I didn't know mechanical and project engineers qualified.
Of course the main reason they've had to get so many immigrants is that NZer's simply aren't up to the task. Why don't you ask some of your pals on the night shift restocking shelves at Pak 'n' Slave with you if they even finished high school...
If it wasn't for a concise set of rules, we might have to resort to common sense!
colemans arent that bad at all have had some really good deals from alastair and willnot shop anwhere else.
Would the last person to leave NZ please turn the lights out. I am in the position of seeing it from all sides and without time to engage in a large diatribe it is not as black and white as many of you guys see it. Suffice to say the cost of doing business in NZ is very high, the returns at the end of the day are very average and an isolated country of low population magnifies many of the stocking issues for distributors. How can everything be stocked with a good stock turn when we have such a small population, half of it on welfare....
Every overseas purchase is a kick in the guts for the employment prospects of joe average New Zealander, FACT.
The retail stuff I buy is the least of my purchases at my friendly dealer. You'd be surprised how quickly stuff will get turned around for you if you behave in a friendly and polite fashion.
There usually is only $50 or so difference, mostly less, in Internet purchases. The whole shipping thing from the US is a nightmare. Fed-Ex and UPS charge a freaking fortune including insurance which some vendors insist on.
I bought stuff of Shaun Harris for the Zed. He got the Ohlins sprung and setup for my bike before it went out the door. It cost me no extra, but it was right first time, no screwing about, and he genuinely gave a shit about how it had worked out for me. I'll taken personal service over a muntered box and no recourse any day.
If a man is alone in the woods and there isn't a woke Hollywood around to call him racist, is he still white?
at the end of the day, $150 for a light bulb is a complete ripp off. I hate having to pay $60 for some o rings, $100 for a set of bolts. $300 for a waterpump.
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
Something no-one's mentioned is that I'd imagine brand dealerships have to stock and obtain factory parts, and don't necessarily have the luxury of obtaining parts through alternative sources.
That doesn't excuse shit service though.
I value loyalty very highly: I tend to be loyal to stores that treat me OK, and if I'm committed to buying goods or services with them instead of shopping around for the cheapest I can find, I expect they'll treat me OK in return.
That's why I keep going back to Motohaus: Kerry is pretty much straight with me, so I buy as many of the things I need from him as I can, and because I do that, he gives me good prices in return. However, the bottom line is I know he has to make a living, so I don't expect him to do stuff for free (although sometimes he does), or to sell me stuff at a loss, just to meet a price I saw somewhere else.
The best example of pragmatic thinking I've come across is a computer supply /service company that used to share the premises of a software company I worked at in the late 90s. This was the time of expensive IBM products and cheap clones starting to come on the market. The owner aimed to make 30% margin overall, which meant a profitable company. Time and again, he had customers saying, "Why are you so dear? I can get this product at Joe's Computers down the road for $150 less!"
His answer: "You buy it there then, if price is important to you. But I'll see you six months down the line, when the computer craps out and Joe's gone out of business."
And more often than not, that's what happened.
Heh. There was one building in our street that saw a procession of one 'fly by night' PC importer/dealer after another - something like 6 or 7 in two years. All but one went bust; the one that didn't had such a good business model that they had to move to bigger premises.
... and that's what I think.
Or summat.
Or maybe not...
Dunno really....![]()
I agree its not all about price. Quality, lead time then price. If you haven't got the first two then price is irrelevant. I do also agree about relationship building. I'll give you a good example of this. I brought a charger for an i-pod off an internet sight in NZ. When i ordered online a conformation e-mail was sent immediatly notify me it was in stock and would be shipped the next day. The next day i received an e-mail to say that it had been shipped with the tracking number. That day i receved the goods. It was packaged well, proffesionally labelled. When i opened the box there was a complimentary pen and a thankyou note for buying their product. The next day i received a call to make sure i had recived the goods and if the service was satisfactory. This going the extra mile didn't cost them much at all, although I became one of their best salesmen, telling all that would listen what a fantastic company and service they provided. Colemans have the same opportunity but decline to use it. Why??????
cycletreads also take not of what uksteve just said.
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
For the record, I needed a new bolt for my Z. (One fell off; another story.)
Used www.Kawasaki.com to get part number of bolt.
Ordered from Motorad over the phone.
Got here in just three days. (Two nights)
Only $7.50 so I got two, just in case.
(I don't think that's a bad price for a genuine - made in Japan exactly the same as the other three similar bolts still on the bike - bolt).
They were friendly too.
Measure once, cut twice. Practice makes perfect.
Customers are a great sales tool, but the old saying is "People will tell 10 people (or hundreds if they piss off a KBer) about bad service and one about good" Personally I agree with the above comments, Jamie at Whangarei Yamaha provides great service at good prices, has done since i went to him to get parts for my last bike. in fact was good enough I bought my XVS off him this year.
The 2 things to remember is know your prices and build a relationship with a parts retailer (either dealership or Repco type company)
At the risk of being sent to the corner with the D hat on..
I've found Coleman's to be alright. I'm buying a brand new bike off them today. Matt the salesman has always been alright with me. Always friendly and chatty, even though I've never bought anything from them in the past. Never hassled me into buying anything, or to go out for a testride on things, just to force a sale. He's even knocked me a fair few bucks off a bike that was already up at a discount price.
I've never bought any 'spares' from them. But to be honest, if I was buying a bulb for a bike, I'd have gone to Repco anyway.
It's only when you take the piss out of a partially shaved wookie with an overactive 'me' gene and stapled on piss flaps that it becomes a problem.
And the problem is as soon as someone did it cheap AND well IBM died. Dell took over and everyone who purchases a machine off them has the machine made to order in Singapore (or somewhere). Whens the last time you saw someone buy a new IBM pc?
This is whats happening to dealers. TRADEME is allowing loads of cheap 'shops' and its becoming a de-facto choice when shopping around.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks