Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 33

Thread: DR-Z400E road legal

  1. #16
    Join Date
    11th July 2008 - 20:05
    Bike
    Agent Orange
    Location
    Paradise
    Posts
    915
    Quote Originally Posted by Tony W View Post
    I got better fuel economy after pipe, airbox and needle mod, on my SM.
    Currently 26km/L in touring mode.
    Average 190km to reserve on std 10.5L tank.

    Good choice, by the way.
    I was wondering when we'd hear from you Tony........
    And how the hell do you manage 26km/litre, what carb are you running? What's ya secret, tiny jets? We all know you are capable of givin it the berry occasionally!
    Mines the Keihin FCR carb and is a tad hungry with the airbox mods, and needle on 5th clip, and a 162 main jet, which I think is still running a bit rich. I think I'll try a 157 next. Factory setting is a 142.5 with no airbox mod, standard pipe.

  2. #17
    Join Date
    13th April 2008 - 09:52
    Bike
    Suzuki DRZ400 SMK5 with knobblies
    Location
    NAPIER
    Posts
    684
    Quote Originally Posted by CrazyFrog View Post
    I was wondering when we'd hear from you Tony........
    And how the hell do you manage 26km/litre, what carb are you running? What's ya secret, tiny jets? We all know you are capable of givin it the berry occasionally!
    Mines the Keihin FCR carb and is a tad hungry with the airbox mods, and needle on 5th clip, and a 162 main jet, which I think is still running a bit rich. I think I'll try a 157 next. Factory setting is a 142.5 with no airbox mod, standard pipe.
    Hi there Crazy.

    Mine has the Mikuni with the factoy jetting.
    The needle has been raised by .75mm (only because that was the smallest washer I could find in the shed !)
    The needle raising cured a very mild fluffing the engine had on light throttle at cruising speed after I had done the pipe and box mods

    Noone told me my Mikuni carb was crap until I read these forums !!! so I guess it must be...?! and I will adjust my riding accordingly.

    I would advise you to go back to factory jetting and test your way up from there.

    Cheers

  3. #18
    Join Date
    13th April 2008 - 09:52
    Bike
    Suzuki DRZ400 SMK5 with knobblies
    Location
    NAPIER
    Posts
    684
    Forgot to mention that I run 16/41 gearing on 17'' wheel and 16/43 on 18'.

    IMO they are undergeared for distance riding, after performance improvements have been made.

    I would guess this is way taller than than most are running.

  4. #19
    Join Date
    12th June 2007 - 21:13
    Bike
    Africa Twin / XRV 750 (RD04L)
    Location
    Kapiti Coast
    Posts
    1,077
    Blog Entries
    6
    yep, I'm 15/44 for adv riding which gives a tall and luggy first gear on ruff stuff. 15/48 for trail oriented adv riding gives a workable range and then maybe a 14/48 for pure trail riding.
    There are two kinds of adventurers: those who go truly hoping to find adventure and those who go secretly hoping they won't. We should come home from our adventures having faced their perils and uncertainties, endured their discomfort and beaten the odds, with a sly acknowledgment and revitalised solidarity of character.

  5. #20
    Join Date
    19th August 2003 - 15:32
    Bike
    RD350 KTM790R, 2 x BMW R80G/S, XT500
    Location
    Over there somewhere...
    Posts
    3,954
    Quote Originally Posted by Mystic13 View Post
    Yep, completely the same. I think the Kawasaki even comes with a made by Suzuki badge from memory.

    Good luck with the sale and hunt for one.
    The KLX has a different (slightly louder) muffler for some reason.
    I swapped one onto my DRZ.

  6. #21
    Join Date
    26th January 2005 - 11:33
    Bike
    10 HUSQ TE310, 06 HONDA HORNET 900
    Location
    Nelson
    Posts
    1,140
    NO

    the KLX is not the same!!!!, it has green plastics! ;D

    yea it does have suzuki stamped on it :P manufactured by suzuki corp

  7. #22
    Join Date
    3rd August 2006 - 19:35
    Bike
    B12
    Location
    West Auckland
    Posts
    2,800
    Engine Case armour is seriously recommended...
    Quote Originally Posted by NinjaNanna View Post
    Wasn't me officer, honest, it was that morcs guy.
    Quote Originally Posted by Littleman View Post
    Yeah I do recall, but dismissed it as being you when I saw both wheels on the ground.
    Quote Originally Posted by R6_kid View Post
    lulz, ever ridden a TL1000R? More to the point, ever ridden with teh Morcs? Didn't fink so.

  8. #23
    Join Date
    15th March 2004 - 13:00
    Bike
    Austrian and Italian
    Location
    Glenfield, Auckland
    Posts
    4,687
    Quote Originally Posted by Morcs View Post
    Engine Case armour is seriously recommended...
    Only when you're riding it

  9. #24
    Join Date
    12th June 2007 - 21:13
    Bike
    Africa Twin / XRV 750 (RD04L)
    Location
    Kapiti Coast
    Posts
    1,077
    Blog Entries
    6
    or when your name is Zerax and you have to lower your rear susp so much that the stand causes the bike to fall over in the wind... joking Z.

    But yeah, the cases are very thin and the gear lever has very sharp edges worthy of filing into a curve!
    There are two kinds of adventurers: those who go truly hoping to find adventure and those who go secretly hoping they won't. We should come home from our adventures having faced their perils and uncertainties, endured their discomfort and beaten the odds, with a sly acknowledgment and revitalised solidarity of character.

  10. #25
    Join Date
    30th March 2008 - 18:31
    Bike
    Husqvarna 701E - WR250F - Can Am 500
    Location
    The Mighty Waikato
    Posts
    1,081
    Quote Originally Posted by buggsubique View Post
    Ideally youll be getting the FCR rather than the less exhilarating Mikuni which the SMs and I think the 06 onwards E's come with (might be wrong there).
    All E models come with the FCR carb.

    Quote Originally Posted by buggsubique View Post
    on stock tank I get about 16km/L. I run the FCR, custom header and barkin loud yoshi pipe with an open airbox and I'm like a schoolboy with the right wrist. Very responsive but thirsty. I did the DB1k on it and carried a 10L jerrycan on the rear rack as I only have a stock 9 or 10L tank. Never sucked it dry but hit reserve at around 135-150km depending on the terrain.

    Also I run it on 95 or 98. Makes a real difference in response.
    I get between 150 -170 Kms to a tank before reserve.
    Am running 15 / 44 gearing which is the standard for the S model.
    Minimum fuel octane rating for DRZ is 95.



    Quote Originally Posted by CrazyFrog View Post
    Mines the Keihin FCR carb and is a tad hungry with the airbox mods, and needle on 5th clip, and a 162 main jet, which I think is still running a bit rich. I think I'll try a 157 next. Factory setting is a 142.5 with no airbox mod, standard pipe.
    I am running a 150 main jet with the baffle removed from the standard muffler and the air box rubber snorkel removed. I have owned an older DRZ with a pro circuit pipe on it and the mods to the standard pipe and rejetting of carb etc give the same power gains and can readily be put back to standard if required.


    There have been no changes at all since the 2003 Model ( other than graphics/colours ) which had an uprated cam chain tensioner and a better quality rear shock with both high and low speed compression adjustments and different seat foam.
    Here for a good time, not necessarily a long time

  11. #26
    Join Date
    4th September 2006 - 21:13
    Bike
    2009 DRZ400e
    Location
    Australia
    Posts
    1,363
    Hey...Haven't had time to read the thread but I'm sure I'm basically gunna say the same as every one else

    Done over 2,500kms myself on mine... So now done over 3,600kms all up.Mostly on road use but has done off road as well. Awesome bike. One thing is if the speedo is playing up, it could be the battery. We got a 42 degree day here and my speedo went wonky ( wouldn't show my speed unless I was sitting at same kms for 30secs or so) then the whole bike died and wouldn't start... replaced battery and now all is well again

    Getting motard wheels for it this week, so looking forward to being able to lean it over on the road
    "I'm not going to vacuum 'til Sears makes one you can ride on"
    -Roseanne Barr-


  12. #27
    Join Date
    16th April 2007 - 20:06
    Bike
    that black thing above the puddle of oil
    Location
    Hawkes Bay
    Posts
    2,450
    Funny about the gearing. I was running 15/41 on standard wheels, and found the engine lugging too much at low revs. The gap between 4th and 5th is just too big. Now running 14/41, but find this a bit low for long road work.

    On road wheels, I have run 15/39 without too many problems.

    Off road, I can't beat the standard 14/48

  13. #28
    Join Date
    2nd March 2004 - 13:00
    Bike
    FransAlp 700
    Location
    Nelson
    Posts
    14,484
    Quote Originally Posted by MOTOXNUT View Post
    There have been no changes at all since the 2003 Model ( other than graphics/colours ) which had an uprated cam chain tensioner and a better quality rear shock with both high and low speed compression adjustments and different seat foam.
    They have seat foam?
    Since when?

  14. #29
    Join Date
    16th April 2007 - 20:06
    Bike
    that black thing above the puddle of oil
    Location
    Hawkes Bay
    Posts
    2,450
    Quote Originally Posted by NordieBoy View Post
    They have seat foam?
    Since when?
    Mine feels like about 5mm of foam wrapped around a 4 by 2 plank of timber. Lucky I've got plenty of padding attached to me.

  15. #30
    Join Date
    12th June 2007 - 21:13
    Bike
    Africa Twin / XRV 750 (RD04L)
    Location
    Kapiti Coast
    Posts
    1,077
    Blog Entries
    6
    I was still scratchin my arse a week after the DB1k, haha
    There are two kinds of adventurers: those who go truly hoping to find adventure and those who go secretly hoping they won't. We should come home from our adventures having faced their perils and uncertainties, endured their discomfort and beaten the odds, with a sly acknowledgment and revitalised solidarity of character.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •