Page 8 of 10 FirstFirst ... 678910 LastLast
Results 106 to 120 of 145

Thread: 1Tonne gear?

  1. #106
    Join Date
    9th May 2008 - 21:23
    Bike
    A
    Location
    B
    Posts
    2,547
    Quote Originally Posted by Coldrider View Post
    that could be it then, a square shaped tyre will cause oscillations from the rear, your gloves abrasion stemming from the vibrations on the grips as you are dampening the immenent tankslapper. problem solved.
    There is some slapping about to happen here alright, but it doesn't involve tanks...

  2. #107
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,853
    Quote Originally Posted by Coldrider View Post
    that could be it then, a square shaped tyre will cause oscillations from the rear, your gloves abrasion stemming from the vibrations on the grips as you are dampening the immenent tankslapper. problem solved.
    Sweet, well that clears that up then.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  3. #108
    Join Date
    4th April 2007 - 15:04
    Bike
    Kawasaki ZX6R
    Location
    Massey, Auckland
    Posts
    1,918
    Quote Originally Posted by ducatilover View Post
    You have seen the gloves in question first hand then? (Pun intended) Get over it, bunch of ninny-goats.
    Since you clearly missed the post earlier in the thread.


    http://www.kiwibiker.co.nz/forums/at...8&d=1329259824

  4. #109
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by Biggles08 View Post
    Since you clearly missed the post earlier in the thread. http://www.kiwibiker.co.nz/forums/at...8&d=1329259824
    So then it is entirely plausible that he had a set of gloves that could have been defective from the factory?
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  5. #110
    Join Date
    4th April 2007 - 15:04
    Bike
    Kawasaki ZX6R
    Location
    Massey, Auckland
    Posts
    1,918
    Quote Originally Posted by ducatilover View Post
    So then it is entirely plausible that he had a set of gloves that could have been defective from the factory?
    Plausable...unlikely but plausable.

    ***Begining of original point...now*** YOU CANNOT MAKE A JUDGEMENT CALL ON BRANDS OF PRODUCT BASED ON SECOND (OR THIRD) HAND PURCHASES ***end of point***

    Go buy a brand new set of gloves....go for 4 rides...then if this happens send them back for warantee. Not that hard really. Or...of course you could come on here spouting shit ablout how shit Revit gear is.

  6. #111
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by Biggles08 View Post
    Plausable...unlikely but plausable.
    I agree to an extent in regards to second/thrid hand stuff.
    But yes, it's possible they were a shit batch, might as well leave it at that.

    I still think 1tonne is good value gear.
    No idea about Revit, as with all brands you get mixed reviews and I won't bother commenting on Revit 'till I've owned some, which won't be happening soon as my current gear is excellent.
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  7. #112
    Join Date
    10th August 2008 - 19:29
    Bike
    Yahmama
    Location
    omnipresent
    Posts
    1,096
    Quote Originally Posted by Biggles08 View Post
    Acurate one too...I actually know Brett...who are you?
    Who are you....his fluffer boy?

    Every Quasi bashing thread, you come in on the defense. If Quasi wasn't such a cock, you would be redundant.

  8. #113
    Join Date
    20th October 2005 - 17:09
    Bike
    Its a Boat
    Location
    ----->
    Posts
    14,901
    Quote Originally Posted by Biggles08 View Post
    LOL...if you think that photo Maha put up in the thread where he actually sold them is "As New" then you're the dumbass...you can clearly see in the picture they are very second hand will good use. I'm not suggesting Maha is a lier or cheat and when he sold them he clearly thought they were in good condition..so either you have done something out of the ordinary with them or the owner before Maha did...anyway, that wasn't the point, Revit gear is good stuff and I have had a few suits/gloves that have never given me any trouble...AND I BOUGHT NEW FROM MOTOMAIL ***end point***
    Where does it say 'As New'..

    original post
    Heres another pair of Revit Gloves...same price $40.
    Fleece lined and super warm.
    Good visor wipe material can be seen on the right glove.


    Can you now stop making stuff up.

  9. #114
    Join Date
    4th April 2007 - 15:04
    Bike
    Kawasaki ZX6R
    Location
    Massey, Auckland
    Posts
    1,918
    Quote Originally Posted by Maha View Post
    Where does it say 'As New'..

    original post
    Heres another pair of Revit Gloves...same price $40.
    Fleece lined and super warm.
    Good visor wipe material can be seen on the right glove.


    Can you now stop making stuff up.
    Not you Maha...he said it in his post (Post #70)....I quote "I did get them from Maha and they were as new when I got them."

  10. #115
    Join Date
    4th April 2007 - 15:04
    Bike
    Kawasaki ZX6R
    Location
    Massey, Auckland
    Posts
    1,918
    Quote Originally Posted by short-circuit View Post
    Who are you....his fluffer boy?

    Every Quasi bashing thread, you come in on the defense. If Quasi wasn't such a cock, you would be redundant.
    Just because I think Brett is cute and I'd turn gay for him doesn't mean I'm his fluffer boy. Fact is (I know...this is KB and facts are very secondary) he was sales rep/terittory manager for a large motorcycle distribution company and has been involved in the motorcycling industry for a very long time. Brett sponsored me when he was owner of Qmoto and helped me out a lot, not just with gear but flying around the country north and south islands to help spanner for me at the Nationals....so I say it again, I know Brett well as a mate, my name is in my signature...who the fuck are you?

  11. #116
    Join Date
    13th May 2003 - 12:00
    Bike
    Thinking
    Location
    Around
    Posts
    7,383
    Quote Originally Posted by short-circuit View Post
    Who are you....his fluffer boy?

    Every Quasi bashing thread, you come in on the defense. If Quasi wasn't such a cock, you would be redundant.

    Eh, is this a Quasi Bashing thread? where................TigerTug is a cock thats about it
    anyway Short Circuit are you still a cock to or have you finally got over yourself?

  12. #117
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,853
    I will never buy or recomend a revit product.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  13. #118
    Join Date
    13th May 2003 - 12:00
    Bike
    Thinking
    Location
    Around
    Posts
    7,383
    Quote Originally Posted by nzspokes View Post
    I will never buy or recomend a revit product.
    Your Choice, sounds to me tho like you are just being obstinate.
    Revit makes all sorts of products and like most brands they get various products made for them (toll manufacturing) by companies all over the world
    Like all brands they do their best to ensure the required specs are up to scratch, but also like all brands sometimes there are issues, and it doesnt matter what brand it is........Astar, Dianese, or other types of products Cars, Puters your local curry shop ,its a fact of life.
    If you go to another brand you will again be at risk of buying something faulty, or not up to scratch.

  14. #119
    Join Date
    4th April 2007 - 15:04
    Bike
    Kawasaki ZX6R
    Location
    Massey, Auckland
    Posts
    1,918
    Quote Originally Posted by Quasievil View Post
    Your Choice, sounds to me tho like you are just being obstinate.
    Revit makes all sorts of products and like most brands they get various products made for them (toll manufacturing) by companies all over the world
    Like all brands they do their best to ensure the required specs are up to scratch, but also like all brands sometimes there are issues, and it doesnt matter what brand it is........Astar, Dianese, or other types of products Cars, Puters your local curry shop ,its a fact of life.
    If you go to another brand you will again be at risk of buying something faulty, or not up to scratch.
    I love it when you talk dirty...I'm so hot for you right now!

  15. #120
    Join Date
    20th March 2008 - 09:55
    Bike
    The Conscience
    Location
    Wainuiomata
    Posts
    363
    Quote Originally Posted by Quasievil View Post
    Your Choice, sounds to me tho like you are just being obstinate.
    Revit makes all sorts of products and like most brands they get various products made for them (toll manufacturing) by companies all over the world
    Like all brands they do their best to ensure the required specs are up to scratch, but also like all brands sometimes there are issues, and it doesnt matter what brand it is........Astar, Dianese, or other types of products Cars, Puters your local curry shop ,its a fact of life.
    If you go to another brand you will again be at risk of buying something faulty, or not up to scratch.
    Fair statement.
    "It is by will alone I set my mind in motion"



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •