Results 1 to 9 of 9

Thread: Another ag (cheaper)

  1. #1
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869

    Another ag (cheaper)

    This one is rougher than the last. Runs on premix at the moment but for a few extra coins can supply the premixer etc etc parts...

    Need to clear the garage out for the new project.

    Looking at about $300 without the premixer parts.

    http://www.kiwibiker.co.nz/forums/at...6&d=1155443466
    Lump lingered last in line for brains,
    And the ones she got were sort of rotten and insane...

  2. #2
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    bump??.....
    Lump lingered last in line for brains,
    And the ones she got were sort of rotten and insane...

  3. #3
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    as above....
    Lump lingered last in line for brains,
    And the ones she got were sort of rotten and insane...

  4. #4
    Join Date
    2nd April 2005 - 11:58
    Bike
    .
    Location
    .
    Posts
    5,095
    $2.50 this week only veeellly veeellly cheep!!
    They shall not grow old as we that are left grow old.
    Age shall not weary them nor the years condemn.
    At the going down of the sun and in the evening,
    we will remember them

  5. #5
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    Quote Originally Posted by Colapop View Post
    $2.50 this week only veeellly veeellly cheep!!
    somehow I think not......

    Will be going on tardme soon
    Lump lingered last in line for brains,
    And the ones she got were sort of rotten and insane...

  6. #6
    Join Date
    19th April 2006 - 14:38
    Bike
    Ducati Monster 821
    Location
    Wellington
    Posts
    882
    Would this be too small to learn to wheelie on?
    You have the right to remain silent. Anything you say will be quoted out of context, then used against you.

  7. #7
    Join Date
    9th February 2005 - 13:27
    Bike
    ...
    Location
    Van Morrison
    Posts
    2,699
    did I mis-read... for $300?

    I dunno what those bikes are worth but thats pretty cheap
    I'm not a complete idiot... some pieces are missing

    Quote Originally Posted by DingDong
    "Hi... I rang about the cats you have for sale..."..... "oh... you have children.... how much for the children?"

    mucho papoosa bueno no panocha

  8. #8
    Join Date
    19th April 2006 - 14:38
    Bike
    Ducati Monster 821
    Location
    Wellington
    Posts
    882
    Yeah, I want a small bike for my partner to learn on and would like to have a go at wheelies so this might be just the thing
    You have the right to remain silent. Anything you say will be quoted out of context, then used against you.

  9. #9
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    Don't know about wheelies.. but from experience smaller bikes are shitloads harder to wheelie than big ones... You could proabably change the gearign and she'll wheelie also there are some engine mods that can be done to improve the torque.

    NOTE: yes this is relativly cheap because it runs on premix but as I said the parts (mixer , oil dispencer side plate etc) can be negotiated for. They are currently on another engine (my rough as guts bike)

    The bike does runa dn when it get a bit clearer i'll go see how she wheelies. Havn't had a chance to give it a good thrash yet so don't know the full potential.

    Would be a good offroader to learn on cause first gear is really short and you can ride around in second from almost idle to about 40-50km/h
    Lump lingered last in line for brains,
    And the ones she got were sort of rotten and insane...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •