Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 53

Thread: Mini motorbike recall (29 Dec 06)

  1. #31
    Join Date
    29th August 2005 - 11:53
    Bike
    1988 GSX400x Impulse Buy
    Location
    4th after the gull on SH1
    Posts
    160
    Quote Originally Posted by NighthawkNZ View Post
    i saw that on the news... cheap chinese crap....

    funny story:

    i bought my 3 year old girl a barbie bicycle for christmas and she was riding it along when the back wheel valve just popped (under the trmendous force of 28psi of air pressure) and i picked it up looked at it and said exactly the same thing "stupid chinese crap" and as i said it a family of chinese people walked past (i didnt see them)

    they all turned, looked at me and looked very offended. the most embarassing thing was that i said it while walking with my mrs her mum and family (who i only just met)

  2. #32
    Quote Originally Posted by davereid View Post
    So, if the gates open ya need rego then ?
    That's where the 'whether public has access by right or not' part comes in I believe.

    If someone can freely drive onto your property its an issue, but if it's fenced and gated its sweet.
    "I'm gonna get to the bottom of this, and I dont give a fuck if you're at the top!!!"

  3. #33
    Join Date
    26th July 2005 - 12:12
    Bike
    Aprilia Shiver 750, Suzuki RG150E
    Location
    Newdlands, Welly...
    Posts
    5,480
    Quote Originally Posted by crshbndct View Post
    funny story:

    i bought my 3 year old girl a barbie bicycle for christmas and she was riding it along when the back wheel valve just popped (under the trmendous force of 28psi of air pressure) and i picked it up looked at it and said exactly the same thing "stupid chinese crap" and as i said it a family of chinese people walked past (i didnt see them)

    they all turned, looked at me and looked very offended. the most embarassing thing was that i said it while walking with my mrs her mum and family (who i only just met)
    ha ha ha that's great !!!


    "...you meet the weirdest people riding a Guzzi !!..."

  4. #34
    Join Date
    29th June 2006 - 22:35
    Bike
    MVs & Ducatis
    Location
    Mainland
    Posts
    1,065
    The Warehouse should have to replace the crap minibikes with better quality ones, then they might think differently in the future.

  5. #35
    Join Date
    28th September 2004 - 15:44
    Bike
    '07 RSVR1000
    Location
    Brisbane
    Posts
    1,113
    When I have kids eventually, I want to get them a little bike. We saw these ones at the warehouse and thought they looked 'cute' but we're going to invest the money in proper bike that won't crap out!

    I feel sorry for the kids who received these bikes 'cause mummy and daddy will now have to fork out for a more expensive version or tell the kid that santa stole their present

  6. #36
    Join Date
    19th September 2006 - 22:02
    Bike
    02 Ducati ST4s
    Location
    Here there everywhere
    Posts
    5,458
    [BEGIN RANT]

    The more cheap shit that we import from china or anywhere else in the world and the more out sourcing of work we do... the less jobs in that field we have here in NZ...

    Classic example is I where I work we import pens (there is no company that makes them in NZ) we also print on them... We are getting more and more people wanting us to do it cheaper which is kinda far enough however more and and more are asking to get them printed in china as well... if we got all the pens printed over in china then I and 5 printers are out of a job...

    There is already a company that is set up in NZ that sends out pens to every company in NZ every so often... what most people don't realise is that this is an irish company, the and the pens are from china (you do the math)

    Im all for imports and exports but to a limit... a certian amout of cheap disposable, a certian amount of medium quality and a certian ammount of top gear...

    If you flood the market with cheap shit and people buy it because its cheap and thats all they have to buy... you have to remember just that its cheap... We get complaints that refills in pens dont last... (a couple of months) well for fark sake 9 times out of 10 its a cheap throw away pen with a 2cent refill

    If you want quality... pay for it.

    WAKE UP NEW ZEALAND... for crying out loud, if you buy cheap you will have to buy again in 6 months time if you buy quality you have pay the extra and the item should last longer. I bought a pair of Nike Airs for $80 and the lasted 8 years, I bought a pair a cheap sneakers from BigRed for $20 about 6 months ago and I need to replace... you do the math

    [/END RANT]

  7. #37
    Join Date
    19th February 2006 - 17:11
    Bike
    My wings a pencil
    Location
    S43° 31.3781', E172° 34.9
    Posts
    1,065
    Quote Originally Posted by NighthawkNZ View Post
    [BEGIN RANT]

    The more cheap shit that we import from china or anywhere else in the world and the more out sourcing of work we do... the less jobs in that field we have here in NZ...

