Does anyone know if there are any stockists in NZ for the plate/ind mount, that replaces the ugly stock set up ?
Found some on ebay ex the uk but would like one yesterday if i could !
Thanks in advance
Just a Dog
Does anyone know if there are any stockists in NZ for the plate/ind mount, that replaces the ugly stock set up ?
Found some on ebay ex the uk but would like one yesterday if i could !
Thanks in advance
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
i'm motarded
what one are you looking at getting? i looked at a few but decided to make my own.Originally Posted by sinfull
Just a Dog
Looked at making/getting one made, but since i have the problem of no garage (bikes parked throughout the house), or even the tools needed to do anything other than basic maint, i went on the hunt for one !
Found this one on ebay for $79 us
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
i'm motarded
fark thats a sharp price.
heres some more options
http://www.british-customs.com/trium...-pr-16550.html
http://www.british-customs.com/mad-d...1-pr-1691.html
http://www.jacklilley.com/view_part....3&part_id=5254
http://www.jacklilley.com/view_part....3&part_id=5339
http://www.jacklilley.com/view_part....3&part_id=4379
Just a Dog
Beauty Nodrog, see what ya mean by sharp price now, ouch some of them were over the top lol, that last link looks similar to the one i was looking at and sim priced !
Money spent on this bike is slowly creeping up lol, Just got it out of the shop (close to a grand later), put it in thinking 1st service, but got em to go over it and they found heaps of dodgy workmanship, wrong bolts holding front axle in (lucky the two threads they were holding with, never let go on the ride down from aucks) to the wiring loom being all mixed up (no idea why) !
Going and looking good now, just the ugly fender to sus And revinning (hope that goes smoothlyas its an insurance job), will put up with the scrape on the case and chips in the paint !
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
i'm motarded
yeah some of them aint cheap, thats why i am making my own, just waiting for my intergrated tailight to turn up so i can fit it up.
Pasta farts
Pay attention S3 owners considering an eliminator. If you're gonna ride on a wet road you'll get shit all up your back and over the tail of the bike because of where the body stops vs where the tyre ends. Hence why the stock one is so long and skinny!
i'm motarded
yep, thers always a price to looking cool
ZZZZZZZZZZ
At least then you'll get something that fits the NZ licence plate. Don't buy one from the UK as your plate will not fit between the cans.
That first link of nodrogs with the "Clear Alternatives" package is a sharp price and not a bad option!
The second link with the "Mad Doctor" will not work either with our plates. That exhaust shown sits a little higher than stock and still our plates won't fit. I know, I have one.
Here's an old pic with the integrated tailight and home made eliminator from my bike. It fits better now!
Just a Dog
Well i guess i'll have to take the Mrs every where with me in future lol
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
Man, you are too square.
If you do get a tail tidy and you want to get rid of the old stock unit, I am in the market for one. I need to get my bike legal while I wait for some parts from the US.
Just a Dog
will pm ya
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
Just a Dog
Well bikes back at home after a week of revinning hoop jumping and i sat down and started designing a tail tidy of my own ! One that fits ind. num pl. light and reflector !
Now all i need is a friendly engineer who will cut/drill/fold/weld it up for me like yesterday so i can have it on b4 the duck this weekend !
Question i have is alloy or steel ? Which would handle any vibration there might be better ?
Thinkin steel, as black is my preferred colour though know i could polish the alloy up to look like chrome it aint really my bling !
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
i'm motarded
i made mine out of stainless, tough as, and can be made shiny, but i painted mine matt black
Just a Dog
Haha painted stainless adhesion might be an issue later though, it just dont seem right to have bling hangin out your arse does it !i made mine out of stainless, tough as, and can be made shiny, but i painted mine matt black
Dont want to use too heavy guage steel, as i'm using the two back bolts that screw into the carbon tail, thats left after the rubbish is unbolted, is that where yours is mounted or ya gone forwards to the formost two bolts ?
A girlfriend once asked " Why is it you seem to prefer to race, than spend time with me ?"
The answer was simple ! "I'll prolly get bored with racing too, once i've nailed it !"
Bowls can wait !
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks