wrecking yards?

I found some on a Jap site and it was huge, rows and rows of bike outside then a warehouse full off parts too

**speights_bud** · 28th July 2012, 16:05

Hiya, whereabouts are you located? as far as i have researched the Tyga Performance factory is located at the address below. I'm planning a trip over later next year but do you know anything about them or if its possible to go directly to the factory?

285/95 Moo5, Soi Naklua 16 Naklua, Banglamung, near Huai Yai, Bang Lamung, Chon Buri, Thailand

Cheers
Paddy

**Ric** · 2nd August 2012, 15:28

Originally Posted by RDjase

Have you got any pics of the wrecking yards?

I found some on a Jap site and it was huge, rows and rows of bike outside then a warehouse full off parts too

The place here probablly isnt as big as the Jap one. It's a village in the middle of nowhere that has turned into a recycling centre. About 8 bike yards with 60 - 120 bikes in each. I tried posting some photos but couldn't for some reason. If you email me I could send you some.

**Ric** · 2nd August 2012, 15:32

Originally Posted by speights_bud

Hiya, whereabouts are you located? as far as i have researched the Tyga Performance factory is located at the address below. I'm planning a trip over later next year but do you know anything about them or if its possible to go directly to the factory?

285/95 Moo5, Soi Naklua 16 Naklua, Banglamung, near Huai Yai, Bang Lamung, Chon Buri, Thailand

Cheers
Paddy

I'll see what I can find out about Tyga and whether it's possible to get into the factory.