Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: TT500 shock suggestions

  1. #1
    Join Date
    25th April 2006 - 19:53
    Bike
    1972 Yamaha XS2 650
    Location
    Sunny Nelson
    Posts
    672

    TT500 shock suggestions

    What would you recommend as a good set of shocks for a 1980 TT500? the one I just bought had been stolen and recovered without them so I don't have to worry about what to do with the old ones - if you look at the photos you'll see why! http://www.kiwibiker.co.nz/forums/sh...ad.php?t=67865

    I reckon they want to be around 370mm eye to eye (14.5") not too sure, but I want to be able to touch the ground. What aftermarket shocks are any good?

  2. #2
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Wired1 View Post
    What would you recommend as a good set of shocks for a 1980 TT500? the one I just bought had been stolen and recovered without them so I don't have to worry about what to do with the old ones - if you look at the photos you'll see why! http://www.kiwibiker.co.nz/forums/sh...ad.php?t=67865

    I reckon they want to be around 370mm eye to eye (14.5") not too sure, but I want to be able to touch the ground. What aftermarket shocks are any good?
    Ohlins classic mx shocks ( prebuilt ) in either single tube or piggyback reservoir. Either way they are not ''dial a backache'' shocks like the cheap and nasty ones on the market and there is something else unique, full and proper backup. They also have ( in both options ) a dividing piston to seperate the gas charge from the oil so they dont turn into a milkshake shock internally.

    Or we can custom build a set of Aberg replica shocks off the archival spec card.

    The result is totally proprtional to the cost

  3. #3
    Join Date
    25th April 2006 - 19:53
    Bike
    1972 Yamaha XS2 650
    Location
    Sunny Nelson
    Posts
    672
    Quote Originally Posted by Robert Taylor View Post
    Ohlins classic mx shocks ( prebuilt ) in either single tube or piggyback reservoir. Either way they are not ''dial a backache'' shocks like the cheap and nasty ones on the market and there is something else unique, full and proper backup. They also have ( in both options ) a dividing piston to seperate the gas charge from the oil so they dont turn into a milkshake shock internally.

    Or we can custom build a set of Aberg replica shocks off the archival spec card.

    The result is totally proprtional to the cost
    What do a set of Ohlins cost? the piggy back ones look cool.

  4. #4
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Wired1 View Post
    What do a set of Ohlins cost? the piggy back ones look cool.
    They also work even better than they look. PM me and I will provide some options.

  5. #5
    Join Date
    25th April 2006 - 19:53
    Bike
    1972 Yamaha XS2 650
    Location
    Sunny Nelson
    Posts
    672
    Thanks for your help Robert, I'll see how the budget stacks up at the end of the project. There's no doubt a set of Ohlins would look and work the best but I have to keep my hobbies under the radar on the home front if you know what I mean. I'll probably do everything else first then swap out the shocks at the end so for now I'll just put something in that's the right length.

    I'd like to hear from other members as to their experiences with some of the cheaper brands. I have had suggestions of Hagon and Progressive as two that are used on the VMX thumpers but I have have had both good and bad reports of both. What other brands are you running?

  6. #6
    Join Date
    12th January 2004 - 12:00
    Bike
    '87 CR500, '10 RM144
    Location
    'Kura, Auckland, Kiwiland
    Posts
    3,728
    If it were mine, I'd scan the globe and find some Fox Airshox for it.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	HL500_profab_750.jpg 
Views:	38 
Size:	252.8 KB 
ID:	87901  
    Drew for Prime Minister!

    www.oldskoolperformance.com

    www.prospeedmc.com for parts ex U.S.A ( He's a Kiwi! )

  7. #7
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Wired1 View Post
    Thanks for your help Robert, I'll see how the budget stacks up at the end of the project. There's no doubt a set of Ohlins would look and work the best but I have to keep my hobbies under the radar on the home front if you know what I mean. I'll probably do everything else first then swap out the shocks at the end so for now I'll just put something in that's the right length.

    I'd like to hear from other members as to their experiences with some of the cheaper brands. I have had suggestions of Hagon and Progressive as two that are used on the VMX thumpers but I have have had both good and bad reports of both. What other brands are you running?
    No worries, I understand that! Bear in mind that with respect to the cheap brands you mention we have supplied / built a lot of Ohlins twin MX shocks for people that have come off those and are sick and tired of riding on ''dial a backache'' shocks. You may get people who say they are okay but invariably have not ridden on anything better as a basis of comparison. What I have just rattled off is brutal but it is also factual.

  8. #8
    Join Date
    25th April 2006 - 19:53
    Bike
    1972 Yamaha XS2 650
    Location
    Sunny Nelson
    Posts
    672
    Quote Originally Posted by DEATH_INC. View Post
    If it were mine, I'd scan the globe and find some Fox Airshox for it.
    Oh yeah, is that your HL500? haha

  9. #9
    Join Date
    24th September 2004 - 06:46
    Bike
    '76 CB550 Super Sport
    Location
    On the road to nowhere...
    Posts
    7,414
    Quote Originally Posted by Robert Taylor View Post
    No worries, I understand that! Bear in mind that with respect to the cheap brands you mention we have supplied / built a lot of Ohlins twin MX shocks for people that have come off those and are sick and tired of riding on ''dial a backache'' shocks. You may get people who say they are okay but invariably have not ridden on anything better as a basis of comparison. What I have just rattled off is brutal but it is also factual.
    Ever considered some folk use both quality branded shocks and budget items?

    In no way am I questioning your expertise btw, but budget items do have their place in the market.

  10. #10
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Bonez View Post
    Ever considered some folk use both quality branded shocks and budget items?

    In no way am I questioning your expertise btw, but budget items do have their place in the market.
    Indeed budget items have their place but my point is very clear, the performance of such items is almost universally proportional to the sum spent. You are not going to get Ferrari performance if you have spent Hyundai price...

  11. #11
    Join Date
    12th January 2004 - 12:00
    Bike
    '87 CR500, '10 RM144
    Location
    'Kura, Auckland, Kiwiland
    Posts
    3,728
    Quote Originally Posted by Wired1 View Post
    Oh yeah, is that your HL500? haha
    .....I wish
    Drew for Prime Minister!

    www.oldskoolperformance.com

    www.prospeedmc.com for parts ex U.S.A ( He's a Kiwi! )

  12. #12
    Join Date
    24th September 2004 - 06:46
    Bike
    '76 CB550 Super Sport
    Location
    On the road to nowhere...
    Posts
    7,414
    Quote Originally Posted by Robert Taylor View Post
    Indeed budget items have their place but my point is very clear, the performance of such items is almost universally proportional to the sum spent. You are not going to get Ferrari performance if you have spent Hyundai price...
    From a true salesman. Budget items have worked fine and dandy for 10s of thousand kms for a lot of folk and will continue to do so.

    Oh and Hyundais would probably be more suitable to imperfect NZ roads than any Ferrari.

  13. #13
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Bonez View Post
    From a true salesman. Budget items have worked fine and dandy for 10s of thousand kms for a lot of folk and will continue to do so.

    Oh and Hyundais would probably be more suitable to imperfect NZ roads than any Ferrari.
    Yep, mediocrity suits some. When you sell a quality product to someone who has used something mediocre it really reinforces just how mediocre the discarded product was.

  14. #14
    Join Date
    24th September 2004 - 06:46
    Bike
    '76 CB550 Super Sport
    Location
    On the road to nowhere...
    Posts
    7,414
    Quote Originally Posted by Robert Taylor View Post
    Yep, mediocrity suits some. When you sell a quality product to someone who has used something mediocre it really reinforces just how mediocre the discarded product was.
    Some products are over priced.

  15. #15
    Hyundai's are under rated....so are budget anythings.I used some budget TT500 shocks on my TLR200 - modified them to get the spring preload right,changed to a lighter oil.And they were very good for 6 years,until a prang bent them.So I got some more freebee TT500 shocks and modified them the same.Don't tell me I was ripped off.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •