New private parts sourcing man on the block

**Stormin'** · 3rd November 2013, 08:47

Hi Guys, it's been suggested that I get on here and let people know about what I do....

I am importing motorcycle parts, both new and used, cosmetic and performance. I am a one man show and handle your inquiries personally. I will find the parts you are after and give you as many options as possible, not just what 'I stock'. I am in contact with a lot of US and UK wreckers and performance parts suppliers so all you need to do is let me know what you are looking for and I will track it down. You can get a few ideas of things I regularly get in from my Trademe listings under username sportsbikenz or have a look at my site, which has contact facilities too www.storminbikes.co.nz Just ask about anything, doesn't hurt and doesn't take much time. I don't have shop and employee overheads so don't have to make big mark-ups on parts to survive, just enough to keep me going while at Uni and get me in beer. Discounts on orders of more than one part too as i don't need to add something to every part. Anyway, have a look and hopefully I can help some of you out. Thank, Norm.

**Shak** · 3rd November 2013, 09:07

Hi, able to get this?
http://www.kiwibiker.co.nz/forums/sh...-inlet-rubbers

**Stormin'** · 3rd November 2013, 12:08

250 stuff can be tricky to get as not all the international markets have/had 250s. Do you have the part number(s) at all? Thanks, Norm.

**300weatherby** · 3rd November 2013, 12:50

Just added you to my favourates, am always selling or buying bits for allsorts. Anything 675, give me a shout.

**jellywrestler** · 3rd November 2013, 13:06

Originally Posted by Stormin'

250 stuff can be tricky to get as not all the international markets have/had 250s. Do you have the part number(s) at all? Thanks, Norm.

first post says how good you are at getting parts then a guy asked you for a part including model and year and ya can't get even find a part number????
good luck with it all then eh!!

**gammaguy** · 3rd November 2013, 13:55

I have plenty of those in my warehouse in Japan

Drop me an email,or contact me at my website as below

**nzspokes** · 3rd November 2013, 14:12

Originally Posted by gammaguy

I have plenty of those in my warehouse in Japan

Drop me an email,or contact me at my website as below

Out of interest do you ever get complete bikes? One day in the future we could be looking for a Hornet 600, 98 to early 2k version.

**Stormin'** · 3rd November 2013, 15:19

Originally Posted by nzspokes

Out of interest do you ever get complete bikes? One day in the future we could be looking for a Hornet 600, 98 to early 2k version.

Not as yet. Still pretty small-time, but may be able to look into it oneday. Thanks, Norm.

**Stormin'** · 3rd November 2013, 15:24

Originally Posted by jellywrestler

first post says how good you are at getting parts then a guy asked you for a part including model and year and ya can't get even find a part number????
good luck with it all then eh!!

First of all... Thanks for the welcome for a new member. I really hope all users enjoy placing pointless sarcastic messages that have nothing to do with them! See, I can be sarcastic too. Secondly, if you read the post he put about the part he is looking for there has already been one reply where the part was misunderstood by the guy who answered him. I do not see any fault in trying to get as much information as possible to correctly identify and supply a part that someone is in need of and does not want to wait and then get the wrong part. Again, thank you and I hope we don't need to correspond again. I prefer to deal with polite and productive people who i may be able to help. Norm.

**nzspokes** · 3rd November 2013, 15:27

Originally Posted by Stormin'

First of all... Thanks for the welcome for a new member. I really hope all users enjoy placing pointless sarcastic messages that have nothing to do with them!

You know this is KB right?

**Stormin'** · 3rd November 2013, 15:41

Did I reply to the wrong message with that? Sorry, was supposed to go to the guy who wrote it. Again, sorry, new to this, Norm.

**Stormin'** · 3rd November 2013, 15:42

Originally Posted by jellywrestler

first post says how good you are at getting parts then a guy asked you for a part including model and year and ya can't get even find a part number????
good luck with it all then eh!!

Can't seem to find a way to reply to his message directly. Keeps replying to your original one, sorry.

**jellywrestler** · 3rd November 2013, 15:53

Originally Posted by Stormin'

First of all... Thanks for the welcome for a new member. I really hope all users enjoy placing pointless sarcastic messages that have nothing to do with them!

let me know your account number i can put some money in to help pay for your counselling...