Bucket bits 4 sale

[Rick 52]

http://www.trademe.co.nz/business-farming-industry/industrial/manufacturing-metalwork/metal-supplies/auction-422482423.htm

Nylon track protection

[TZ350]

http://www.trademe.co.nz/Browse/Listing.aspx?id=424848013

A copy of MOTA 6.10 2-Stroke engine development software.

Sold this software sold through the buynow option within an hour of going on Trademe.

[richban]

http://www.trademe.co.nz/Browse/Listing.aspx?id=424941538&ed=true

[Clivoris]

http://www.trademe.co.nz/Browse/Listing.aspx?id=424941538&ed=true

Would that be the shizzle for my CBR Rich?

[husaberg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=424941538&ed=true

Why are you selling it Rich. I seen it on trademe when you brought it. I remember thinking at the time how much of a difference a real carb would make to a FXR150. Was it not a goer on the tractor.

[Moooools]

Would that be the shizzle for my CBR Rich?

It probably would be the 'shizzle' (:facepalm: old people...) if you have the patience to set the thing up.
My understanding is that they are not the simplest of things.


But I would like to hear why Rich decided not to use it on his rocket ship.

[Moooools]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-423539497.htm

A nice set of wheels for your FXR. Not cheap but all the work has been done for you.

[husaberg]

It probably would be the 'shizzle' (:facepalm: old people...) if you have the patience to set the thing up.
My understanding is that they are not the simplest of things.


But I would like to hear why Rich decided not to use it on his rocket ship.

He might have realised that his bike has far to many moving bits and only fires once every 2 revolutions. Whats up with that?

[TZ350]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-425063632.htm

Suzuki GP100 Engine .....

[richban]

Why are you selling it Rich. I seen it on trademe when you brought it. I remember thinking at the time how much of a difference a real carb would make to a FXR150. Was it not a goer on the tractor.

Reason for selling is I have another one. Need the money. It should be one of the best carbs around for a tuned 150. As it is off a crf I figer the needle will be bang on and the jetting not to far out. I have been to lazy to set it up coz I will need to make a manifold. I have the Ali now so not long. It is a bargain band new and all that.

Could also have something to do with fuel injection. Or not. Or maybe yes.

[Pumba]

I have been very tempted a couple of times taht you have put it up on trade; however the piggy bank is empty:bye:

Would you consider a Payment Plan? $1 a week, interest fee. Come on you know you want to.

[Pumba]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-423539497.htm

A nice set of wheels for your FXR. Not cheap but all the work has been done for you.

Stupid money for those wheels I personally feel. Even if the work has been done.

[Drew]

Stupid money for those wheels I personally feel. Even if the work has been done.

Are you joking? $400 clams for a pair of wheels to fit a common race bike, that's a farkin bargain.

I am skeptical about the "work's been done for you" bit. How much bloody work could there be?

[richban]

Stupid money for those wheels I personally feel. Even if the work has been done.



Well I sold a set off RS125 wheels for 550 a year ago. Stupid fool. Them wheels are heavy. I wouldn't call them race bike wheels. 800 is taking the piss.

[Pumba]

Are you joking? $400 clams for a pair of wheels to fit a common race bike, that's a farkin bargain.

I am skeptical about the "work's been done for you" bit. How much bloody work could there be?

Everyone is entitled to there own opinion. But I would be wanting something a shit load lighter than commuter bike wheels for that money.

As for the work done. As the are off the GSF250, and looking at the pics I would say that work done includes bearings replaced for FXR axle size, center spacer fabricated or bored out, spacers fabricated, and I am pretty sure those disks have been turned down to match the standard FXR disk sizes and brake caliper locations, but I am not 100% sure on that.

[Roger]

http://www.trademe.co.nz/Browse/Listing.aspx?id=424941538&ed=true So this is a new unmolested in any way carb just as it came from the factory? The "Rubber spigot connector not shown" will suit an FXR? What's the electrickery connectors for? Some kind of solonoid? Thanks Rich.

[Bert]

Well I sold a set off RS125 wheels for 550 a year ago. Stupid fool. ... 800 is taking the piss.

And I'm still laughing :woohoo::woohoo::woohoo:

[Moooools]

So this is a new unmolested in any way carb just as it came from the factory? The "Rubber spigot connector not shown" will suit an FXR? What's the electrickery connectors for? Some kind of solonoid? Thanks Rich.

Throttle Position Sensor would be my bet.

[Bert]

some interesting TM bits:

rough as FXR (Auck).
someone with the right parts could sort out the engine Fups (gear sector shaft!!).:sick:
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-424780090.htm

not so rough FXR (ChCh)
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-425428106.htm

Roller (RGV150) with 17" and slicks:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-424412278.htm

another RGV150 Roller (x2 actually):
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-425322508.htm


It people are tempted to get into buckets then some of the above could be a great start..

[Shorty_925]

Everyone is entitled to there own opinion. But I would be wanting something a shit load lighter than commuter bike wheels for that money.

As for the work done. As the are off the GSF250, and looking at the pics I would say that work done includes bearings replaced for FXR axle size, center spacer fabricated or bored out, spacers fabricated, and I am pretty sure those disks have been turned down to match the standard FXR disk sizes and brake caliper locations, but I am not 100% sure on that.

General post here - quoting Pumba as pretty much on the money for what has happened to the wheels.

Depends on how much skill(s) you do or do not have with a Lathe(sp). If you dont then its going to cost you, pretty simple really. Nothing for free or cheap these days. If you are lucky enough to find a set of wheels at a cheap price then good on ya.

If everyones concerned bike weight, the FXR's would be replaced with RS rolling chassis with a two-stroke motor with Ti bolts littering the bike & engine. Otherwise just hold the throttle wide open, brake later.

[SHELRACING]

Being an smelly old 2 stroke it might be worth $2 to someone

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-430337623.htm

[F5 Dave]

That doesn't look like a GP125. In fact it doesn't look like any sort of 125. Typical trademe miss-listing by someone who was clueless about what sort of bike they owned.

[SHELRACING]

That doesn't look like a GP125. In fact it doesn't look like any sort of 125. Typical trademe miss-listing by someone who was clueless about what sort of bike they owned.

You're right Dave looks more like a 100, It has a toe - heel gear change, maybe an ax100 ?.

Perhaps it's not even worth the $1 already on it then !

[F5 Dave]

Yeah AX is my bet, but I don't take that much note of that sort of stuff. Skunk would tell you which model it was. And no I think $1 is a bit rich:innocent:

[Drew]

Damn, I bid before checking it out more closely. I don't want it if it's not a 125!

[koba]

I don't want it if it's not a 125!

Sarcasm?

The capacity isn't the weak point.

A good hundred can be as good as, or better than, a 125.
Does depend on which 100 vs. which 125.

Problem with the AX motor is they have a shit gear box for race use and an average engine design.
I don't know of anyone finding another gearbox that goes in. I know Skunk investigated quite a few options and none fit.

I've always thought they went backwards from the A100.
Probably cheapening.

[Arronduke]

http://www.trademe.co.nz/Browse/Listing.aspx?id=428738828

look good... I need a front if anyone just wants a rear?

[Kendog]

http://www.trademe.co.nz/Browse/Listing.aspx?id=428738828

look good... I need a front if anyone just wants a rear?
They seem a bit wide
Seller Comment: Correction front 17x3.25 and rear 17 x4.5.

[Arronduke]

you might be correct... I did not read that.... I just need a GSXR250 front rim... guess its an ealier model that I need..

[Henk]

They look like GSX250 wheel, myself and others have looked at these and decided that it's a bit too hard with the single disk front and all.

[Gigglebutton]

http://www.asphaltandrubber.com/products/star-wars-stormtrooper-leathers/ :bleh:

[cotswold]

http://www.asphaltandrubber.com/products/star-wars-stormtrooper-leathers/ :bleh:


Well mr. Bottom here is a bike to go with those leathers and is a bargain for all those who like orange.

http://www.trademe.co.nz/Browse/Listing.aspx?id=430803342&ed=true

[koba]

Well mr. Bottom here is a bike to go with those leathers and is a bargain for all those who like orange.

http://www.trademe.co.nz/Browse/Listing.aspx?id=430803342&ed=true

Would this be a good B-grade starter bike?

[Clivoris]

Would this be a good B-grade starter bike?

Utter bargain. If I wasn't buried under an avalanche of 150s, it would be in my garage this weekend.

[cotswold]

Would this be a good B-grade starter bike?

:yes I doubt you could find anything better for a B grade starter, it is a top 10 bike in A grade with an old fulla on it;)

[Kendog]

For people interested in seat foam, especially in Wellington. Check this thread:
http://www.kiwibiker.co.nz/forums/showthread.php/144757-Race-seat-foam-pad

[Henk]

:yes I doubt you could find anything better for a B grade starter, it is a top 10 bike in A grade with an old fulla on it;)

So if I buy this will they let me into B grade?

By the way this is too cheap. Someone buy it before I get tempted to add to the FXR collection in the shed just to steal the engine and pipe.

[cotswold]

So if I buy this will they let me into B grade?

By the way this is too cheap. Someone buy it before I get tempted to add to the FXR collection in the shed just to steal the engine and pipe.

B grade Henk has no ring to it! so no, You are right I reckon this is a steal.

[gav]

you might be correct... I did not read that.... I just need a GSXR250 front rim... guess its an ealier model that I need..
Couple of RGV250 front rims for sale if they would fit?
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-429449286.htm

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-429449237.htm

[cotswold]

So if I buy this will they let me into B grade?

By the way this is too cheap. Someone buy it before I get tempted to add to the FXR collection in the shed just to steal the engine and pipe.

http://www.trademe.co.nz/Browse/List...803342&ed=true

\You could be right a young guy, originally from Wellington, just took it away.....

[Moooools]

http://www.trademe.co.nz/Browse/List...803342&ed=true

\You could be right a young guy, originally from Wellington, just took it away.....

Sounds like a right dickhead.

[Dutchee]

Sounds like a right dickhead.
Because he's ex-Wellington? That's not very nice, but I guess it's probably true as he's been kicked out of Wellington?
So, when we going to see you at Mt Wellington on #4, then?

[Moooools]

Yeah those Wellington people. Just couldn't put up with me anymore. Tied me to a mule, backwards and blindfolded, with a carrot and stick. Banished me from the land. They are still very traditional as western culture hasn't reached them yet.

You will see me this Saturday I think.

Although you won't see me riding a dirty FXR chassis. My brother will probably be on it.

He is a bit of a novice to motorised two-wheeled machines, so I hope that is alright and he will be allowed to get out on the track at some point.

[Henk]

Your brother will be fine. Numbers will probably be well down this weekend as no points are up for grabs.
If he feels it might help he can probably head out for a wobble on his own at some stage. You're in for a bit of a rude shock after Kaitoke, Mount Wellington is going to seem like a goat track compared. I would offer to give you some pointers but you'll be beating me soon enough without my help in any case.

[F5 Dave]

Wow MB100 piston. What a deal!! Good coffee table art. You need it now you stinking 4 stroke kissing pansies!

http://www.trademe.co.nz/Browse/Listing.aspx?id=432593309&ed=true

[Moooools]

Wow MB100 piston. What a deal!! Good coffee table art. You need it now you stinking 4 stroke kissing pansies!

http://www.trademe.co.nz/Browse/Listing.aspx?id=432593309&ed=true

Could you put some valve recesses in it for me?

[Yow Ling]

Could you put some valve recesses in it for me?

Give it a good rev, 4 strokes do it automatically

[Drew]

Could you put some valve recesses in it for me?Dunno if you want him machining it, did you not read why he couldn't use the piston when originally bought?

[F5 Dave]

Wasn't me, I didn't have a lathe back then & I knew someone I thought could use one. Brand new barrel it was too, bought from redundant spares through a honda shop. Cost me $80 for the barrel that had never had a piston in it. The piston was more expensive. He thought he could weld too, that finished off the barrel.

[quallman1234]

125GP Bridgestone slicks for sale... YDC Front and Rear (soft)... Still heaps of tread left...
Rode on them last weekend heaps of grip still, perfect for a bucket.

120$, Wellington only.

[quallman1234]

125GP Bridgestone slicks for sale... YDC Front and Rear (soft)... Still heaps of tread left...
Rode on them last weekend heaps of grip still, perfect for a bucket.

120$, Wellington only.

Sold to the quickest person. Only took 20 minutes... :)!

To all, i'll have a couple of sets of mint tyres after nationals for sale. Only one weekend old. 180$, will post up here when they are avaible.

Cheers
Kyle

[hal20308]

Sold to the quickest person. Only took 20 minutes... :)!

To all, i'll have a couple of sets of mint tyres after nationals for sale. Only one weekend old. 180$, will post up here when they are avaible.

Cheers
Kyle

Kyle - I'm in. Front slick gave up the ghost on Sunday at Kaitoke and started deflating slowly......need a set for the planned January Buckets Only day that Hamish mentioned.....
FLick me a text on 021 754 601 when you're ready. Cheers - Nick.

[quallman1234]

Kyle - I'm in. Front slick gave up the ghost on Sunday at Kaitoke and started deflating slowly......need a set for the planned January Buckets Only day that Hamish mentioned.....
FLick me a text on 021 754 601 when you're ready. Cheers - Nick.

I am down south untill the 24th, hopefully the round is the next weekend after. These tyres should have a sick amount of grip, being one weekend old and all.

Let me know if its too late.

Cheers
Kyle

[hal20308]

Hi Kyle,
24th of Jan I presume? Gah - that means I'll not have them for the two Kaitoke meets. Any tricks we can pull to get them to me earlier? Happy to jump in the truck anywhere around the Wellington region if I need to!
Cheers
Nick

[Henk]

Kyle

If it works for you sell the ones I had lined up to someone else and I'll take the 24th of Jan ones.

[hal20308]

Kyle

If it works for you sell the ones I had lined up to someone else and I'll take the 24th of Jan ones.

Henk,
Many thanks for that, your a gentleman!
Kyle - let me know if that will work.

Cheers
Nick

[Moooools]

Henk,
Many thanks for that, your a gentleman!
Kyle - let me know if that will work.

Cheers
Nick

Obviously you have not met Henk.
I could probably think of fifty nouns that fit him better than gentleman.

[F5 Dave]

And an adjective starting with 'W':tugger:

heehee.

[Dutchee]

And an adjective starting with 'W':tugger:

heehee.
woman? wierdo? wannabe?
He's sulking now (yay) and that's the last time he's helping either of you two.
i guess he doesn't luv you long time any more

[F5 Dave]

That's ok, I'm assuming he will have forgotten by the time we get to Tauramanui and I'll be safe from any repercussions:sweatdrop

[hal20308]

Obviously you have not met Henk.
I could probably think of fifty nouns that fit him better than gentleman.

Max - making friends already with your new bucketeers ooop north then :eek5:

Henk - I'd just nudge him onto the grass at the first corner of a track he doesn't know if I where you ;)

[Henk]

I'd punt him into the weeds in a heartbeat, but he's probably right, besides he didn't seem to need any help parking it last weekend so running him off at the sweeper is probably overkill.

[Ivan]

incase someones doing a f3 project or something I have some ZZR600 rims for sale 250 ono

[Buckets4Me]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/performance/auction-435258956.htm

fxr-tzr100 bucket

[Bren_chch]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/performance/auction-435258956.htm

fxr-tzr100 bucket

ohhh that looks fun!

[Buckets4Me]

ohhh that looks fun!

http://www.kiwibiker.co.nz/forums/showthread.php/105446-Yamagama-100

i belive this is the start of it

[Pumba]

ohhh that looks fun!

Looks like you will be able to tell us just how much fun it will be:bye:

[husaberg]

Fxr150 motor fixer upper as a spare
http://www.trademe.co.nz/a.aspx?id=436294982 (http://www.trademe.co.nz/a.aspx?id=436294982)

RGV250 bits going cheap
http://www.trademe.co.nz/Members/Listings.aspx?member=304233
(http://www.trademe.co.nz/a.aspx?id=436294982)

[Ivan]

Im selling on behalf of my dad his rims of one of these zx250 ninjas they are brand new pretty much with discs and cush drive http://2.bp.blogspot.com/-MGccMCzPr3g/Ti1JlnzarrI/AAAAAAAAAhI/J__CFKSey2g/s1600/kawasaki-ninja-250-r.jpg

300 ono these are perfect width for fitting 125 gp sized tires

[Squiggles]

I've got a GN250 Carb, bit of corrosion externally. Have taken the top off and couldn't see any holes in the diaphragm. Came off my commuter GN when I scrapped it at the start of last year. Hoping to get $40 for it.

[Rick 52]

Good starter CB 125 single Ay Henk ?
http://www.trademe.co.nz/a.aspx?id=438705099

[cotswold]

Good starter CB 125 single Ay Henk ?
http://www.trademe.co.nz/a.aspx?id=438705099

Can it be ridden with one hand?

[Henk]

Good starter CB 125 single Ay Henk ?
http://www.trademe.co.nz/a.aspx?id=438705099

Not a bad starter bucket. Main problem is the tyres, BT39s that I put on that must have about four race meets and a two hour on them, but super skinny and easy to ride off the edge, also when you start climbing all over it like a monkey to try and hold more corner speed the pipe can melt your right boot.


Can it be ridden with one hand?

Unfortunately not, if it could be, and I had seen it on TM early enough I might have bought it back.

[quallman1234]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-437879804.htm

[Pumba]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-437879804.htm

Just have to sleeve it down and then install it in your choice of frame backwards to get the drive sprocket on the "normal" side:laugh:

[husaberg]

Just have to sleeve it down and then install it in your choice of frame backwards to get the drive sprocket on the "normal" side:laugh:
Then after you have sleeved it you might want to destroke as well. :confused:
Is that factored into the plan?:innocent:
If you flip the wheel in most frames it will be on the right side for a Rotax or Aprillia.

[Pumba]

Yes of course, the problem with just turning around the wheel is that unless it a really old frame with a spindly little swing arm that is symetrical, something always gets in the way.

All in theory of course:innocent:

[Dutchee]

http://www.kiwibiker.co.nz/forums/showthread.php/145787-Suzuki-EN125-Bucket-Racer good starter bucket for someone down Wellington region. even if that's about the crappiest ad I've seen ;)

[F5 Dave]

Yeah he's a kunt. get a haircut , oh wait, he did.

[koba]

http://www.kiwibiker.co.nz/forums/showthread.php/145787-Suzuki-EN125-Bucket-Racer good starter bucket for someone down Wellington region. even if that's about the crappiest ad I've seen ;)


Yeah he's a kunt. get a haircut , oh wait, he did.

Cheers guys, love to love you two too.

[Shorty_925]

160 engine?

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-440136504.htm

[ajturbo]

a bit big...:bash:

[Bert]

Two stroke project for someone..

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-442353512.htm

bore & Stroke: 54mm x 54.5mm (not ideal but workable).


Sidecar Auckland
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-442063754.htm

[ajturbo]

Two stroke project for someone..

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-442353512.htm

bore & Stroke: 54mm x 54.5mm (not ideal but workable)

isn't it a race engine?:corn:

[Bert]

isn't it a race engine?:corn:

No AJ
Put your pop corn away.

[Pumba]

Two stroke project for someone..

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-442353512.htm

bore & Stroke: 54mm x 54.5mm (not ideal but workable).


Sidecar Auckland
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-442063754.htm

Saw that a little while ago. More interested in seeing the new engine in the frame as that sounds like a barrel of laughs.

As for the sidecar, well, umm, yes, I saw that flip. It was terrifying to watch:shit:

[Henk]

As for the sidecar, well, umm, yes, I saw that flip. It was terrifying to watch:shit:

Minor details, you have room in the shed, and on the trailer, go on, you know you want to.

[koba]

I make that Honda engine to be 167cc, is my maths correct?
EDIT: Sleeve down to 62mm? Worth it?

[Henk]

I make that Honda engine to be 167cc, is my maths correct?
EDIT: Sleeve down to 62mm? Worth it?

I get 166.79
Close enough to your answer

[Bert]

Saw that a little while ago. More interested in seeing the new engine in the frame as that sounds like a barrel of laughs.

I was thinking the same thing...


As for the sidecar, well, umm, yes, I saw that flip. It was terrifying to watch:shit:

I've got better photos; us flipping stinky (gsxr1100 posty; first ever corner taken....:facepalm::confused:) the training wheel was on the wrong side...

[husaberg]

I make that Honda engine to be 167cc, is my maths correct?
EDIT: Sleeve down to 62mm? Worth it?

Ask Marsheng he is still trying to find a suitable affordable piston.

I think the best and easiest way is to use a slightly oversize 125 piston and a XR185/200 crank.
My opinion is the Honda 2 valver aren't capable of utilizing the rev range achievable a short stroke.
Not to mention the combustion shape it will have if you were to try to achieve a decent comp ratio with a short stroke 2v Honda engine. People forget that. Martin is a nice guy though knows his small Honda's.

[koba]

Ask Marsheng he is still trying to find a suitable affordable piston.

I think the best and easiest way is to use a slightly oversize 125 piston and a XR185/200 crank.
My opinion is the Honda 2 valver aren't capable of utilizing the rev range achievable a short stroke.
Not to mention the combustion shape it will have if you were to try to achieve a decent comp ratio with a short stroke 2v Honda engine. People forget that. Martin is a nice guy though knows his small Honda's.

Makes sense.

[Pumba]

Minor details, you have room in the shed, and on the trailer, go on, you know you want to.

Wants? I am not allowed to have any of those any more.

[quallman1234]

I have a 1991ish RS125 Set of rims for sale. Make some offers yo.
3" Rear 2.25" Front
Real light.
No discs.
Front set up for a +95 RS125

[F5 Dave]

I'll give you some rep every day I log on & remember?

(my budget is a bit sore atm, otherwise I'd be keen).

I could insult you with a hundy starting bid.

[quallman1234]

I'll give you some rep every day I log on & remember?

(my budget is a bit sore atm, otherwise I'd be keen).

I could insult you with a hundy starting bid.

:pinch: Insulted i am.

On a side note, just weighed them on my crappy house hold scales

2.5kg for the front (without disc)
4kg for the rear (with disc)

[cotswold]

I'll give you some rep every day I log on & remember?

(my budget is a bit sore atm, otherwise I'd be keen).

I could insult you with a hundy starting bid.

Dave I only want the front go halves on the pair??

[F5 Dave]

I bought my first set of NF4 wheels complete with MB100 rolling chassis for $150 so I'll stretch to that.:sunny:

Problem is I owe some money & I don't know how much, having trouble finding out. Despite having the work done 5 months ago. Doin my ead in.

[F5 Dave]

Dave I only want the front go halves on the pair??
I really want as spare wets, I have spoked RS hubs but disc is only ~270 not 300 & different pattern + my rear rim is too narrow.

So here's the deal. Send me a custom front disc with the right Dia, mounting & offset + a 3 or 3.5" 17" spoked rim which I can lace to my existing set up & I'll step aside & let you have these. can't say fairer than that.

Except now I want spares for my 50 as well as 100. Grrr.

[quallman1234]

Sorry guys, only selling as the pair. Will try get a price up soon.

They came with spacers to suit a NX4 front end and the rear kinda, so they will need played around with to fit the NF4 again.
Need to replace them with proper NX4 wheels :).

[hillbillie]

:Oops:Howdy ya’al :violin:
Sorry to bother all you kind folk, but I’m in need of a good rolling chassis :Punk:. Now I do have some $$:bash: but not a lot so if any of you know where I might find something full size to fit a 1.8m long legged fine young gentlemen such as myself:brick:, please do point me in the right direction.

Oo, I am still a L-plate therefore I am unable to respond via personal massages. Sucks I know :facepalm:

[hmurphy]

Anyone keen on an FXR150 for $800 ONO? Already has slicks on it and some crash protection (main crash knobs). Will come with an already modified muffler, just needs to be fitted under the bike. Also comes with the standard muffler. It can come with a few other little bits and pieces but it's all ready to race as it is. It has a nice new battery and electric start too. It has a race seat also which will need to be tidied up a bit. Pics attached. Please PM me or txt my cell because I won't look back at this thread haha. 027 303 2486

[Drew]

Can I put $50 deposit, and pay ya five dollars a week forever? LOL

I'm pretty sure you'll sell that quickly brickly bro.

[richban]

I have a set of FXR wheels for sale if anyone wants them. Make me an offer. With almost new disc's and sprocket and drive rubbers.

[Dutchee]

I have a set of FXR wheels for sale if anyone wants them. Make me an offer. With almost new disc's and sprocket and drive rubbers.

How much are you after for them & can you bring to Tokoroa? I'll get Henk to make a phone call, but will be better if Warwick has some clue how much.

[richban]

How much are you after for them & can you bring to Tokoroa? I'll get Henk to make a phone call, but will be better if Warwick has some clue how much.

$150ish And yep can bring to Tokoroa.

[Henk]

Rich, Warrick will take those wheels at Tokoroa.

[hillbillie]

Anyone keen on an FXR150 for $800 ONO? Already has slicks on it and some crash protection (main crash knobs). Will come with an already modified muffler, just needs to be fitted under the bike. Also comes with the standard muffler. It can come with a few other little bits and pieces but it's all ready to race as it is. It has a nice new battery and electric start too. It has a race seat also which will need to be tidied up a bit. Pics attached. Please PM me or txt my cell because I won't look back at this thread haha. 027 303 2486

But that is a steel frame is it not.................?

[hillbillie]

Can I put $50 deposit, and pay ya five dollars a week forever? LOL

I'm pretty sure you'll sell that quickly brickly bro.

Bahahaha, if were not so stuck-up you would have been out there already! :laugh:
LoL........................:bash:

[ajturbo]

But that is a steel frame is it not.................?

cool.. means we can weld things to it:bleh:

[Drew]

Bahahaha, if were not so stuck-up you would have been out there already! :laugh:
LoL........................:bash:Am I missing something? Your sentence seems less than complete.

[richban]

Rich, Warrick will take those wheels at Tokoroa.

Sweet. Done.

[hillbillie]

Am I missing something? Your sentence seems less than complete.

No worries mate, go have fun:msn-wink:

[husaberg]

Am I missing something? Your sentence seems less than complete.

Much like this thread where the rest Drew?

Progress update.

Got the points gap right today, and it ran heaps better. Opened up the muffler on the pipe, and played with jetting.

Got it running best so far by a long way, but when onboard and loaded up, just where you'd expect it to come on real strong, it peters out.

Had to jet it down way too far considering the pipe and carb that's on it, to achieve the level that it's at. So this is kinda indicative that it's still not sparking cleanly at higher revs.

Next thing is gonna be a new condenser on the ignition circuit to eliminate the only thing that could still be wrong in said circuit. I'm also dubious of the reed block, the stoppers that make the reeds progressive were all different shapes when I got it, and although I straightened them to a more uniform curve, who knows how closely they resemble what they looked like from the factory.

From there if it still aint right, it's a sheet of 1mm steel plate, a book, a welder, and a whole lot of time building an expansion chamber that is tuned for the flow and combustion chamber of this engine.

[Drew]

Much like this thread where the rest Drew?All the posts directed at me saying I can't think for myself untill I've ridden the bike, have motivated me to get it sorted this weekend. Unless I need to make a pipe, that'll take some time.

[boostin]

RGV250 (vj22 I think) frame and swing arm. Comes with triples clamps and one fork.

$100

257072

[F5 Dave]

VJ21, that is easy, even has forks in picture.

Still used on many buckets so a good deal.

[boostin]

VJ21, that is easy, even has forks in picture.

Still used on many buckets so a good deal.

has a fork in the picture! Once had big plans but now selling.

Also have a Suzuki gt125 twin engine, offers?

[Bert]

Shed clean up.

Older 1995-98 RS125 fairing kit. (not the seat).
Will fit an FXR chassis. A bit of bling for the GP.

needs a new screen (but I do have a template; which someone can cut a new one)

$260 ono plus shipping. (drop off can be arranged for Wellington or local).


<<<< Gone >>>>

[Farmaken]

Shed clean up.

Older 1995-98 RS125 fairing kit. (not the seat).
Will fit an FXR chassis. A bit of bling for the GP.

needs a new screen (but I do have a template; which someone can cut a new one)

$260 ono plus shipping. (drop off can be arranged for Wellington or local).

Hi Bert,I am keen. Could you get a price to ship to Rotorua please?

Cheers Ken

[Drew]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/dirt-bikes/auction-442144850.htm

Are these motors allowed? Bike can be registered for the road.

[ajturbo]

wow.. that is interesting..!! who on here can say???

[TZ350]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/dirt-bikes/auction-442144850.htm

Are these motors allowed?

Looks like it, but need to ask, 24mm carb? and is it air cooled? hard to tell from the pic.

[richban]

Looks like it, but need to ask, 24mm carb? and is it air cooled? hard to tell from the pic.



Has big fat radiator.

[ajturbo]

radiator = bugger :no:

[Kickaha]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/dirt-bikes/auction-442144850.htm

Are these motors allowed? Bike can be registered for the road.

100cc is the limit for watercooled, 125cc for aircooled

[quallman1234]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/dirt-bikes/auction-442144850.htm

Are these motors allowed? Bike can be registered for the road.

No it is not legal. Because it is a 125cc 2 stroke watercooled engine, and probably has a carb larger than 24mm.

[Bert]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/dirt-bikes/auction-442144850.htm

Are these motors allowed? Bike can be registered for the road.

a rebranded RM125; but true to rules its not a race engine; but would require sleeving down (memory they are 56x50 with a 15mm pin) so it could be easy to make a 100cc watercooled.


100cc is the limit for watercooled, 125cc for aircooled

cuts the water jacket off and weld some fins on (with a 24mm Carb),,

[Drew]

100cc is the limit for watercooled, 125cc for aircooledYeah, I didn't notice the radiator cap till after I posted it on here.

Downsizing it and chucking a 24mm flat slide on there would still be a very formidable motor for the money.

[F5 Dave]

Drew, c'mon man, pay attn:laugh: Have a lift-plus or something.

[F5 Dave]

By that I meant if you sleeved it you could slam on a 38 & it would be legal.:msn-wink:
I doubts it is particularly RM spec'd, it just wouldn't last.

[jasonu]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/dirt-bikes/auction-442144850.htm

Are these motors allowed? Bike can be registered for the road.

Shit stirrer

[Drew]

Shit stirrer

Why is it that only one person gets me?

[Moooools]

Why is it that only one person gets me?

IQs less than 52?







http://en.wikipedia.org/wiki/IQ_reference_chart

[jasonu]

IQs less than 52?







http://en.wikipedia.org/wiki/IQ_reference_chart

52IQ can sometimes make you look smart in these parts...

[F5 Dave]

Hey you chose to move to Oregon.

[Drew]

Hey you chose to move to Oregon.And raised the average IQ in both places!

[koba]

IQs less than 52?







http://en.wikipedia.org/wiki/IQ_reference_chart

Bah, screw that new-age PC shit; Stanford-Binet spells it how it is!

http://en.wikipedia.org/wiki/Stanford-Binet_Intelligence_Scales

[Clivoris]

As seen in the pics. I have a pair of treaded tyres for sale. The front is an IRC Racing Series: Wings NR77s "not for highway use" 80/90-17. The rear is an IRC Eaglegrip NR73s: 100/80-17 dot approved. These came off a CBR150 with under 300k on the clock. Running slicks now so excess to requirements. $80 for the pair.258153258154258155

[ajturbo]

As seen in the pics. I have a pair of treaded tyres for sale. The front is an IRC Racing Series: Wings NR77s "not for highway use" 80/90-17. The rear is an IRC Eaglegrip NR73s: 100/80-17 dot approved. These came of a CBR150 with under 300k on the clock. Running slicks now so excess to requirements. $80 for the pair.258153258154258155

pff.. i'll still fall off

[Clivoris]

pff.. i'll still fall off

Ha. Didn't see you falling off on Sunday.

[ajturbo]

Ha. Didn't see you falling off on Sunday.

thats cause i was wanting to sell it.. that why i was taking it easy on mihi... HONEST:brick:

[Dutchee]

thats cause i was wanting to sell it.. that why i was taking it easy on mihi... HONEST:brick:

Hmmm, so that was the reason at Tokeroa as well, or was that just hung over?

[speights_bud]

Here's a trailer to put a few buckets in?

http://www.trademe.co.nz/Browse/Listing.aspx?id=450057276

[Dutchee]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-452225063.htm - has been out at Mt Welly a couple/few times, so should be ready to go

[mark171282]

on my first day out on my bike (honda xr200r 2000) bought from trademe i broke the rear shock, i can only find brand new ones online and there $600+, does anyone know where to get second hand ones from? thanks mark

[F5 Dave]

Hi you've obviously stumbled here & should try the dirt section. But a wrecker is obvious source, try Craig Bailey. Or Briun rebuilds shocks, possibly can be saved. Google for contact details.

[Dutchee]

Hi you've obviously stumbled here & should try the dirt section. But a wrecker is obvious source, try Craig Bailey. Or Briun rebuilds shocks, possibly can be saved. Google for contact details.

It's Bruin ;) If you go to any Waitemata club event, ask any of the organisers if TJ's there. He's more likely to be at a Riverhead event than a Woodhill one, though (but is also known to turn up these days to Woodhill, or he was last time I rode my dirtbike).

Another person to talk to is Warren Bridger, as he's worked on XR's since year dot and has a pretty good rep with them. If you want either phone number, send me a PM and I'll point you in the right direction.

Both are in Auckland, not sure where you're based.

[TZ350]

258759

30mm power jet Lectron (28 at the slide) on Trade me $75 start no reserve $125 buynow.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-453034746.htm

[Bert]

Crazyman and myself have been working with a few overseas suppliers for bits and pieces (consumables) for the CrazyFrames..

Clip-ons
IManaged to find a supplier for 33mm clip-ons (suitable for FXRs); we've been using the 45mm version. very nice light bars (~ same weight as the WoodCrafts).

258880

CNC 6000 series; they will work out at $125 set (plus shipping in NZ max $15). cheaper than Ebay/Trademe..
($150 for 50mm version; other sizes available if pre-ordered soon).
Before we rush off and bulk order, I'd be keen to get an idea of interest before we commit $$.


Front master-cylinders
Another thing we have had some success with
($80 with the current exchange rate)
258881
(hoping Rich/Clive/Andrew might provide some feedback here..)

Thanks Drew: three options from what I recall (I'll get the list of specs soon): 12.7mm, 14mm, 16mm

We have been using the 12.7mm version but sizes range up to 19.5mm

I'll bring a few bits along to the GP for people to look/touch/replace broken bits etc.

[Drew]

What's the piston size on that master cylinder?

It'd almost certainly be too big to mount on anything only running one disk. Unless front end loss is the goal.

[Clivoris]

What's the piston size on that master cylinder?

It'd almost certainly be too big to mount on anything only running one disk. Unless front end loss is the goal.

Exactly what I thought bro, but it works great. Heaps of lever pressure and feel. Suprised the shit out of me. The best bit is the "wanker" look I get when people see it on a bucket. Priceless. Give mine a squeeze next time you see me.

[F5 Dave]

What's the piston size on that master cylinder?

It'd almost certainly be too big to mount on anything only running one disk. Unless front end loss is the goal.
Why would you lose the front with a big piston?

[Kendog]

I am keen on a set a clip-ons.
Maybe two sets.

[Drew]

Why would you lose the front with a big piston?Large bore hydrolic cylinders displace more fluid. Get the ratio between master and slave too wrong and you end up with so little travel, exerting too much pressure, and front wheel locking up.

To put it in other terms, it reduces the feel of the lever because so little pressure goes on to apply the pads to the disk.

[F5 Dave]

Just checking. But your logic runs out a little. The increase in bore size effectively reduces the leverage, the hydraulic advantage is lessened so yes it will give little feel & the lever will move a smaller amount; but - & this is the important part; there will be considerably less power at the pads so you would have to squeeze harder to get the same effect. Like 70s brakes but with less lever travel.

[Drew]

Just checking. But your logic runs out a little. The increase in bore size effectively reduces the leverage, the hydraulic advantage is lessened so yes it will give little feel & the lever will move a smaller amount; but - & this is the important part; there will be considerably less power at the pads so you would have to squeeze harder to get the same effect. Like 70s brakes but with less lever travel.

I retort: The master in question is also radial, with a very short piston/hinge distance. More leverage than standard, plus bigger piston, equals OH FUCK.

Having said that, Clive seems to get on with the one he has OK, so without seeing what caliper he's running, my theory goes right out the window.

I'm not being argumentitive for it's own sake this time by the way. Just wanted to know if I could fit one to my RF without decreasing what effectively little brakes it has now.

[F5 Dave]

I was wondering if you would try argue your way out of it. Leverage is leverage, Radial m/cs have the advantage of less angular change through out the stroke.

Conversion from conventional to radial is something of a question but I have seen articles where they reduced the braking force of a GSXR considerably (increased the stopping distance alarmingly) by putting on a swish radial MC (they choose too big a bore, but I bet plenty have buying aftermarket without realising it).

I tend to go with braided cables & the smallest piston I can get away with. Braided lines can make some older brakes feel wooden like XJs etc as they ran large pistons to compensate for old tech rubber lines. Rubber lines have improved heaps.

Actually my RF didn't stop that bad when I put the Galfer pads & new EBC discs with a complete strip, but she was a big ol' girl. The YZF outbraked it easily with R1 bits fitted, but I did need to go to the smaller 14mm mc the R1 uses rather than the 5/8 most older twin setups use.


You could experiment with 14mm mc, but would have to fit braided lines & lever travel may still be too much with those 4 pots, my RGV brakes didn't seem to bleed up acceptably & same sort of callipers.

But getting a WOF may be difficult with non std mc. Certainly wouldn't get one at a VINZ place without a LVV cert.

[F5 Dave]

oh yeah how straight are your RF discs while we are off the subject of buckets it seems?

I skimmed 2 discs & at least one of them warped after another 6 months by which time I had new discs.

There could well be one that is fine & I'm skint so $40 to you if it is better than what you have. Beening meaning to try check them & TM them.

[Yow Ling]

halfway down this page http://www.tz350.net/tzperformance.htm is pretty detaild blurb about matching calipers to masters

[Drew]

oh yeah how straight are your RF discs while we are off the subject of buckets it seems?

I skimmed 2 discs & at least one of them warped after another 6 months by which time I had new discs.

There could well be one that is fine & I'm skint so $40 to you if it is better than what you have. Beening meaning to try check them & TM them.They run true, but are beneath minimum thickness. I have a mint pair of RF rotors on fucked carriers, and a pair of RGV complete disks that I dunno the rotor condition of already. So eventually I'll find somewhere that can button them into a good set for me.

But cheers.

Oh yeah, leverage is not the same as leverage. Piston 20mm from pivot, provides less pressure per pound per square inch of force to lever, than piston at 10mm from pivot.

Specifics Bob.

[F5 Dave]

F1 eng will button discs. I have a set of circliped buttons for my PFM rotors ex my YZF but hope to sell the discs complete.


Sorry don't understand your leverage argument. You can increase or decrease leverage by changing the fulcrum, but you can also change the hydraulic leverage. At the end of the day you are still providing mechanical advantage & there is no free power to be had.

Given that you don't want the lever to move much more than 3cm there is a limit to the leverage, hydraulic or plain mechanical of a given combination of the two. More mechanical leverage may suffer tiny amounts more friction but splitting hairs.

Reducing flex in callipers & lines means lever movement isn't wasted so one could take advantage & decrease the bore size , or indeed move the pivot point closer, for more power at the pads

incidentally old TZs apparently had worse brakes than RDs as they were flexi ally compared to a heavy lump on the RD.

Couldn't load that TZ site, but I meant conversion from conventional to radial mc. Brembos etc run 19mm for example on some setups.

Lockheed or someone had an adjustable MC, one set bore, but you could adjust the pivot to give the required leverage. clever.

[ajturbo]

I am keen on a set a clip-ons.
Maybe two sets.

planning on dicking off??? lol:girlfight:

[Henk]

planning on dicking off??? lol:girlfight:

This is buckets, did you need to ask?

[Bert]

I retort: The master in question is also radial, with a very short piston/hinge distance. More leverage than standard, plus bigger piston, equals OH FUCK.

Having said that, Clive seems to get on with the one he has OK, so without seeing what caliper he's running, my theory goes right out the window.

I'm not being argumentitive for it's own sake this time by the way. Just wanted to know if I could fit one to my RF without decreasing what effectively little brakes it has now.

Well Drew; I'm happy to put my money where my mouth is (otherwise I would not have posted in the first place) Pm me your details and I'll send you one. If it works $80 plus shipping. If not send it back (call it square) and I'll stop offering them up.

Brent.

[Kendog]

This is buckets, did you need to ask?
Exactly.

We also have two fxr front ends so might put tem on both bikes.

[Henk]

Exactly.

We also have two fxr front ends so might put tem on both bikes.

If you want to flick one off talk to me at easter

[Kickaha]

Lockheed or someone had an adjustable MC, one set bore, but you could adjust the pivot to give the required leverage. clever.

Lockheed as below, although I think Accosato and Brembo have radial M/C that can do the same
258900
258901

[Kendog]

If you want to flick one off talk to me at easter
One of the sets of clip ons, or bikes?

[Henk]

One of the sets of clip ons, or bikes?

FXR front ends, gathered you might have a spare.

[Drew]

Well Drew; I'm happy to put my money where my mouth is (otherwise I would not have posted in the first place) Pm me your details and I'll send you one. If it works $80 plus shipping. If not send it back (call it square) and I'll stop offering them up.

Brent.And that folks, is why I'll buy things off this rooster in the future. I wont waste your time on the master cylinder yet though mate, priorities have the RF mods low on the to do list.

[Kendog]

FXR front ends, gathered you might have a spare.
Ahh I see.
We don't have a spare set, the second set is on Trudi's bike.

[Ivan]

I have 2 things firstly set of forks USD as seen on my bucket thread shortened to RS125 Honda specs but need working with to get right dont wanna waste my time as I have better forks will trade them for a brake calliper?? or a rear shock out of say FXR150 etc if you have changed your one

also I havea rear shock out of chinese motox bike fully adjustable Compression and Rebound and preload adjustment will need re gasing dont know how good it works as I have never used it but reseviour hits my swing arm but I dont want to modify my frame to make it fit will trade for another shock FXR etc

[hal20308]

Crazyman and myself have been working with a few overseas suppliers for bits and pieces (consumables) for the CrazyFrames..

Clip-ons
IManaged to find a supplier for 33mm clip-ons (suitable for FXRs); we've been using the 45mm version. very nice light bars (~ same weight as the WoodCrafts).

258880

CNC 6000 series; they will work out at $125 set (plus shipping in NZ max $15). cheaper than Ebay/Trademe..
($150 for 50mm version; other sizes available if pre-ordered soon).
Before we rush off and bulk order, I'd be keen to get an idea of interest before we commit $$.


Front master-cylinders
Another thing we have had some success with
($80 with the current exchange rate)
258881
(hoping Rich/Clive/Andrew might provide some feedback here..)

Thanks Drew: three options from what I recall (I'll get the list of specs soon): 12.7mm, 14mm, 16mm

We have been using the 12.7mm version but sizes range up to 19.5mm

I'll bring a few bits along to the GP for people to look/touch/replace broken bits etc.

I'll take a 12.7mm M/C when you get some in........ at Kaitoke most meets or else can intraweb the $$$ - cheers.

[quallman1234]

I have 2 things firstly set of forks USD as seen on my bucket thread shortened to RS125 Honda specs but need working with to get right dont wanna waste my time as I have better forks will trade them for a brake calliper?? or a rear shock out of say FXR150 etc if you have changed your one

also I havea rear shock out of chinese motox bike fully adjustable Compression and Rebound and preload adjustment will need re gasing dont know how good it works as I have never used it but reseviour hits my swing arm but I dont want to modify my frame to make it fit will trade for another shock FXR etc

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

[speights_bud]

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

Choo got any slicks lying around?

[RDjase]

Choo got any slicks lying around?

Heres some

http://www.trademe.co.nz/Browse/Listing.aspx?id=452116063

[husaberg]

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

Is this an RS125 parts give away? because i will up my hand up? or is that out?

Seriously though if have you got anything for sale PM me.

[speights_bud]

I was tempted by the slicks, thinking ohh its only for buckets.... but then i read stored for 4 years and who knows how old before then?... :(

[cheesemethod]

Just picked up a MB100. Don't want to get too crazy with it yet, but does anybody know of a front end arrangement to put a better brake on it?

[koba]

Just picked up a MB100. Don't want to get too crazy with it yet, but does anybody know of a front end arrangement to put a better brake on it?

Disc or drum?
I't its a disc it should be OK if it's in working order.

EDIT: Lots of front ends can be made to fit.

[husaberg]

Just picked up a MB100. Don't want to get too crazy with it yet, but does anybody know of a front end arrangement to put a better brake on it?

You will note your specific bike is not listed but it is the std small Honda size bearing.


Disc or drum?
I't its a disc it should be OK if it's in working order.

EDIT: Lots of front ends can be made to fit.
Have a look in here half the fun is in the fitting.

The two PDF are a usefull guide to which bike has what bearing and which bike has what fork Diameter. It is quite useful for sizing up options.

[Ivan]

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

sweet man sounds good you dont have the old disk still do you or know whaqt other models bolt onto that rim until i upgrade to a 17 inch front

[husaberg]

sweet man sounds good you dont have the old disk still do you or know whaqt other models bolt onto that rim until i upgrade to a 17 inch front

er stuff like this is everywhere



I see metal gear has update its website it now has a search by size or stud spacing PCD etc function. So is perfect for cross referencing.
http://metalgear.com.au/search_by_disc_measurements.php?user1=140&user2=&user3=&user4=&user5=&user6=&user8=&search_measurements=Find+Discs

This is the one i have generally used in the past.
http://www.moto-master.com/productnow.php#

[Ivan]

er stuff like this is everywhere

this is aprilia rs50 to by the way not honda rs125

[husaberg]

this is aprilia rs50 to by the way not honda rs125

Best to look under a Aprillia section of the disk listings then?Ivan

[husaberg]

One NSR250 mc16 Frame usual stuff ie one lady owner never crashed etc etc......
incl swing-arm. Lighter and narrower than a later model one.
Perfect for a frame or WHU
A genuine Honda Frame.

Accept trades of money.
Able to include for no additional money a lot of false claims regarding its history, if you wish such as it was once part of an a bike Mick Doohan once rode past on the way to work.

Middle pic is an MC21 i think with some detail of the width of the net.
Frame is currently in CHCH.

Does not include subframe though.

[speights_bud]

One NSR250 mc16 Frame usual stuff ie one lady owner never crashed etc etc......
incl swing-arm. Lighter and narrower than a later model one.
Perfect for a frame or WHU
A genuine Honda Frame.

Accept trades of money.
Able to include for no additional money a lot of false claims regarding its history, if you wish such as it was once part of an a bike Mick Doohan once rode past on the way to work.

Middle pic is an MC21 i think with some detail of the width of the net.
Frame is currently in CHCH.

Does not include subframe though.

If it were on the northern island i'd be keen, would make a good FXR version of the NSR MC16 Loncin i've nearly finished. by the way, Mr Doohan owned the whole bike i got my frame from (True story)

[husaberg]

If it were on the northern island i'd be keen, would make a good FXR version of the NSR MC16 Loncin i've nearly finished. by the way, Mr Doohan owned the whole bike i got my frame from (True story)

I once had a car owned by John Voight.:lol:

[Dutchee]

If it were on the northern island i'd be keen, would make a good FXR version of the NSR MC16 Loncin i've nearly finished. by the way, Mr Doohan owned the whole bike i got my frame from (True story)

What if we could work out a way for it to come to the real island for a box of beers or somesuch? (i.e. not so much)?

How much room you guys heading north for the GP got in your truck/van/multi-wheeled vehicle? Reckon you could fit a spotted by mick doohan thing in? lol

[husaberg]

What if we could work out a way for it to come to the real island for a box of beers or somesuch? (i.e. not so much)?

How much room you guys heading north for the GP got in your truck/van/multi-wheeled vehicle? Reckon you could fit a spotted by mick doohan thing in? lol

Well er... never said he actually seen it only err.. drove past it......possibly

[Dutchee]

Well er... never said he actually seen it only err.. drove past it......possibly

Yeah, but he never said he didn't see it, therefore he could've seen it or driven past it (yeah, let's ignore the fact he has no idea we're on a different planet talking about him), but how much room will it take & how much room have they got? bwahahaha

[quallman1234]

Is this an RS125 parts give away? because i will up my hand up? or is that out?

Seriously though if have you got anything for sale PM me.

Aprilla RS50 caliper. ;)

RS125 Bits all i've got is a set of old 91 rims, 2.15" Front 3" Rear, i want 600$ or alternatively find me a set of cheap modern rims and you can have these cheaper! Cheapest set of new rims i can find are 1000$ hence the price.

I'll put a pair of slicks aside paddy, available after next couple of weekends. PS Still got your pit board.

Mmm yummy http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-450286741.htm

[quallman1234]

If it were on the northern island i'd be keen, would make a good FXR version of the NSR MC16 Loncin i've nearly finished. by the way, Mr Doohan owned the whole bike i got my frame from (True story)

Get someone to bring it up to taupo?

