![]()
Kinky is using a feather. Perverted is using the whole chicken
BMS hasn't existed in its original form for over a decade. Dallas sold out to some guy in Upper Hutt, but I've never been there. I always remember a mate Chris who used to work there (wgtn) describing the then new 851 as a crashed helicopter as it's what it looked like unclothed, guess the FI gubbins made it more complex than the Pantahs by 2.
Don't you look at my accountant.
He's the only one I've got.
You miss my point,so let me clarify.
Advertising and prestige is money in the bank for a manufacturer...look at Ferrari in F1 and Ducati in Superbikes,both factories have built their reputation on racing success and with it comes sales.
Honda knows this and Yamaha too,but to put them in charge of the GP regs is like putting beneficiaries in charge of social welfare or cops in charge of donut shops.
I don't blame Dorna for doing this as they are money-men and longterm thinking is not in their interest.But the factories sold them a lie and the motorcycling press were creaming themselves over the thought of GP reps for the road.
Like I said,Honda are still laughing all the way to the bank.
I still don't see why 2 strokes are any less relevant to road bikes as F1 is to cars. In fact F1 is totally alien to road cars.
Don't you look at my accountant.
He's the only one I've got.
Zen wisdom: No matter what happens, somebody will find a way to take it too seriously. - obviously had KB in mind when he came up with that gem
Artificial intelligence is no match for natural stupidity
Exactly Dave and was a big part of Honda selling the myth to Dorna.
Afterall the two stroke era gave us radial tyres,decent frames and suspension,powervalves and by association exup exhaust valves that all manufacturers adopted,radial braking and big bang crank timing...I could go on.
The modern four stroke era has given us...um...er...5 valve heads are all shit...um...er 990's are to dangerous...um...er 800's are to boring...um...er oh yeah electronic control to take the guess work out of riding skills.
Oh come on now, your comparing, what 50 years of GP racing 2 strokes to 10 years GP racing 4 strokes, hardly fair. I would sure as hell hope that they came up with a lot more advancments during the 2-stroke era considering that they had about 5x the development period. And if your trying to argue that there haven't been any frame, suspension, brake or tyre advances in the last 10 years, then you really need to get your head out of your 2-stroke ass.
Everything advances over time, if you don't keep up, you'll get left behind. Sorry, but the "glory days" of 2-stroke racing are in the past, get over it. Get excited about something new......
Disclaimer: I don't actually know what I'm talking about and everything I say should be taken as words of wisdom from a armchair general/mechanic/engineer/racer.
Comprehension is not your strong point is it son.
Those advancements would of come with the two stroke to you know.
The last ten years have just been refinements on what we already had with the two stroke era.
Try and remember that the argument from the manufacturers to Dorna (and to the world) to go fourstroke was sold as being more relevant to consumers.
Afterall how many V5/4 Honda race reps have you seen in your neck of the woods.I know Yamaha R1's are being sold on a crossplane crank but they're hardly flying out of showroom floors.
So are you saying they wouldn't have come along if there wasn't 2-strokes racing in GP's? Its all the same arguement, you are always going to get development on what is there. Boil it all down and your still working with a internal combustion engine (2-stroke or 4-stroke) that runs at somewhere between 20-30% efficiency.
Ok, so lets say, pneumatic valves, slipper clutches (or electronic engine braking), multiple engine mapping accessable on the fly, ect ect. Yeah, a lot of electronics there, but lets be honest, thats the way the world is going. (And yes, I am one of that generation who has never bought a newspaper.)The last ten years have just been refinements on what we already had with the two stroke era.
Probably about as many as large bore (greater than 125cc) 2-stroke engines that have been sold recently...........actually, probably less. (Talking road bikes specifically, not off-road)Try and remember that the argument from the manufacturers to Dorna (and to the world) to go fourstroke was sold as being more relevant to consumers.
Afterall how many V5/4 Honda race reps have you seen in your neck of the woods.I know Yamaha R1's are being sold on a crossplane crank but they're hardly flying out of showroom floors.
Even when 2-strokes were the king of GP racing, what was the ratio of 2-strokes vs. 4-strokes that were available to the public? I've been to a couple of classic bike show and swap meets, and the majority of bikes I see are 4-strokes. So it seems that the argument that the MSMA made for 4-strokes being more relevant to the consumer is correct........
Disclaimer: I don't actually know what I'm talking about and everything I say should be taken as words of wisdom from a armchair general/mechanic/engineer/racer.
Bottom line,GP racing used to be about going from point to point faster than the next guy.Now it's about selling product,be it roadbikes or TV packages.
Now go back to the top of page 6,make yourself a nice cup of tea and start reading again...then get back to me when you've got a clue.
Don't you look at my accountant.
He's the only one I've got.
APART from electronics, as these can be used on both 2 and 4 stroke, what has the fourstroke bought us development wise that's that much different than say the 1960's? Still four valve ( poppets ), still twin over head cam, still require many revs to make power ( BMEP is still much the same, just at a higher RPM ). Parts are lighter, a little less internal friction ( special coatings ). Not much excitement there!
Twostroke development was just getting started but the rules soon took care of that!
I think perhaps the " manufactures" didn't like the idea of modifying your twostroke with just a die grinder and a few clues. Fourstroke's are far more profitable to hot up with all that stuff, cams, valves, springs, pistons, etc, etc. The more you spend, the shorter the fuse.
The only fourstroke I have in my shed is sitting there waiting for it's 50hr piston change and I just can't get excited about it! I'd rather ride my "dirty old twostroke", way more fun.
Yeah i guess people move on and grow old plus all the fun probably went out of the sponsoring after Robert died as well.
Dallas used run an impressive stable of bikes. The 851 were brick like beneath the fairings, everything crammed on top of each other, Pasos were pretty damn ugly without the fairing as well.
I guess even the Italians don't see any need to make it pretty if no one ever sees it. i think it was Bordis first baby.
![]()
![]()
Kinky is using a feather. Perverted is using the whole chicken
The following is conjecture, I do not know the guy:
I think more he'd realised he'd created a white elephant that virtually no one could afford to buy but foresaw the market tanking. Was pretty much the biggest bikeshop in the country revenue-wise I understand (you wouldn't think so) & sold mail order to all around the globe, buying up all sorts of NOS.
It takes a smart businessman to build an empire, but a smarter one to know when the market is changing & skedaddle. Internet was the big unknown I guess.
Don't you look at my accountant.
He's the only one I've got.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks