Who wants decals cut?

**bogan** · 30th January 2014, 16:44

Originally Posted by MSTRS

and I can get on with selling the gear that this thread is about...

speaking of which, if you can be arsed bagging up some a4ish bits (like 20 bucks worth) of vinyl I got some vinyl cutters for my cnc I was planning on fucking about with at some point...

**MSTRS:Me** · 30th January 2014, 16:52

Come for a ride...you know you want to...you can pick out some scraps to tuck down your jacket.

**bogan** · 30th January 2014, 16:56

That's a good idea actually, I've been meaning to head over to hb for a while.

Which is to say, I'll flick you a pm if I ever actually manage it...

**MSTRS:Me** · 30th January 2014, 16:57

Don't leave it too long...

**bogan** · 30th January 2014, 17:02

If I'm honest, I expect I will. But, if I leave it long enough, I might just bring the van and pick up the whole lot...

**MSTRS:Me** · 30th January 2014, 17:04

This w/e would be just about long enough, don't you think?

**bogan** · 30th January 2014, 17:07

Errr, like this weekend but next year you mean? That should work, and hell, doug will probably have a polished frame for me to pick up by then as well

**MSTRS:Me** · 30th January 2014, 17:12

There seems to be plenty of interest, based on the PMs so to save a lot of repeating my self that way, here's the guff you all want to know...

The cutter is a Roland (which are bullet-proof and do not compare them to those cheapshit things out of China) with a used value of $?? The new equivalent is anything up to $5000.
The software was originally $7500, but was designed to run on W98. When XP came out, I was told my version wouldn't run...bullshit, it's fine on XP. It comes with a dongle that must be attached to a printer port for the program to run.
PC is an old HP Pavilion with 2 hard drives. Goes ok. Be worth $0.00. It will come with a number of useful programs and the discs, as well as sign software with discs and fonts. Corel X3 is also with it, but not the discs. Also has a scanner, a 19" flat screen, a printer and all the cables. Can all be demonstrated working.
Vinyl is prolly around $400
Striping would be maybe $5000 to replace
Then there is a load of squeegees, a stripe slitter, some other bits and pieces.
Also found some clear paint protection film. Used to be popular on the front of bonnets to stop stone chips. $200 worth?

The first to come up with $1500 buys the lot. Or you can fight each other by 'outbidding that bastard who got in first'...LOL!!