Leaky tank.

[Coyote]

Any advice on the best way to plug a hole in a plastic dirt bike tank (KDX200)? Cheers.

[dino3310]

i carry a tube of nead it when riding for stuff like this but it is only a temperary fix, other options could be plastic weld, or pick up a second hand
tank or if the hole is small enough you could use a self tapping screw with a rubber washer to seal.

[R6_kid:Me]

PVA glue! Worked for me anyway, you may need to use a couple of applications to get a decent thickness, but that stuff dries hard and isnt affected by petrol.

[ElCoyote]

PVA glue! Worked for me anyway, you may need to use a couple of applications to get a decent thickness, but that stuff dries hard and isnt affected by petrol.

The old chewing gum remedy is good if you're stuck in the wops

[Racin Jason]

Fuel tanks are bitch to plastic weld if you dont know what your doing. Obviously you need to have the right kind of plastic, but go to a proper plastic welder with an injection welder if youre gonna pay someone for it. Ive tried with a heat welder and rods, it doesnt work! If its only a small hole you may be able to get it for free..... i always try anyway.