Bucket update

**Ivan** · 9th January 2007, 20:55

im free at any stage

**Expert** · 9th January 2007, 21:08

There are some picture of a two hour race we had up here in Auckland on www.gofastfilms.co.nz. If you go on there and look for the two hour bucket and enter your bike number you get a load of photos of you racing around. My number was 44. It's my mate Toby's girlfriend Kirsten's website and the photos are real good.

**Expert** · 9th January 2007, 21:16

See that proves it does actually go!
It was a two man race and I'm the lanky twat riding around like he's just popping down the shop for a pint of milk and a paper!

**Ivan** · 10th January 2007, 22:37

Ok heres a picture of my AX100
Its still not finished of course.
It is a ZZR250 chassis with clipon handle bars Ax100 semi standered engine
With RS125 Ducktail of a 89-90 RS125 Honda RS125

Engine work has had Exhaust port cleaned no modification just casting impuritys removed and Auto Sole polished.
Timing has been retarded
Carb is off a RM80
Expansion chamber at mo is of a RD350 but is getting replaced with a YZ80 chamber

so there you go

**Flyno** · 11th January 2007, 20:23

Nice ride man, you should tho really gt an rs frame! they kick ass

**dangerous** · 11th January 2007, 20:44

Originally Posted by Flyno

Nice ride man, you should tho really gt an rs frame! they kick ass

But in the spirit of bucket racing... no compition parts including GP frames, pistons FXR's etc

**Kickaha** · 11th January 2007, 20:51

Originally Posted by dangerous

But in the spirit of bucket racing... no compition parts including GP frames, pistons FXR's etc

means one of your bikes gets kicked out then

**dangerous** · 11th January 2007, 20:56

Originally Posted by Kickaha

means one of your bikes gets kicked out then

No.. its not a factory GP frame its a 30yr old frame built in a back yard, copied from a then GP bike, but since badley butchered.

Hey Iwas told the other night its twin bro another frame built in Chch is in a garage near by, a old racer owns it maybe a bucket too???

**Ivan** · 11th January 2007, 21:02

Awsome and its not like its going to handle that well considering its 30 years old and a replica its a real bucket frame homebuilt.

What sorta power you making out of it.

I am waiting to hear that my bikes ashitta but still no compliments yet

**gav** · 11th January 2007, 21:12

So Ivan what happened to this? http://www.kiwibiker.co.nz/forums/sh...&postcount=145

**Ivan** · 11th January 2007, 21:16

Well if you look the Fairing is on that bike,
The Right hand side foot hanger rear set went to Flyno
The Wheel of the front is now my motard rim
The Frame is in my spare bucket parts garage
The Rear wheel is going on this frame
So yeah there it is in lots of parts you knowthose grand prix details.

I was very keen to build that but the front end was far to heavy

**gav** · 11th January 2007, 21:37

I would've thought that your current ZZR250 front end would weigh pretty much the same as the FZR400 front end on the RS? Hard to believe that ZZR front end is substantionally lighter?