LED problems

**mike401** · 3rd April 2014, 17:49

Hi , so i put new led indicators on my R6, replaced the relay and there not really working. If i turn them on they will come on really dim and stay on and when i turn them off the will flash bright then turn off, also the dash light isnt working either???????

Any help would be much appreciated
Thanks

**Fern** · 3rd April 2014, 17:55

Did you change the relay to one suitable for led indicators?

**mike401** · 3rd April 2014, 18:18

Originally Posted by Fern

Did you change the relay to one suitable for led indicators?

Yip sure did

**bogan** · 3rd April 2014, 18:20

Originally Posted by mike401

Yip sure did

Is it a good one? I got a few off ebay that were dodgy shitters.
Post up wiring diagram if you can find one; hard to fault diagnose it without one.

**mike401** · 3rd April 2014, 19:24

Originally Posted by bogan

Is it a good one? I got a few off ebay that were dodgy shitters.
Post up wiring diagram if you can find one; hard to fault diagnose it without one.

brought it way overpriced of trademe, hmmmmmm the indicators are crappy Chinese ones

**bogan** · 3rd April 2014, 20:11

Originally Posted by mike401

brought it way overpriced of trademe, hmmmmmm the indicators are crappy Chinese ones

3pin one?

When I was looking on TM after my ebay ones shat out I found many over-priced ones in the same brand. They were still load sensing, and not calibrated to the load of the indicators I had (also ebay ones).

**mike401** · 5th April 2014, 14:24

Originally Posted by bogan

3pin one?

When I was looking on TM after my ebay ones shat out I found many over-priced ones in the same brand. They were still load sensing, and not calibrated to the load of the indicators I had (also ebay ones).

Idiot

, haha the battery gone flat while i was messing around with it. Now just got to find out why the dash light isn't working.

**bogan** · 5th April 2014, 14:40

Originally Posted by mike401

Idiot

, haha the battery gone flat while i was messing around with it. Now just got to find out why the dash light isn't working.

So the indicators work find with the charged batt now? I think dash light often has something to do with it normally grounding out through the other indicator.