Results 1 to 6 of 6

Thread: Gutless pw50

  1. #1
    Join Date
    2nd August 2006 - 22:17
    Bike
    hopefully bringing something back to NZ
    Location
    Hartford Connecticut USA
    Posts
    4,109

    Gutless pw50

    Play on words i know but iahve checked clutch wear and its within spec the thing starts first kick runs well and gose ok on the flat but as soon as it get to a small incline it slow to a complete stop revs just feels like the clutch is slipping??? any ideas kids want to ride it again.
    [SIGPIC][/SIG

  2. #2
    Join Date
    20th May 2007 - 12:04
    Bike
    various
    Location
    HB
    Posts
    2,881
    Blog Entries
    13
    Quote Originally Posted by barty5 View Post
    Play on words i know but iahve checked clutch wear and its within spec the thing starts first kick runs well and gose ok on the flat but as soon as it get to a small incline it slow to a complete stop revs just feels like the clutch is slipping??? any ideas kids want to ride it again.
    Can't remember the motor setup, but if she has a wet clutch? then perhaps wrong oil? Car oil does that to them.

    May the bridges I burn light the way.

    Follow Vinny's MX racing on www.mxvinny.com


  3. #3
    Join Date
    2nd August 2006 - 22:17
    Bike
    hopefully bringing something back to NZ
    Location
    Hartford Connecticut USA
    Posts
    4,109
    it say use 10-30 sae which is what its got in it im starting to think its just not getting enough power out as i found a web site had a read atried it with out the muffler ran heaps better so going to try that avenue next.
    [SIGPIC][/SIG

  4. #4
    Join Date
    1st September 2007 - 21:01
    Bike
    1993 Yamaha FJ 1200
    Location
    Paradise
    Posts
    14,125
    Blog Entries
    2
    The clutch plates...if it has any...centrifical clutch and all that. If it does have any, take them out and rough them up with a bit of coarse sandpaper and try again
    When life throws you a curve ... Lean into it ...

  5. #5
    Join Date
    20th May 2007 - 12:04
    Bike
    various
    Location
    HB
    Posts
    2,881
    Blog Entries
    13

    Smile

    Quote Originally Posted by barty5 View Post
    it say use 10-30 sae which is what its got in it im starting to think its just not getting enough power out as i found a web site had a read atried it with out the muffler ran heaps better so going to try that avenue next.
    Your muffler is clogged up! She can't breathe. You need to clean it out. Costic soda does the trick. Plugg the muffler and fill up with costic soda (watch your hands and eyes, dangerous stuff!!) leave inside for 24 hours, then flush out with water and U be away!

    May the bridges I burn light the way.

    Follow Vinny's MX racing on www.mxvinny.com


  6. #6
    Join Date
    13th April 2007 - 18:26
    Bike
    06 scrambler,xrl,
    Location
    In town. Crap
    Posts
    4,155
    Blog Entries
    1
    Also check the exhaust port. Buggars can close up to the size of a pin prick if cheap two stroke oil has been used.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •