Suzuki RG150 bits

**McJim** · 13th January 2007, 16:52

If you look here:

http://www.trademe.co.nz/Members/Lis...member=1416825

Front wheel with Rotor and tyre and axle and gubbins to make it fit to your RG150 forks!

Also a black mudguard.

**ZeroIndex** · 13th January 2007, 19:30

nothing I need there... thanks anyway

**McJim** · 14th January 2007, 22:51

Whaddya need? I know a couple of RG150 owners in the area - we are stockpiling bits to save on OEM extortion!

**ZeroIndex** · 14th January 2007, 23:01

probably won't need anything, as my bike is getting repaired through the other person's (that reversed into me) insurance company

**ajturbo** · 16th January 2007, 16:23

we need a left hand front foot peg....

**Coyote** · 16th January 2007, 16:46

I need a right hand footpeg

And I might be interested in that mudgaurd, might have to think about that

What other parts have you got, or are you just willing to sell what's on Trademe? Willing to part with your wiring loom?

**McJim** · 24th January 2007, 12:43

The wheel is all that's left folks. Back up on Retardme coz no one could reach the reserve of $50...$50 for a front wheel is a steal - I'm practically giving it away.

I'm not desperate to sell so if it doesn't go this time it stays in my garage as a spare.

Coyote Alarumba - the only wiring loom I've got is still on the bike.

**prvoke** · 26th January 2007, 10:36

may be a stupid question but any idea if it will fit a kr150?
or what i can measure/find measurements of my wheel to check ? id rather have alloys than spokies

**McJim** · 26th January 2007, 10:46

The overall diameter won't be a problem.

The critical measurments will be:

Distance between fork legs (axle length)
Diameter of brake disk (or compatibility of KR brake disk - can it bolt on)
Distance of brake disk from fork leg.

You may find that a street stock racer may have tried this already.

**ajturbo** · 26th January 2007, 15:40

Originally Posted by prvoke

may be a stupid question but any idea if it will fit a kr150?
or what i can measure/find measurements of my wheel to check ? id rather have alloys than spokies

nothing wrong with the spokies!!!