Bucket bits 4 sale [Archive] - Page 4

motorbyclist

3rd May 2011, 23:35

Yup that would be me.

It got most of the way there (to getting it running right that is), but given I have moved to A-Grade sooner than I would have expected, I need some reliability and I don't have time to dick around with it anymore.

Sad to sell it but at least it taught me a lot.

keen as but no way to get it to auckland - anyone driving this way?

otherwise do you mind holding it for a few weeks? (can pay online as soon as I hit the buy now, just can't pick it up)

ac3_snow

4th May 2011, 07:16

I'm going halfway there (only as far as Taupo) this weekend if thats any help?!

Moooools

4th May 2011, 07:31

keen as but no way to get it to auckland - anyone driving this way?

otherwise do you mind holding it for a few weeks? (can pay online as soon as I hit the buy now, just can't pick it up)

Yep I would be more than happy to hold it for you.
There always seems to be someone heading up that way so should be able to find someway to get it up there.

motorbyclist

4th May 2011, 18:10

Yep I would be more than happy to hold it for you.
There always seems to be someone heading up that way so should be able to find someway to get it up there.

WTF someone BID on it!?

I come home early SOLELY to hit the buy now for $500 and some plonker bids 400 - is he kidding himself?

Moooools

4th May 2011, 18:16

Feel free to get into a bidding war. :yes:

And if you would rather have it shipped up it will only be about $56 depending on where you are.

motorbyclist

4th May 2011, 18:22

for $100 i don't think the risk of missing the motor is worth it... reckon the bidder saw it on KB or on TM first? he bid in the morning and asked about shipping after work

Dutchee

7th May 2011, 08:39

Feel free to get into a bidding war. :yes:

Lol, you got your wish :)

Bet he wishes he hit buy now lol

grantnz

7th May 2011, 09:48

Mikuni carb
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Performance/auction-374105085.htm

speedpro

7th May 2011, 10:54

That's a good carb for something like an MB100 as the downdraught angle is nearly perfect. The little white plastic fitting with the piece of tube on it will need to be blocked and then they tune up like a regular carb.

Ned Kelly

7th May 2011, 12:13

RS125 Aprillia 2006. Rotax 122 Engine
A project bike that we were looking to put together. Too many projects on the go. I cannot see us getting onto this for a long time. Anyone interested it is listed on Trademe. http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-374654655.htm

Kendog

7th May 2011, 15:54

Henk

7th May 2011, 17:42

Looks heavy for a bucket, is it?

I wouldn't be suprised if it isn't. Michelles RS250 feels lighter than an FXR to wheel around the shed.

Bloody tempting but also too many projects and not enough space.

Pumba

7th May 2011, 18:40

cotswold

7th May 2011, 19:58

Looks heavy for a bucket, is it?

Depends which review you read, 2 reckon it's 185kg but that is crap as my Buell was that, 1 said 126kg which must be closer and an American spec reckoned 305lbs, whats an fxr about 118kg? bet it would handle better that the Suzuki tho

Kendog

7th May 2011, 21:50

whats an fxr about 118kg? bet it would handle better that the Suzuki tho
About 118 in road trim, mid to high 90's in bucket trim.

jasonu

8th May 2011, 17:59

About 118 in road trim, mid to high 90's in bucket trim.

Anything more than 72kg with oil and h2o for an F4 bucket is unacceptable!!!!!

Kendog

8th May 2011, 18:12

Anything more than 72kg with oil and h2o for an F4 bucket is unacceptable!!!!!
Lol, you just ruled out around 50% of buckets in nz, if not more.

Kickaha

8th May 2011, 18:15

Lol, you just ruled out around 50% of buckets in nz, if not more.

Doubt it would be as good as 50%,more like 85%+ over 72kg,I'd say of all the bikes in Chch there might be 2 close to that

Henk

8th May 2011, 20:44

AX100 bucket on Trade and exchange for $500. West Auckland.

http://www.te.co.nz/te-motors/Motorbikes/Buy-Sell/Suzuki/adId-8108897.htm

F5 Dave

9th May 2011, 09:19

think he's saying by definition that your heavy coal burners are really just old heifers.

Shorty_925

9th May 2011, 14:53

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-374943536.htm

RMS eng

9th May 2011, 15:43

for sale 1-RGV 250 USD fork in good condition,also comes with other side, parts only,both tubes bent and has fire damage.$75.00 chris 817 9500

gav

9th May 2011, 21:06

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-374943536.htm

This FXR is awesome! Pretty quick too. Note the polished RS125 rims :yes:

Kendog

9th May 2011, 22:54

This FXR is awesome! Pretty quick too. Note the polished RS125 rims :yes:
It does look like a special bike for sure. Easily worth the price me thinks.

Moooools

10th May 2011, 17:28

Does anybody want a complete FXR rolling chassis in Auckland?
Could be one up for sale soon for $150.
Let me know.

Henk

10th May 2011, 17:42

Does anybody want a complete FXR rolling chassis in Auckland?
Could be one up for sale soon for $150.
Let me know.

Yes, me PM me with details please.

koba

11th May 2011, 20:21

Yes, me PM me with details please.

Haha! Someone has a sickness!

Henk

11th May 2011, 20:34

Are you implying that building buckets is some sort of disease, because I'd be inclined to agree.
Unfortunately this got sold to someone else while we were discussing it. Have another FXR roller lined up, but it's in Wellington.
Project FXL100 doesn't seem to be going as smoothly as I'd hoped, every time I think I have a roller lined up it falls to bits on me.
Have got the engine mostly mounted in a bare frame though and the ignition from Newmanz should be at work tommorrow.

koba

11th May 2011, 20:49

Are you implying that building buckets is some sort of disease, because I'd be inclined to agree.

Yes.

As for the other bit, hit the boss up if you need shit done down here.

Henk

11th May 2011, 21:06

Not a sure thing yet.
Pity that the Kaitoke days with karts are a one day affair, long way to drive to do a collection and get half a days racing in.
Michelle was scheming the logistics already.

F5 Dave

11th May 2011, 21:17

What you need is another set of bikes, left in Mal & Hels kitchen & a Jetstar season pass ticket.

And a 2nd Mortgage for the liquor bill.:woohoo:

Dutchee

11th May 2011, 21:21

Not a sure thing yet.
Pity that the Kaitoke days with karts are a one day affair, long way to drive to do a collection and get half a days racing in.
Michelle was scheming the logistics already.
Not sure what the hell planet you're on. You never mentioned I'd actually have to ride my bucket, I thought I was going down to play games hehehe

But I did figure I could drive down (let's remember to drive carefully through Levin, as they have a speed camera there, I think it's on the way down, but it also picks you up if you speed on the way north - doh), get him who must be obeyed if he says the right thing, to fly down, we ride buckets and then drive home.

I got told to behave, as the other option was head down and straight back up via Roys Hill. Go figure, there's always bikes involved in our away trips, but I think it was different when we first got married, but can't ever remember just going away for no reason (apart from the honeymoon, but that doesn't count, I had a lot of reading to catch up on hahaha).

Dutchee

14th May 2011, 21:17

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-376489355.htm CB125 IN Wellington for $800 ono. Would almost be a shame to bucket it :)

Henk

14th May 2011, 21:29

Fook that's tidy.

Clivoris

14th May 2011, 22:03

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-376489355.htm CB125 IN Wellington for $800 ono. Would almost be a shame to bucket it :)

Too pretty by far. Makes me want to find my pudding bowl helmet and oilskin jacket.

Dutchee

14th May 2011, 23:10

Too pretty by far. Makes me want to find my pudding bowl helmet and oilskin jacket.
lol, I thought abou PM'ing you about it, but honestly, I think it would be a shame to bucket it. I just thought putting a post in here might help it find it a loving home.

You can get pudding bowl helmets in black with purple butterflies, but I didn't think that would be suitable for riding my bucket (can you tell I really was tempted hahaha)

Bert

15th May 2011, 13:00

this is begging to become a bucket...
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-375685287.htm

convert back to 100cc and away you go... :yes:

Yow Ling

15th May 2011, 20:05

VT250 rear wheel 17 x 2.5" drum brake, with brake plate and sprocket carrier $50

ac3_snow

17th May 2011, 10:53

tzr frame xl125 motor (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-376970564.htm)

Shorty_925

17th May 2011, 11:09

Project:

http://www.trademe.co.nz/Browse/Listing.aspx?id=375865063

Shorty_925

17th May 2011, 12:35

Used tyre:
http://www.trademe.co.nz/Browse/Listing.aspx?id=375843509

richban

17th May 2011, 22:26

Hi All I have an 06 gsxr rear shock for sale. Goes straight in an RVG250 raises the back by 10mm I think. The 06 had the softest spring so I have been told. Compression and reboud adjustable. $250 ono. PM me if you are Keen.

Also set of FXR wheels with Discs and sprocket carrier sproket rubbers etc. Make me an offer.

Also 3.5" suzuki rear wheel. Too wide for an FXR should fit a RGV ZXR TZR / 250 swing arm. With sprocket and carrier rubbers and useless sprocket.

Cleaning out the shed.

VTRRR

18th May 2011, 07:01

what would be a good re- power for my b120? i have 2 frames, and 1 tired engine. very light. long term project as i have a new bucket also.

richban

18th May 2011, 17:17

Buddha#81

19th May 2011, 12:59

3.5" Rear wheel gone.

Also got a VTR honda front rotor good nick.

whats the Dia of the rotor and mounting?

F5 Dave

19th May 2011, 14:27

what would be a good re- power for my b120? i have 2 frames, and 1 tired engine. very light. long term project as i have a new bucket also.
I think you will find a Suzuki B120 engine should fit that ok.

no really, fitting anything else into a pressed frame would be total ballache & pointless too.

richban

20th May 2011, 07:24

whats the Dia of the rotor and mounting?

Same as this but factory Honda buy the looks. http://www.metalgear.com.au/products_info.php?products_id=1796

RMS eng

20th May 2011, 17:54

RG80 motor and alloy rear set plates for RG50 for sale on trade me for more info ring chris on 817 9500

koba

20th May 2011, 19:27

Same as this but factory Honda buy the looks. http://www.metalgear.com.au/products_info.php?products_id=1796

That MAY fit mine. If someone else doesn't buy it first I'd be keen to compare sometime.

richban

20th May 2011, 20:14

That MAY fit mine. If someone else doesn't buy it first I'd be keen to compare sometime.

All good. I won't get around to ever putting it on trademe. Will bring to next buckets.

Trudes

21st May 2011, 06:46

RG80 motor and alloy rear set plates for RG50 for sale on trade me for more info ring chris on 817 9500

Any chance of a link, I couldn't find them.

Kickaha

21st May 2011, 07:08

Any chance of a link, I couldn't find them.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-377987702.htm

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-377988106.htm

richban

21st May 2011, 18:19

My old front form my bike. 2.5 Honda CBR. Complete with spacers and rotor to suit an FXR.

http://www.trademe.co.nz/Browse/Listing.aspx?id=378194789

fi5hy

22nd May 2011, 08:52

Rich your a bucket spare parts SLUT

richban

22nd May 2011, 09:37

Rich your a bucket spare parts SLUT

Thats what happens when you break the bank buying fancy wheels. Everything thats not nailed down goes on trademe.

ac3_snow

28th May 2011, 21:34

FXR for sale (http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-379110074.htm)
cheap to a good home!

Clivoris

28th May 2011, 21:38

FXR for sale (http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-379110074.htm)
cheap to a good home!

Mate,
I've tried everything apart from putting private detectives on this guy to get a response. No answer to the phone or e-mail.

Dutchee

28th May 2011, 22:11

motorbyclist

29th May 2011, 12:38

FXR for sale (http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-379110074.htm)
cheap to a good home!

what a fucking munter....

don't be surprised if the motor has had zero maintenance since at least 2004... good chance it's been stolen too

Clivoris

29th May 2011, 13:01

FXR for sale (http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-379110074.htm)
cheap to a good home!

DIBS. He just texted me and getting it checked out tomorrow with luck.

Clivoris

29th May 2011, 13:10

Clivoris, he's put photos up now and a comment that his phone is playing up, sso best to email him. Yeah, I know you have.
I've flicked him an email, so if we get his email addy, I'll flick it through to you.
You're going to be at the minefield for the next Wellington bucket meet? I've convinced Henk we need to come watch Mihi for a little bit on the way down :)

Hi mate.
have had some contact now so will see how rough it really is tomorrow. Yep. I at Manfield with Mihi on June 18-19. Would be good to see you both. She's getting some good fundamental skills going but I need to get her her own bucket so her learning will really accelerate. Her sister is mad keen to show her how to be fast too. The sibling rivalry will be hilarious. Slowly filling my garage with bucket bits and am just waiting for them to acrete into something that goes. All I need is time and a bit of luck. The Aprilia is in the market and when that sells we will have some play money.

RMS eng

30th May 2011, 09:43

for sale on trade me RM80 shock 83-85? same inside as my 89 RS steel shock,can be cut down to fit RG50 and other bikes FXR ?ect.shims can be changed for different damping,RMS engineering can machine and rebuild shock s like this,i also have bucket mufflers ect for sale on trade me.

Buddha#81

30th May 2011, 12:37

I'm upgrading my chassis, for sale is my FXR Chassis, GSXR 250 front end and 300mm disc, GSX250 rear wheel conversion, also has solid rear sets (unbreakable tested in real world situations ) will come with tank and belly pan, no fairing or tail piece. front slick is 2/3 worn and has a 1/2 worn rear. $600 ono. The front end and wheels would sell for this alone! I rather not have to send to NI but all offers considered.

jasonu

31st May 2011, 03:03

Bert

31st May 2011, 07:24

Buy my fucking Aprillia RS125 USD tripple clamps or I will kill you!!!
BTW the top clamp has handlebar holders so no need to spend extra cash on clipon clamps.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-380242297.htm

Clamps are in Auckland which is the capital of New Zealand.

Jason, What's the length & Dia of the shaft on the clamps?? was it to long for your RS frame???

jasonu

31st May 2011, 10:29

Jason, What's the length & Dia of the shaft on the clamps?? was it to long for your RS frame???

We were going to use it along with the forks that came with it but found some actual Honda RS125 USD forks so now selling the Aprillia stuff. (forks already sold)

I will email Chris and ask. Better yet, use the link to it on trademe and ask a question there and Chris will respond to it.
Or you can call him 09 817 9500
Cheers.

kel

1st June 2011, 16:20

FXR Megaphone exhaust http://www.trademe.co.nz/Browse/Listing.aspx?id=380241782

jasonu

4th June 2011, 11:46

Buy my fucking Aprillia RS125 USD tripple clamps or I will kill you!!!
BTW the top clamp has handlebar holders so no need to spend extra cash on clipon clamps.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-380242297.htm

Clamps are in Auckland which is the capital of New Zealand.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-379249344.htm
$200 for the forks and $100 for the clamps equals $300 for a shit hot front end.

Dutchee

6th June 2011, 14:20

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-382064187.htm $1500 FXR in Wellington (not Kaitaia)

Kendog

6th June 2011, 14:25

A large number of GP125 slicks
http://www.trademe.co.nz/Browse/Listing.aspx?id=381254273

CM2005

6th June 2011, 14:48

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-382064187.htm $1500 FXR in Wellington (not Kaitaia)

Its mine chaps, so PM me if you like - im out of the area from the 18th though, back 1st July.

Shorty_925

9th June 2011, 22:20

CBR150's x 3 : http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-383160531.htm

jaffaonajappa

9th June 2011, 22:51

CBR150's x 3 : http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-383160531.htm

Beware - bidding price is for 1ea only.......seems pretty expensive?

kel

10th June 2011, 08:59

Beware - bidding price is for 1ea only.......seems pretty expensive?

:killingme

jasonu

10th June 2011, 16:01

Beware - bidding price is for 1ea only.......seems pretty expensive?

Plus the guy sounds like a crunt with his wish wash description and smartarse answers. Buyer beware definitely in this case.

gatch

10th June 2011, 22:34

Plus the guy sounds like a crunt with his wish wash description and smartarse answers. Buyer beware definitely in this case.

The race ignitions and shocks are definitely illegal for 150ss racing. "Just put the original parts back on.." For 3k ? Eat my ass..

Legal as for buckets though.

koba

10th June 2011, 23:52

The race ignitions and shocks are definitely illegal for 150ss racing. "Just put the original parts back on.." For 3k ? Eat my ass..

Legal as for buckets though.

I would also point out that someone unscrupulously advertising a bike in such a manner also lays doubt in my mind of its engines total swept volume. I wouldn't want to pay 3 grand to find out.
It really saddened and annoyed me when I saw a bike that I think may be one of these blatantly cheating at a national event.
If the correct process was followed it would have even been possible, and reasonable, to make such a bike legal.
Cheating Sucks.

Kendog

11th June 2011, 00:02

I would also point out that someone unscrupulously advertising a bike in such a manner also lays doubt in my mind of its engines total swept volume. I wouldn't want to pay 3 grand to find out.
It really saddened and annoyed me when I saw a bike that I think may be one of these blatantly cheating at a national event.
If the correct process was followed it would have even been possible, and reasonable, to make such a bike legal.
Cheating Sucks.
His description is misleading for SS, and he comes off as a bit of an arse.

all4A50s

11th June 2011, 07:27

gatch

11th June 2011, 14:44

I've seen the bikes, brought parts off him and met the seller, Andrew. He's friendly guy who's willing to help you out with parts at much lower rate that retail.

The Repsol bike was raced at TRRS last year in street stock and he was flying, won as well I think.

To my knowledge the engine are putting out 23.5 hp and the suspension was set up by Kerry Dukie.

They are good bikes.

Actually I just read the auction properly and he would supply the stock parts as well. But I am picking these have been raced as they are.. Illegal..

BUT I was off the mark when I commented on the bikes being illegal for buckets.

F5 Dave

11th June 2011, 20:57

. . . and the suspension was set up by Kerry Dukie.
. . .
Anything to do with that turkey:tugger:

koba

11th June 2011, 22:59

Anything to do with that turkey:tugger:

Shit man, he is awesome! he was telling us a while ago how he has a Gilera 180 scooter bored out to 225 that would be the first bike to turn one in a superbike race. It would post better times than the 1.20 he managed on it but the front forks bend right back all the time.

F5 Dave

11th June 2011, 23:27

Sorry yea yer right. I'm just jealous. :killingme

Kendog

12th June 2011, 10:22

Str8 Jacket

12th June 2011, 19:28

He has re-listed at least one with similar descriptions....

jaffaonajappa

12th June 2011, 19:34

Str8 Jacket

13th June 2011, 06:43

Beleive it was withdrawn as it was misleading the quantity available for bid price. He never actually mentioned bidding was for just one bike - despite the auction comments referring to two near identical bikes.

And he has re-worded the entire advert too! At least now some poor newb won't be suckered in to buying something "illegal".

Kendog

13th June 2011, 12:09

And he has re-worded the entire advert too! At least now some poor newb won't be suckered in to buying something "illegal".
If that is the auction for the bike with the mirrors on it, it was already there when he had the other auction running.
He has Three CBR's for sale but only had Two adds. Two of the CBR's are set up to race one is not. He answered a question in the non race set up add for one of the race add questions. The race set up bikes talk about SS racing, but have illegal parts.
Confusing? hell yes. But when people asked questions he got all defensive and started quoting the MNZ rule book.

Str8 Jacket

13th June 2011, 12:12

If that is the auction for the bike with the mirrors on it, it was already there when he had the other auction running.
He has Three CBR's for sale but only had Two adds. Two of the CBR's are set up to race one is not. He answered a question in the non race set up add for one of the race add questions. The race set up bikes talk about SS racing, but have illegal parts.
Confusing? hell yes. But when people asked questions he got all defensive and started quoting the MNZ rule book.

hehe, my Trademe user name is Hell-on-Wheels..... ;)

speights_bud

13th June 2011, 18:50

The Repsol bike was raced at TRRS last year in street stock and he was flying, won as well I think.

Yes it was there and yes it went quick. as far as my knowledge goes he would have been sweet to run it as a bucket but chose/insisted to run in streetstock.

which in due course was referred to the appropriate authorities at the track on the day and a protest was lodged in regards to suspension and exhaust noise level, as these were the two most obvious illegal parts that could be investigated on the day without a mechanical strip-down.

Some people are fed up with cheaters entering into a street-stock class as the name suggests and stealing trophies away from the young fellas who trying to get into racing.

koba

13th June 2011, 21:59

which in due course was referred to the appropriate authorities at the track on the day and a protest was lodged in regards to suspension and exhaust noise level, as these were the two most obvious illegal parts that could be investigated on the day without a mechanical strip-down.

Some people are fed up with cheaters entering into a street-stock class as the name suggests and stealing trophies away from the young fellas who trying to get into racing.

What ever happend with that?

I notice It still had the flash rear shock when it was racing at the Nats in Streetstock but it did seem to have quietened down a bit.

speights_bud

13th June 2011, 22:30

What ever happend with that?

I notice It still had the flash rear shock when it was racing at the Nats in Streetstock but it did seem to have quietened down a bit.

i believe the limp wristed mnz man at the top of the heirachy that day gave him a slap with the wet bus ticket. I think he was told to remove the two above mentioned items.
It felt like a waste of time given the amount of support from the racers, club officials and club members who were involved with the protest, they did their part by the book by sticking to the class rules.

The owner and rider of the bike had the cheek to sit there and say "if you protest us i have enough money and i will protest every other streetstock bike out there" the rider also admitted they had just fitted aftermarket Cams infront of the officials at the meeting...

frankly don't give a sh*t how much money you have, go race in a different Class instead of pinching trophies off beginners

(or admit you have a bucket eligible bike and enter it in the appropriate class)

Kendog

14th June 2011, 06:44

i believe the limp wristed mnz man at the top of the heirachy that day gave him a slap with the wet bus ticket. I think he was told to remove the two above mentioned items.
It felt like a waste of time given the amount of support from the racers, club officials and club members who were involved with the protest, they did their part by the book by sticking to the class rules.

The owner and rider of the bike had the cheek to sit there and say "if you protest us i have enough money and i will protest every other streetstock bike out there" the rider also admitted they had just fitted aftermarket Cams infront of the officials at the meeting...

frankly don't give a sh*t how much money you have, go race in a different Class instead of pinching trophies off beginners

(or admit you have a bucket eligible bike and enter it in the appropriate class)
At least trade me did the right thing and removed his auction.
The guy sounds like a complete wanker.

andrew a

14th June 2011, 09:49

The Repsol bike was raced at TRRS last year in street stock and he was flying, won as well I think.

He started with the street stocks 20seconds ahead of the buckets. I did get past him on my FXR. He was on wets also. Thats an advantage over other street stocks.
He should have raced in the bucket class and lots of other buckets would have passed him. Its not a street stock if its not stock. Anyway back to buckets.

motorbyclist

15th June 2011, 19:47

At least trade me did the right thing and removed his auction.
The guy sounds like a complete wanker.

they probably only removed it because it was one auction for multiple bikes and that reason only

I always laugh at chequebook racers who just have to say race cam, race shock, race sparkplug etc

ajturbo

15th June 2011, 20:30

mmmmmmmm race cam... just what i need for the RG50... that'll fuck em:girlfight:

gav

16th June 2011, 19:29

Well, a couple of things, when they raced at Levels in the Nationals, in the results/timing charts they were listed under another class Junior 150 or something similiar. Also I guess as the 150SS class isnt a National championship class they arent to concerned. But yeah, the guy is an ass thats for sure.
He gets well fired up when you call his bikes buckets ... :killingme
Anyone got the link for his auctions?

Kendog

17th June 2011, 06:55

jasonu

17th June 2011, 11:43

This is the only one he has on at the moment, hasn't delisted the two street stock buckets
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-383161390.htm

Bombard him with silly questions does it have reverse? will it run on diesel? will you trade it for my set of pots and pans? etc

Yow Ling

17th June 2011, 15:44

Bombard him with silly questions does it have reverse? will it run on diesel? will you trade it for my set of pots and pans? etc

I think you guys are acting like cocks, if you want a fast bucket buy it, its way cheaper that jason U wanted for his 20 year old bucket engine in a bodged frame remember $5000.? It is a diesel, he may swap it for 3 or 4 lbs of pot who knows, maybe he thinks these questions are serious.

It appears this guy knows more about SS150 diesel rules than most here.

Kendog

17th June 2011, 16:20

It appears this guy knows more about SS150 diesel rules than most here.
That is the point, he was saying they were SS bikes in his auction description. Then he got all pissy quoting the rules when people asked the question. Sounds like he did the same thing while racing them.
They may be great as buckets, but he needs to be honest when talking about SS.

F5 Dave

17th June 2011, 17:23

I think you guys are acting like cocks, if you want a fast bucket buy it, its way cheaper that jason U wanted for his 20 year old bucket engine in a bodged frame remember $5000.? It is a diesel, he may swap it for 3 or 4 lbs of pot who knows, maybe he thinks these questions are serious.

It appears this guy knows more about SS150 diesel rules than most here.
I always act like a cock, how do I get in on the action?

& Jason was having a laugh with that 5k bit. Having said that I know his bike & the engineering on it was well thought out (well possibly engine position needed a tweak) & the bike when running properly (the first time I rode it) would have slaughtered anything else I've ridden. It was faster than Joe1.

gav

17th June 2011, 19:58

Supposedly he will be running Yamaha R125's next rear complete with the Malossi race kits. This includes a 180cc big bore kit! Wonder what class he is going to run them in?

jasonu

18th June 2011, 14:04

I think you guys are acting like cocks, if you want a fast bucket buy it, its way cheaper that jason U wanted for his 20 year old bucket engine in a bodged frame remember $5000.? It is a diesel, he may swap it for 3 or 4 lbs of pot who knows, maybe he thinks these questions are serious.

It appears this guy knows more about SS150 diesel rules than most here.

No one was acting like a cock except the seller of the CBR's. He got very defensive and evasive when questions were asked.
BTW, the TZR was not 'bodged' in any way. In its day it was amongst, if not the best 100 in the country (see F5Daves reply). It won a lot of races on small tracks and big and dam near won the last (I think) Ohakea GP 2nd to Morely Sherriffs and in front of Jimmy and Pete Steadman. IMO it helped lead the way from the old style Buckets to the next generation of GP framed machines.
Next time maybe you should pick a subject to that you know something about to comment on.

Kickaha

18th June 2011, 14:14

IMO it helped lead the way from the old style Buckets to the next generation of GP framed machines.

Fuck all GP framed machines about if you look at the total number of buckets, the introduction of the FXR would have had far more influence in getting away from "old style" Buckets

jasonu

18th June 2011, 14:39

Fuck all GP framed machines about if you look at the total number of buckets, the introduction of the FXR would have had far more influence in getting away from "old style" Buckets

What??? A Suzuki FXR motor in a Suzuki FXR frame. FXR's have influenced nothing.
However, FXR's and the rule changes allowing 150 4 strokes have had a huge hand in bringing bucket entry and interest levels to what we see today.

Kickaha

18th June 2011, 14:52

What??? A Suzuki FXR motor in a Suzuki FXR frame. FXR's have influenced nothing.

You're contradicting yourself, first you say they've influenced nothing then you make the following statement

However, FXR's and the rule changes allowing 150 4 strokes have had a huge hand in bringing bucket entry and interest levels to what we see today.

The FXR 150 has had more to do with getting away from "old school" buckets than anything else in the last decade, it made the class far more accessible to a wider range of mechanical numpties who just want to turn up and ride and the standard of presentation has also improved considerably

To say they've influenced nothing is ignorant in the extreme

The "next generation" of GP Framed machines (of which there is fuck all) haven't had 1/2 the impact on the Bucket racing scene that the introduction of the FXR has

jasonu

18th June 2011, 15:15

You're contradicting yourself, first you say they've influenced nothing then you make the following statement

The FXR 150 has had more to do with getting away from "old school" buckets than anything else in the last decade, it made the class far more accessible to a wider range of mechanical numpties who just want to turn up and ride and the standard of presentation has also improved considerably

To say they've influenced nothing is ignorant in the extreme

The "next generation" of GP Framed machines (of which there is fuck all) haven't had 1/2 the impact on the Bucket racing scene that the introduction of the FXR has

You are right. In the last decade FXR's have made it easy(er) to get into buckets with a nice motor, frame, wheels brakes and suspension straight out of the box and that is great. It probably saved the class but I don't see them progressing to anything new.
I am talking about another 10 or so years before that, the early 90's when old shit could still win a race or 2.
I'm done.

gav

18th June 2011, 15:46

GP framed bikes as mentioned have always been in the minority,and probably will remain so. Hell, even your bike isnt GP framed either is it? Plenty of bikes ended up with different frames over the earlier years, including home built frames etc.
The truth is the FXR provided a very competitive ride even as a standard bike. The next era will see these too finding new frames to improve things. Something like a TZR250 framed FXR with an RS125 Showa shock, hot engine etc, oh wait, thats Yow Lings bike, but hang on, apparently he doesnt know anything .... :killingme
Just as well you are done now Jasonu, you're starting to embarrass yourself. :lol:

Moooools

18th June 2011, 16:45

Or a hot FXR engine in a TZR 250 frame with ZXR 250 forks and RS 125 wheels. Oh wait thats my bike.:drool:

But you are right Jason. FXRs contribute nothing to development.:scratch:

ac3_snow

18th June 2011, 18:57

:corn:
So anyone have some shit for sale?

TF125 in the south island, (http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-385354500.htm) sounds like it needs a rebuild $50

all4A50s

18th June 2011, 19:06

But you are right Jason. FXRs contribute nothing to development.:scratch:

I wouldn't say that's strictly true.

I'd lean more towards the FXR has given a base level competitive bike that has leveled the playing field to a great degree (for those inclined) and that has led to further development of small 4-strokes. Richard's bike is a good example of this.

And so what if people want use their cheque book for building up a bike. Their buzz, their money, their right. As long as they are having fun.

Moooools

18th June 2011, 20:01

I wouldn't say that's strictly true.

I'd lean more towards the FXR has given a base level competitive bike that has leveled the playing field to a great degree (for those inclined) and that has led to further development of small 4-strokes. Richard's bike is a good example of this.

And so what if people want use their cheque book for building up a bike. Their buzz, their money, their right. As long as they are having fun.

I can't quite make heads or tails of this. But the statement that you quoted was sarcasm. Just for the record.

Can't really tell if you recognised that or not.:confused:

But yeah stuff for sale aye? Ummmmmmmmmm.
I searched bucket and got this (Would be good for someone who doesn't have a vary big car.):

http://www.trademe.co.nz/Sports/Camping-outdoors/Cooking-food/Pots-dishes-utensils/auction-383943143.htm

richban

18th June 2011, 20:51

I have some standard FXR wheels for sale. They have rotors and sprocket carrier with, even a sprocket. Also an 06 GSXR600 rear shock. The shock has a yellow spring even! and also a red anodized bit at the top, very exciting to look at. The wheels look like they would make any bucket 5 seconds a lap faster as they are silver. Maybe 10 seconds on a big track as they will build up more speed. They even come with some amazing tires. They are some sort of special hard compound. The rear is ace metric as it is hard on one side and sort of oily slippery on the other. Much the same as a motogp tire. If you wanted to maybe drop your lap times further and become the envy of all other racers. I could paint the wheels red on request. For a small fee of course.

PM me if you are keen on any of that super rad stuff.

Yow Ling

19th June 2011, 09:34

No one was acting like a cock except the seller of the CBR's. He got very defensive and evasive when questions were asked.
BTW, the TZR was not 'bodged' in any way. In its day it was amongst, if not the best 100 in the country (see F5Daves reply). It won a lot of races on small tracks and big and dam near won the last (I think) Ohakea GP 2nd to Morely Sherriffs and in front of Jimmy and Pete Steadman. IMO it helped lead the way from the old style Buckets to the next generation of GP framed machines.
Next time maybe you should pick a subject to that you know something about to comment on.

Settle down, I was just messing with you , cos you called my 100 motor Gash. Seems you have pretty thin skin, glasshouses and rocks?. I havnt even seen your bike, so how could I possibly be qualified to comment

jasonu

19th June 2011, 10:19

Settle down, I was just messing with you , cos you called my 100 motor Gash. Seems you have pretty thin skin, glasshouses and rocks?. I havnt even seen your bike, so how could I possibly be qualified to comment

Yeah sorry about that and it seams I did piss on myself a bit.
Now on to the next KB squabble.

TZ350

19th June 2011, 10:31

241038

Trademe FXR150 Engine http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-385458341.htm

gav

19th June 2011, 10:38

241038

Trademe FXR150 Engine http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-385458341.htm

Interesting pipe on it ...

and the rest of the bike is pretty cheap http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-385459752.htm

TZ350

19th June 2011, 10:51

I see its a Buyer-Must-Pick-Up, type of auction, I will collect it and arrange shipping (at cost) if any of the out of town boys wan't to bid, PM me after the auction.

Kickaha

19th June 2011, 12:56

Interesting pipe on it ...

It looks like a DR header pipe

TZ350

19th June 2011, 17:34

241100

Trademe MB100 http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-385539950.htm

Moooools

19th June 2011, 20:42

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-385514633.htm

:drool:

Somebody try it!

jaffaonajappa

19th June 2011, 21:10

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-385514633.htm

:drool:

Somebody try it!

Farkkkk. 7k for second hand forks?
Will they fit my AX100?

speights_bud

20th June 2011, 17:28

This is the only one he has on at the moment, hasn't relisted the two street stock buckets
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-383161390.htm

Don't want to flog A dead horse now but does the following rule mean the bike is ineligable for ss? he says ss is all good in the response to a question on the auction....

22.12.3 Streetstock is open to any street type road registerable mass production
machine up to 150cc of any make available or sold or on sale in New Zealand,

(apparently its not road registerable)

jaffaonajappa

20th June 2011, 17:52

speights_bud

20th June 2011, 17:55

gav

20th June 2011, 18:46

the other two in the condition they were presented in definitely not.

In regards to this 3rd 'stock' bike he's listed. I'm just wandering given that he's imported the bike does this mean that it cannot be entered in ss because its not registerable for some reason?
You are actually allowed to do quite a bit to a four stroke to compete in 150SS if you check the rules. Might've only been a couple of things that would be in dispute.
CBR150's are fine to race, I dont think each individual bike has to be registerable to compete, just the model concerned.

speights_bud

20th June 2011, 19:12

You are actually allowed to do quite a bit to a four stroke to compete in 150SS if you check the rules. Might've only been a couple of things that would be in dispute.
CBR150's are fine to race, I dont think each individual bike has to be registerable to compete, just the model concerned.

Yea I've read all about the allowed mods etc, i was there with the protested bike so yep, yadda yadda....

i think you've answered my Q about the individual bike needing to be register-able and thinking again it doesn't make sense.. otherwise all write off bikes couldn't be used as race bikes...

motorbyclist

21st June 2011, 19:42

Don't want to flog A dead horse now but does the following rule mean the bike is ineligable for ss? he says ss is all good in the response to a question on the auction....

22.12.3 Streetstock is open to any street type road registerable mass production
machine up to 150cc of any make available or sold or on sale in New Zealand,

(apparently its not road registerable)

I think the wording would imply you can't use a bike you couldn't register in NZ. The intention would be to prevent people entering race bikes or purpose built machines as is done in buckets - the bikes must have been roadworthy when original trim, and still stock bar a few exempt parts - ie a "street" bike in "stock" condition.

Just because LTSA makes it very difficult to register a bike (or car) in NZ if you're one of the first to try, doesn't mean we should ban a bike that would otherwise pass a cert and WOF.

The two other racebikes he was selling were faaar from stock condition, and undoubtedly illegal on most aspects of their modification (judging by the auction description and my crude understanding of the rules - I'm not even sure if it's legal for buckets, either!)

Yow Ling

21st June 2011, 19:54

The two other racebikes he was selling were faaar from stock condition, and undoubtedly illegal on most aspects of their modification (judging by the auction description and my crude understanding of the rules - I'm not even sure if it's legal for buckets, either!)

FFS the only non complying parts on thes so called illegal bikes are the shock and the ignition, which he agreed to supply the stock parts if required, go find some other witches to burn. these bikes are legal for buckets, this is the bucket forum

gav

21st June 2011, 21:06

4 strokes some modifications are permitted “Original
camshaft may be ground, proprietary carburetor kit may be fitted” and exhaust
pipe upgrade (95dBA)
This class will exist for production-based machines to be raced in a competitive
environment, with some freedom for machine set up but within the confines
of rules to suit the New Zealand market conditions.

2 strokes in Streetstock are to run stock standard, 4 strokes as above are allowed some modifications. While maybe not being 100% legal, probably the majority of the 2 strokes arent either. But then again its not a National Championship ....

Yow Ling

24th June 2011, 21:03

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-386897747.htm

forks usually easy to straighten

maggot

24th June 2011, 21:15

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-386897747.htm

forks usually easy to straighten

That's my old girl!
She was a decent runner, valves needed a little adjustment probably, but other than that, she's sweet.
Had a pair of decent Conti's on there as well.
Needa try to get the pics off that guy, momentos!

Arronduke

25th June 2011, 20:57

If a few people want bits it might be worth buying and splitting up...
I would be keen for an engine ... OH I all ready have a spare..

brought an FXR for about this amount sold the bits and got a free engine.

If it goes for this is a steal...

F5 Dave

26th June 2011, 18:21

241100

Trademe MB100 http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-385539950.htm
A good MB barrel & head cw piston FFS & some muppet gets it for a 100 notes only bid? I would have thought there would have been some bids on this, they are hard to find.

btw thanks Rob.:banana:

koba

26th June 2011, 18:42

A good MB barrel & head cw piston FFS & some muppet gets it for a 100 notes only bid? I would have thought there would have been some bids on this, they are hard to find.

btw thanks Rob.:banana:

I'm always too slow on the trademe thing.

Yow Ling

26th June 2011, 20:22

Heres a whole motor for 150 http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-386373175.htm

racefactory

26th June 2011, 22:27

Got a Gl145 wheel and brake disc here.

gav

27th June 2011, 22:31

Not sure if this has been posted yet GN125 motor http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-385990053.htm

motorbyclist

27th June 2011, 22:35

Not sure if this has been posted yet GN125 motor http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-385990053.htm

you'd be brave trying to race with one of those!

gav

27th June 2011, 22:50

you'd be brave trying to race with one of those!
There's a quick one down here, once he gets it out of the shed that is, aye Kickaha :yes:
Still got potential too.

koba

28th June 2011, 06:40

you'd be brave trying to race with one of those!

Why is that?

F5 Dave

28th June 2011, 09:28

'cause of all the awesome grunt & the in the wind attitude:angry: righteous bro

jaffaonajappa

28th June 2011, 09:48

$800 - $1,100 GL145. Seems like an ok price....
But still. Theres heaps of unused bucket bikes sitting in garages which would be cheaper, grrrr.
http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-386592679.htm

Kickaha

28th June 2011, 11:36

you'd be brave trying to race with one of those!

You must have only started racing in the FXR era

There's a quick one down here, once he gets it out of the shed that is, aye Kickaha :yes:
Still got potential too.

Well I did have a plan but then something happened to fuck that up

tim.napier

29th June 2011, 18:10

Looking for side plastics for a 1992 Xr200 if anyone has any laying around.

Cheers.

TZ350

30th June 2011, 08:10

Some MOTA 2-Stroke engine development software on Trademe ................... http://www.trademe.co.nz/Browse/Listing.aspx?id=387576544

241809

jasonu

4th July 2011, 04:11

2004 GSXR1000 front brake disk 300mm dia (same dia as an RS125 disk)
Not bent, ready to use.
$50 plus any freight cost.
Call Chris 09 817 9500

F5 Dave

7th July 2011, 16:39

Wow these look super sexy & would suit a GSXR1000

http://www.trademe.co.nz/Browse/Listing.aspx?id=390150119

buy them you wankas I could use the money.

The Pastor

7th July 2011, 17:07

I have a complete gl145 suitable for buckets for sale. best offer wins.

sidwyz

7th July 2011, 17:45

Is this the same one that needed a piston a while back?

Clivoris

7th July 2011, 19:46

I have a complete gl145 suitable for buckets for sale. best offer wins.

Tell me more Kimosabi.

The Pastor

7th July 2011, 21:24

Tell me more Kimosabi.

its all there, was a road commuter but lent it to a muppet on here who crashed it and smashed the headlight.

seems pretty straight. engine is good. I paid $500 for it with wof and reg. easy to put back on the road, but buckets are way more fun.

wheelies like a boss.

TZ350

15th July 2011, 19:59

On page 200 there is a simpler 23 rwhp setup using a RG250 chamber modified to RM125 specs. And on this page, the basic details for 27rwhp from a 1978 Suzuki GP125 Engine and RS125 Expansion Chamber.

Trademe http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-391580898.htm

242941

Good hp can easily be pulled from one of these. A bit of work and someone could have a fast ride for the next BOB.

Pumba

16th July 2011, 09:57

One of the Lancaster CB is up for sale. A solid CB125t, that has had a fair bit of assistance from John Conner to set up

http://www.trademe.co.nz/Browse/Listing.aspx?id=391292545

Its a shame, I have some hard but fair races against Daniel

TZ350

16th July 2011, 15:28

F5 Dave

16th July 2011, 20:41

Proper size wheels, slicks. Is it because people are turning ghey these days?

F5 Dave

22nd July 2011, 22:25

Wow lookit. not a bad price for a rear if yer running spokes.

http://www.torpedo7.co.nz/products/T7RIRN0S1/title/torpedo7-sm-rim-3-50x17--7116-

might have to paint your front rim black, but so be it.

Shorty_925

5th August 2011, 15:02

RG50 anyone?

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-397332901.htm

kel

5th August 2011, 15:27

he wants to much! Theres some good F4 bikes available for the same coin.

F5 Dave

5th August 2011, 16:52

Well, for a road legal bike that isn't bad esp considering the cheaper rego of a moped, if indeed it is still cheaper these days. I had one for commuting for a few years & it was a hoot. Even rode it to the cold kiwi, - about 4 times!

Shorty_925

8th August 2011, 19:53

Another 50 for ya :http://rmdmotors.com/new-1996-honda-ns50r/

They do have some other cool GP bikes up for sale.

Rick 52

8th August 2011, 22:22

Another 50 for ya :http://rmdmotors.com/new-1996-honda-ns50r/

They do have some other cool GP bikes up for sale.

Your not wrong !! amazing bikes I need to do lotto....

ellipsis

8th August 2011, 22:37

Another 50 for ya :http://rmdmotors.com/new-1996-honda-ns50r/

They do have some other cool GP bikes up for sale.

...what would a fully faired thing like that be worth here....pre-loved...any idea?...

F5 Dave

9th August 2011, 09:34

We have an NS50 racing in wgtn & a mate has another or two.

jasonu

9th August 2011, 15:56

...what would a fully faired thing like that be worth here....pre-loved...any idea?...

nothing nada nout!!!

ellipsis

9th August 2011, 17:29

nothing nada nout!!!

...does that mean I should give it away then...huh..

Dutchee

9th August 2011, 20:14

...does that mean I should give it away then...huh..

Yip. I'll be generous and pay for the freight up to Auckland. Want me to PM you our address?

Clivoris

9th August 2011, 20:49

Yip. I'll be generous and pay for the freight up to Auckland. Want me to PM you our address?

I will hitch-hike down then ride it back for you ow.

Henk

9th August 2011, 20:52

Looks like woody_racers bike is on the market again. The no muffler looks as antisocial as ever.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-397898779.htm

F5 Dave

10th August 2011, 09:06

All set up & ready to go, except at a track. What a tithead.

Str8 Jacket

10th August 2011, 09:13

All set up & ready to go, except at a track. What a tithead.

Careful, you'll make him cry!

ac3_snow

14th August 2011, 22:26

possibly not practical, but cool.

Yamaha YSR80 (http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-399492953.htm)

Buckets4Me

15th August 2011, 19:27

mb100 parts

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-399065428.htm

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/pistons-rings/auction-399065405.htm

Pumba

15th August 2011, 19:30

possibly not practical, but cool.

Yamaha YSR80 (http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-399492953.htm)

Same as Scotts which he was racing at Mt Welly before he got the FXR. The go quite well. You just need to know how to fold into one

Shorty_925

24th August 2011, 08:22

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-401981818.htm

Henk

28th August 2011, 19:26

Replacing the fridge tommorrow, if anyone wants the old one let me know, otherwise I'll take it to the tip next weekend.

gav

29th August 2011, 22:53

Going pretty cheap ..

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-402984606.htm

Rick 52

30th August 2011, 18:39

Going pretty cheap ..

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-402984606.htm

Bargin ! This is my old bike and a 08 gp winner ,2nd in the 2hr ,Mt wellington cup 08,3rd Auckland champs 3rd NI points ...Great bike still not sure I should have sold it
17 bhp at the wheel .

Yow Ling

30th August 2011, 21:25

I have 3 ts/tf 100 cc barrels and 1 tf125 couple of heads and a set of cases.
one has a stock carb.
Offers?

Henk

30th August 2011, 21:59

I have 3 ts/tf 100 cc barrels and 1 tf125 couple of heads and a set of cases.
one has a stock carb.
Offers?

try pming ac3_snow he sort of blew one up a couple of weeks ago and might be keen.

ac3_snow

2nd September 2011, 00:08

GN250 carb (http://www.trademe.co.nz/Browse/Listing.aspx?id=403342334) plus in Wellington

jasonu

3rd September 2011, 16:37

Is anyone interested in a pair of used, in really nice condition RS125 NF4 (pre 1995) footpeg brackets as pictures and 3 new HRC cast ali RS125 NF4 footpegs?
The lot for $100USD (about $120Kiwi) shipped to your door which will take about a week to 10 days from recieving payment.

I also have a 2004 GSXR front disk diameter 300mm no offset. $50Kiwi plus freight from Titirangi or you can collect it yourself.

Payment is thru paypal, bank transfer or cash on pickup.

PM thru KB or email jasonulyatt.1@msn.com

nudemetalz

7th September 2011, 10:14

My Spool one piece race leathers are up for sale.
I bought these solely for bucket-racing hence advertised here,...

Decided def not getting back into racing unfort, due to (new) family commitments and also my condition.

Not too bad condition, of course as some of you know, I crashed a few times on my old bucket..

Double zipped (important for ease of taking off and getting on), hump at the back and armour where it counts. Comes with knee sliders too
Blue, white & black.

Size Large

Note - the pics are from before I raced in them. They have a few extra small slide marks on them but nothing too major.

PM me if you're interested as I'm selling these cheap !!!!!!!

Adrian will take them out to the next Kaitoke meeting if not sold before then.
I will also have them for sale on TM...but would rather they went to a fellow bucket racer.

nudemetalz

11th September 2011, 00:27

my spool one piece race leathers are up for sale.
Blah blah

now sold :)

Moooools

11th September 2011, 08:48

Anybody want a CBR250 MC19 frame, shock and swing arm?
Free to a good home.

F5 Dave

12th September 2011, 10:40

I guess this front GSXR wheel would make a good bucket rear as it's 3.5" & fairly light

http://www.trademe.co.nz/Browse/Listing.aspx?id=405610875

ok ok its mine - I was going to make a RS style rubber donut cush drive, but plenty of people are running them straight mount. Some new wheels are on the bike so I won't get around to this.

nudemetalz

12th September 2011, 13:36

I used to use an FZR400 front rim on the rear of my bucket with straight mounting of the sprocket. No problems there. Mind you, I didn't do a lot of burnouts or wheelies on it...err..okay once or twice...

hillbillie

13th September 2011, 16:18

Anybody want a CBR250 MC19 frame, shock and swing arm?
Free to a good home.

If you still got it, I'll take her....... please :eek:

Moooools

13th September 2011, 16:22

Unfortunately Clive will be stealing it from under your nose tonight.

Gigglebutton

13th September 2011, 16:42

http://www.ebay.com.au/itm/HONDA-RS125-NF4-FRAME-1987-1994-RS-125-HRC-RACING-/320757854845?pt=AU_Motorcycle_Parts_Accessories&hash=item4aaea8727d

This guy is more than happy for you to make a bucket from his RS bits :yes:

hillbillie

13th September 2011, 17:19

Unfortunately Clive will be stealing it from under your nose tonight.

This is my Tantrum : #&^%$*!!! :mad:
:girlfight:
:brick:
:bash:

Ag okay fine, good on you mate :drinknsin

kel

13th September 2011, 17:51

This guy is more than happy for you to make a bucket from his RS bits :yes:

Ouch $400Aus is a bit steep. Mark Hodgson sells NF4 frames for 100 pounds out of the UK.

Bert

13th September 2011, 18:52

This is my Tantrum : #&^%$*!!! :mad:
:girlfight:
:brick:
:bash:

Ag okay fine, good on you mate :drinknsin

Hillbillie
MC19

I've got one sitting under the house (frame,swingarm, shock) swap for beer??:innocent:

I come down often enough; could just chuck it in the car and bring it down...??

crazy man

13th September 2011, 20:04

Hillbillie
MC19

I've got one sitting under the house (frame,swingarm, shock) swap for beer??:innocent:

I come down often enough; could just chuck it in the car and bring it down...??l will get the new forks of you

hillbillie

13th September 2011, 22:54

hillbillie

13th September 2011, 23:04

l will get the new forks of you

Slap me on the ass while I #*%$ a duck and call me Donald, :eek5:
Excuse me partner, what ya’al mean you ya’ll get new forks for me, is it X-mass already cause sure as moon shines of my lily white ass, it ant my b-day? :shit:

Bert

14th September 2011, 06:31

I'll have a 6pack waiting on ice next time you are around Welly.
Thanks!!!

6pack... better be the good stuff :gob:
Maybe down later in the month; but I'll be in touch. PM me your details.

l will get the new forks of you

you know where I live, Crazy man; stop in for a coffee on the way home one night.
I wouldn't mind passing a couple of stupid ideas past you.:facepalm:

hillbillie

14th September 2011, 23:16

[QUOTE=Bert;1130152994]6pack... better be the good stuff :gob:
Maybe down later in the month; but I'll be in touch. PM me your details.

Well I say much obliged partner, this here horse of mine might get new life after all. Just hope that come Sunday she don’t go drop dead on me like my Pa did after he heard that he might get married a 3rd time……:facepalm:

Henk

16th September 2011, 19:14

Max Lyver's FXR back on the market. Don't think it has been run since he sold it

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-408005007.htm

Clivoris

16th September 2011, 20:48

Max Lyver's FXR back on the market. Don't think it has been run since he sold it

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-408005007.htm

Shame he didn't get to run it.

Henk

16th September 2011, 22:05

In hindsight, I think he may have turned up last month.
Didn't twig that it was Max's old bike or I would have gone over and said hello.

Gigglebutton

16th September 2011, 22:12

In hindsight, I think he may have turned up last month.
Didn't twig that it was Max's old bike or I would have gone over and said hello.

John is in the market for a bucket. Is this any good???

Henk

16th September 2011, 22:26

Nothing wrong with it.
Pretty stock FXR with all the bodywork and crash bungs fitted. Only thing I'd look at doing in the longer term would be wider rims, Max looked after it pretty well.

Yow Ling

25th September 2011, 13:08

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-409836928.htm

has a nsr shock in the box, maybe fit fxr

bartshumandad

25th September 2011, 19:08

Nothing wrong with it.
Pretty stock FXR with all the bodywork and crash bungs fitted. Only thing I'd look at doing in the longer term would be wider rims, Max looked after it pretty well.

Phaarrk, he suddenly puts a buy now on it while I wasn't looking, and minutes later some other bugga buys it!! Bugga, was looking forward to bidding for it! Trade Me's an auction site, dammit, isn't it? (rant over, sorry). Sorry, but have been waiting with it on my watch list for over a week, and counting down the days to sale day, just a bit disapointing to not have a chance to go for it.

Never mind, I am sure something else (maybe better) will come up soon.

Yow Ling

25th September 2011, 19:21

Phaarrk, he suddenly puts a buy now on it while I wasn't looking, and minutes later some other bugga buys it!! Bugga, was looking forward to bidding for it! Trade Me's an auction site, dammit, isn't it? (rant over, sorry). Sorry, but have been waiting with it on my watch list for over a week, and counting down the days to sale day, just a bit disapointing to not have a chance to go for it.

Never mind, I am sure something else (maybe better) will come up soon.

If you had put a bid on it then he couldnt have put a buy now on, he was probably a bit disapointed nobody bid !

bartshumandad

25th September 2011, 19:40

If you had put a bid on it then he couldnt have put a buy now on, he was probably a bit disapointed nobody bid !

Good point, but there was a bid, which was why I hadn't bothered starting my bids. Wonder if it was withdrawn or removed? Not many auctions will attract many bids a week out, particularly with an unknown reserve, that is just the way it works. It is the last hour where it is all at. There is a 'for sale' listing for those that don't want to go through the auction process.

Clivoris

25th September 2011, 20:12

If you had put a bid on it then he couldnt have put a buy now on, he was probably a bit disapointed nobody bid !

Except I did bid and he removed it. No drama though, it hadn't met reserve.

Ivan

26th September 2011, 15:25

could be a start for someone http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-410070941.htm

F5 Dave

26th September 2011, 16:40

pretty stupid name for a business they trade under. They claim they are a quad wrecker & don't stock bike parts.

Their handle is Bikeparts_ltd. erm Quadparts might have been a bit more kleverer:facepalm:

Henk

26th September 2011, 16:44

Having anything at all to do with quads makes your brain disolve, well known fact

Gigglebutton

27th September 2011, 17:30

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-410501724.htm

RMS eng

1st October 2011, 15:07

247716For sale yamaha TZR50 frame with engine mounts set up for suzuki TS100 motor,motor fitting work done by RMS eng.rear end has been set up to take 90-94 RS125 shock,but there is no shock with frame and wheels are TZR50 16" and 17" rear and just whats in photo.with W/C 16 HP TS100 motor and RS125 wheels bike was around 77KG and has done low 30.00 sec laps at Mt wellington.$450.00 or bust offer,Ph chris 09 817 9500

RMS eng

1st October 2011, 15:07

TZ350

2nd October 2011, 12:42

247765

TZR50 motor http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-411955645.htm

Ph chris 09 817 9500 for more info

chrisc

8th October 2011, 10:47

Unsure if it has been posted but I saw this and I know some of you are into MB100s
Probably just a box of crap

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-413621273.htm

timg

10th October 2011, 19:57

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/performance/auction-413930581.htm

chrisc

12th October 2011, 07:41

If only this was in Auckland!

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-414251111.htm

Buddha#81

12th October 2011, 14:53

If only this was in Auckland!

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-414251111.htm

fooken great way of carting around a FXR donk, fit a R6 shock and bang! ya can spend 3 x what they want for that to get a FXR to handle. Heres one I prepared earlier.

Yow Ling

19th October 2011, 20:55

248980
248981
248982

Couple of mikuni TM28 flatslides

one is RG250 kind $50

one is rg400/500 skinny one for disk valve motors $80

Gigglebutton

20th October 2011, 15:54

Nice bike, a bit pricey for NZ buckets
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120795662238+&viewitem=

Henk

23rd October 2011, 14:43

Have a 2005 CRF100 rolling frame I need to get rid of, if anyone here wants it let me know, otherwise I'll chuck in on TM at $1 reserve.

Dutchee

23rd October 2011, 19:19

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-417643722.htm TS100ER engine for buy now $110 (says he's had offers of $50 and $70 with reserve at $95). Just in case anyone's interested.
Oh, we'll be heading to the GP, so if any "foreigners" are keen, we'd be able to find room in the van for it (just not full bikes, we're outta room for that).
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-417445831.htm DT100 engine in Wellington

gav

24th October 2011, 15:29

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-417695289.htm

Looks like good value here.

F5 Dave

25th October 2011, 13:23

Well, yeah probably, but that bike did inspire this thread to be written
(see the bit about adaptor plates)
http://www.kiwibiker.co.nz/forums/showthread.php/126320-Building-bucket-brakes

Heck that is a well written post. Check out the last poster Gav!

that said the present owner who is a good guy did fix or improve a few of the main issues. Pity he is leaving the sport.

It seemed to go & handle well enough, but I'd go around it & check that every spacer & bracket is as you'd want it to be.

For the right price yeah it will be a fine bike (not trying to smeg the chance of it being sold).

gav

25th October 2011, 18:43

Hahahaha .... ohhhh ..... :blink:

Pumba

27th October 2011, 15:35

$1.00 reserve TS125's (http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-417887332.htm)

F5 Dave

27th October 2011, 16:01

Well he's gone all out with the sales effort there. Here's 3 photos of junk & the parts you get may be in here somewhere. Amongst shock absorbers & Cb125 single engines. Maybe. What a dick. Couldn't just spend the 5 min plonking them on a table & saying here this is what is for sale. Click. :facepalm:

jasonu

29th October 2011, 17:33

RS125 NF4 Rear Wheel 1991 thru 1993
In good useable condition
Tire not included, wheel only

$300 USD includes freight to anywhere in NZ or Australia
Contact Jasonulyatt.1@msn.com

DrunkenMistake

29th October 2011, 19:04

Dunno if anyone has seen this yet,
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-418520035.htm

chrisc

29th October 2011, 21:02

Dunno if anyone has seen this yet,
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-418520035.htm

Are they alloy or steel frames?

DrunkenMistake

29th October 2011, 21:45

Are they alloy or steel frames?

I would think Alloy, its possible its steel, had a quick Google search but didnt come up with much, that and I didnt really look that hard haha.

Would seem like an ideal bucket base for the price.

Moooools

30th October 2011, 13:13

I would think Alloy, its possible its steel, had a quick Google search but didnt come up with much, that and I didnt really look that hard haha.

Would seem like an ideal bucket base for the price.

Steel. Narrow wheels. Bad suspension. I don't want to stop people buying it, but they really aren't a good starting point if you want a good handling chassis.

If you just want a chassis however, go for your life.

k14

30th October 2011, 13:56

Steel. Narrow wheels. Bad suspension. I don't want to stop people buying it, but they really aren't a good starting point if you want a good handling chassis.

If you just want a chassis however, go for your life.
What are the widths of the rims?

Buddha#81

30th October 2011, 14:00

Moooools

30th October 2011, 14:06

Tell Jake Lewis and the Hoogie brothers that, they seen to get on ok when kicking everyones asses on them!

Oh yeah for sure I have seen the videos of them and they are flying. But they have proper race shocks and maybe reworked front end?
And those engines go like stink.

However as a starting point for a fast bucket with some other engine they are far from ideal.
You would be far better off putting a bid on that nor and stripping it down.

Henk

30th October 2011, 15:05

From what I've seen and heard the narrow rims are less of an issue on the long tracks than they are on the Kart tracks us Northerners usually run on.

Rick 52

30th October 2011, 16:43

GL 145
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-418797514.htm

cotswold

2nd November 2011, 19:25

http://www.ebay.co.uk/itm/honda-rs125-metrakit-conti-derbi-/190594786377?pt=UK_Motorcycle_Parts&hash=item2c6055a449#ht_500wt_1361

nice

Rick 52

2nd November 2011, 20:05

http://www.ebay.co.uk/itm/honda-rs125-metrakit-conti-derbi-/190594786377?pt=UK_Motorcycle_Parts&hash=item2c6055a449#ht_500wt_1361

nice

Shit your not wrong!! Is it up north ??

gav

2nd November 2011, 21:00

LOL, not sure why he's posted it here, it's in the UK mate!

F5 Dave

3rd November 2011, 09:52

yeah right up north. Heck I'm sure you could land it here for 5k & a few months wait.

ajturbo

3rd November 2011, 15:39

http://www.ebay.co.uk/itm/honda-rs125-metrakit-conti-derbi-/190594786377?pt=UK_Motorcycle_Parts&hash=item2c6055a449#ht_500wt_1361

nice

and i have the aussie importer contact if you want to replace anything... yeah, they not here in NZ...

Dutchee

4th November 2011, 16:14

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-420453761.htm yamaha something down wellington
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-420789538.htm on that other island - rs125 (1994) chassis