    Classic example is I where I work we import pens (there is no company that makes them in NZ) we also print on them... We are getting more and more people wanting us to do it cheaper which is kinda far enough however more and and more are asking to get them printed in china as well... if we got all the pens printed over in china then I and 5 printers are out of a job...

    There is already a company that is set up in NZ that sends out pens to every company in NZ every so often... what most people don't realise is that this is an irish company, the and the pens are from china (you do the math)

    Im all for imports and exports but to a limit... a certian amout of cheap disposable, a certian amount of medium quality and a certian ammount of top gear...

    If you flood the market with cheap shit and people buy it because its cheap and thats all they have to buy... you have to remember just that its cheap... We get complaints that refills in pens dont last... (a couple of months) well for fark sake 9 times out of 10 its a cheap throw away pen with a 2cent refill

    If you want quality... pay for it.

    WAKE UP NEW ZEALAND... for crying out loud, if you buy cheap you will have to buy again in 6 months time if you buy quality you have pay the extra and the item should last longer. I bought a pair of Nike Airs for $80 and the lasted 8 years, I bought a pair a cheap sneakers from BigRed for $20 about 6 months ago and I need to replace... you do the math

    [/END RANT]

    Free trade with china. WOOHOO.

  8. #38
    Join Date
    31st August 2004 - 11:05
    Bike
    No bike It solded
    Location
    Ngatea.....Near Thames
    Posts
    290
    Quote Originally Posted by pervert View Post

    If it's behind a gate (e.g. your own land) then its not a public road and you can ride and do whatever you want to an extent.
    Actually not ...if you can gain access to the road way beyond a gate by opening the gate its still considered public access , as I understand it the gate needs to be padlocked or a controlled access for it not to be public access.

    Any track ie farm track, track or driveway which is wider than 1.5 metres is considered a road .


    Now who can tell me who they made this legislation for?

  9. #39
    Quote Originally Posted by RT527 View Post
    Actually not ...if you can gain access to the road way beyond a gate by opening the gate its still considered public access , as I understand it the gate needs to be padlocked or a controlled access for it not to be public access.
    Public access and a public road are two different things...
    "I'm gonna get to the bottom of this, and I dont give a fuck if you're at the top!!!"

  10. #40
    Join Date
    12th April 2006 - 18:44
    Bike
    KTM530EXC
    Location
    Whangarei
    Posts
    726
    I saw those cheap bikes in Warehouse and stopped for a second - just a second - then carried on. A second was all I needed to realise they were not good enough for my kid.

  11. #41
    Does anybody know anyone that works for the Warehouse and can confirm what is going to happen to the recalled bikes?

    I'd love to pick up a half dozen or so if they are dirt cheap, fuck they would enhance drunken evenings with a few mates.
    "I'm gonna get to the bottom of this, and I dont give a fuck if you're at the top!!!"

  12. #42
    Join Date
    17th June 2005 - 11:12
    Bike
    a green one, + some others
    Location
    Blenheim
    Posts
    489
    Quote Originally Posted by pervert View Post
    Does anybody know anyone that works for the Warehouse and can confirm what is going to happen to the recalled bikes?

    I'd love to pick up a half dozen or so if they are dirt cheap, fuck they would enhance drunken evenings with a few mates.
    I tried my best to get my hands on the last lot of recalled ones, but my warehouse contact said they would crush them, to prevent anyone from damaging theirselves
    Yes I know my enemies
    They're the teachers who taught me to fight me....

  13. #43
    Join Date
    26th June 2005 - 21:11
    Bike
    Honda NSR300 track hack
    Location
    Pukerua Bay
    Posts
    4,094
    well thats just completly gay.

    NZ needs to harden the f**k up.

    F****n poofters


  14. #44
    Join Date
    13th June 2006 - 09:37
    Bike
    Honda CX500 "Shithawk"
    Location
    Dunedin
    Posts
    1,907
    Quote Originally Posted by lb99 View Post
    but my warehouse contact said they would crush them,
    The crushing will be done at a Metal Recycling yard, and you can bet they'll be hawking those motors off at the back door.
    I worked at one for a short time in Dunedin and that's the sort of thing that happened there.
    It'd be right handy to have a bunch of wee 2-stroke engines around.
    Determined to kill my bike before it kills me

  15. #45
    Quote Originally Posted by Steam View Post
    It'd be right handy to have a bunch of wee 2-stroke engines around.
    For sure, especially considering most of the motors in the Chinese bikes are direct Honda copies because they stole the moulds when Honda tried to outsource the work.

    The bikes might be shoddy, but the motors are usually pretty strong.
    "I'm gonna get to the bottom of this, and I dont give a fuck if you're at the top!!!"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •