Bucket bits 4 sale

**wbks** · 9th January 2009, 21:32

So care to tell which CDI fits my bike and is it expensive and or hard to install?

**nudemetalz** · 9th January 2009, 23:24

Talk to Sully60. He's the expert on the twins

**Skunk** · 9th January 2009, 23:35

That'll be the CDI and pickup from a CB125Twin. Same as yours but later model I think. It's what I've got on mine. Sully60 has a full-on electronic pickup and stuff.

**Sully60** · 10th January 2009, 00:10

Originally Posted by wbks

Anyone have a 6 volt coil to suit a cb125 twin?

I have some, you're welcome to them but see below

Originally Posted by wbks

So care to tell which CDI fits my bike and is it expensive and or hard to install?

I've already made the following suggestion

Originally Posted by wbks

Going to try and find a 6volt batt and a new 6v coil. Someone said the points wear out faster with the 12v setup. Kinda want something reliable that I can pretty much just get on and ride without replacing shit all the time just for it to run a LITTLE bit better...

Originally Posted by Skunk

Three letters:
CDI.

And the bonus statement:
12 volts

^^^^

To add to my earlier suggestion try getting in touch with the Loncin man. He might have something that works Nudemetalz is one of the few on here who would have his details. I'd envisage spending maybe a couple of hundred dollars but if the engine is in reasonable condition it would be worth it in the long run.

Originally Posted by Nudemetalz the rider of the throbbing spaghetti slurper

Talk to Sully60. He's the expert on the twins

I think there's someone a bit closer to wbks that fits that description better than I.

**wbks** · 10th January 2009, 08:56

Well the CDI sounds good and all but I don't really have a couple hundy to spend right now. Maybe in feb when I'll have to get a job and then I could pay for it. So what about these coils? How much would you want for one?

**Skunk** · 15th January 2009, 11:51

FZR250 frame on TradeMe.

**Pumba** · 17th January 2009, 21:59

Honda MB50 Engine

**gav** · 18th January 2009, 22:06

Originally Posted by Pumba

Honda MB50 Engine

Includes rest of stuff as well does it? 2 sets of rims etc?

**Pumba** · 19th January 2009, 07:19

Wouldnt have a clue, best you ask the guy on the auction

**quallman1234** · 20th January 2009, 16:38

TF125 motor.

http://www.trademe.co.nz/Trade-Me-Mo...-198199315.htm

**koba** · 22nd January 2009, 21:41

Originally Posted by Pumba

Honda MB50 Engine

Could anyone in aucks pick that up and sent it down if I bought it?
Edit: Now I see the rest of the stuff with it, question still stands tho.

**steveyb** · 28th January 2009, 21:20

I have a 1992 Honda NF4 RS125 frame for sale.
No swingarm, just the frame.
Wanting about $250 ono.
Seen plenty of buckets made out of these frames, so you just know you want it!
stevebagshaw@hotmail.co.uk

Later

Steve

**wbks** · 28th January 2009, 21:28

That's cheaper than I was expecting an rs frame to go for. Could be nice for my cb but I'm saving the money to ride an rs with the rest of the HRC parts on it, as you know