[speights_bud]

Aprilla RS50 caliper. ;)

I'll put a pair of slicks aside paddy, available after next couple of weekends. PS Still got your pit board.




Awesome bro you are the man, Feel free to modify that pit board all you like to make it work for you if you want. i'll be at the final round playing Super Awesome Quad man out there helping the poor buggers who fall off

[quallman1234]

Awesome bro you are the man, Feel free to modify that pit board all you like to make it work for you if you want. i'll be at the final round playing Super Awesome Quad man out there helping the poor buggers who fall off

Haven't touched it, theres no 22's out there!

Ahh nice bro.
I hope i don't see you.

[Pumba]

Suzuki GSF250 bandit Frame (http://www.trademe.co.nz/Browse/Listing.aspx?id=454868833)

Might be worth it for the forks.

[TZ350]

36mm Keihin
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-456276157.htm

3 x 28mm Mikuni Flat Slides
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-456274260.htm


32 Mikuni Flat Slide
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-456275459.htm

[F5 Dave]

Aprilla RS50 caliper. ;)

RS125 Bits all i've got is a set of old 91 rims, 2.15" Front 3" Rear, i want 600$ or alternatively find me a set of cheap modern rims and you can have these cheaper! Cheapest set of new rims i can find are 1000$ hence the price.

I'll put a pair of slicks aside paddy, available after next couple of weekends. PS Still got your pit board.

Mmm yummy http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-450286741.htm

um, here's a 2.5 front real cheap. Looks ok on one side. And guess who the seller is? Maybe this is one you prepared earlier???:scratch:

http://www.ebay.com/itm/Marchesini-front-wheel-Honda-RS125-Yamaha-TZ125-DAMAGED-/280837782242?pt=UK_Motorcycle_Parts&hash=item41633c7ae2

[F5 Dave]

36mm Keihin
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-456276157.htm

3 x 28mm Mikuni Flat Slides
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-456274260.htm


32 Mikuni Flat Slide
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-456275459.htm

oh well, there goes my ideas of selling a carb or two to raise some funds.

[Skunk]

oh well, there goes my ideas of selling a carb or two to raise some funds.I be looking for a matched pair of 32mm flat slides... Purchase depends on price as I'm always broke.

[RDjase]

I be looking for a matched pair of 32mm flat slides... Purchase depends on price as I'm always broke.

Might have some early VJ21 32mm, They might have gone with the bike tho. Is that what your after?

Will have a look if they are

[F5 Dave]

obviously they are quite heavily downdraft, not sure if Skunk has the manifolds or space for that.

[Skunk]

obviously they are quite heavily downdraft, not sure if Skunk has the manifolds or space for that.Dave is right. :facepalm: I have the space but they're not ideal. I have a couple of those already on standby.

[gav]

Well er... never said he actually seen it only err.. drove past it......possibly
So how much do you want for the NSR frame?

[RDjase]

Dave is right. :facepalm: I have the space but they're not ideal. I have a couple of those already on standby.

Thought so, I think ( very vaugly) I may have a pair of reverse cyl TZR250 carbs, will have a look when get into my messy shed

[husaberg]

So how much do you want for the NSR frame?

Well i paid $170 for it so offer's not exceeding $171 i guess (or below $169.99)<_<
Has the Doohan history remember:innocent:

[gav]

$170? What comes with it for that price?

[husaberg]

$170? What comes with it for that price?

As far as i am aware everything in the pic a few minus the subframe brought from the pic and picked up by a mate. I tried ringing him to confirm, Alas but he is out.

[Slingshot]

I be looking for a matched pair of 32mm flat slides... Purchase depends on price as I'm always broke.

Don't you already have a pair of flat slide carbs?

[F5 Dave]

Hey. Who are you? Didn't you used to ride motobiks, like, a long, long time ago?

[Skunk]

Don't you already have a pair of flat slide carbs?I do - they're downdraft though.
Or do you mean the 28mm pair?

[Rehab]

Sold both buckets within a few hours, VT250 wheels below plus RG250 frame and ute atill up for grabs

[sidwyz]

In the shed I have a set of VT250 wheels (no front disk, but does have rear drum and sprocket carrier) $100, and an RG250 frame with swingarm and shock for $50.


PM for details on any of the above.

I'll be back at buckets later in the year when I've sorted this money thing out.

could you pop up a couple of pics of the wheels? and what sizes are they ie: 17 x 3 ect

[Rehab]

could you pop up a couple of pics of the wheels? and what sizes are they ie: 17 x 3 ect


17 x 3 and 18 x 3.75

259654259655259656

[SHELRACING]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-455989034.htm

Here ya go I can think of a few jaffas that might need these,
:laugh: :laugh: :laugh: :rofl::rofl::rofl:

[crazy man]

Crazyman and myself have been working with a few overseas suppliers for bits and pieces (consumables) for the CrazyFrames..

Clip-ons
IManaged to find a supplier for 33mm clip-ons (suitable for FXRs); we've been using the 45mm version. very nice light bars (~ same weight as the WoodCrafts).

258880

CNC 6000 series; they will work out at $125 set (plus shipping in NZ max $15). cheaper than Ebay/Trademe..
($150 for 50mm version; other sizes available if pre-ordered soon).
Before we rush off and bulk order, I'd be keen to get an idea of interest before we commit $$.


Front master-cylinders
Another thing we have had some success with
($80 with the current exchange rate)
258881
(hoping Rich/Clive/Andrew might provide some feedback here..)

Thanks Drew: three options from what I recall (I'll get the list of specs soon): 12.7mm, 14mm, 16mm

We have been using the 12.7mm version but sizes range up to 19.5mm

I'll bring a few bits along to the GP for people to look/touch/replace broken bits etc.for anyone that are wanting clipons they will be at the gp next week

[Eddieb]

My neighbour is going to be selling a CBR150 shortly, complete running bike but a little scruffy. Most fairing panels have minor damage, needs a chain and sprockets and one clipon is a little bent I think. No WOF or rego and may require a headlight, or at least a headlight bulb I'm not sure which. It runs sweet though. It's a 2004 I think.

Realisticly what sort of money could he get for it if he advertised it as a bucket? he needs to clear as much as he can to get into a commuter bike like a XT 225 Scorpio or simliar so isn't going to let it go for a silly low ball offer, but it does need to go to fund the new commuter.

?

[Clivoris]

My neighbour is going to be selling a CBR150 shortly, complete running bike but a little scruffy. Most fairing panels have minor damage, needs a chain and sprockets and one clipon is a little bent I think. No WOF or rego and may require a headlight, or at least a headlight bulb I'm not sure which. It runs sweet though. It's a 2004 I think.

Realisticly what sort of money could he get for it if he advertised it as a bucket? he needs to clear as much as he can to get into a commuter bike like a XT 225 Scorpio or simliar so isn't going to let it go for a silly low ball offer, but it does need to go to fund the new commuter.

?

If he would prefer to replace the fairings and headlight instead of selling the bike, put him in touch with me. I have a set of mint fairings, headlights, indicators etc.. I'm always keen to buy another one though if he is keen to sell it. Clive 027 6647254.

[wildman]

Need to make room for new sidecar so selling yellow terror sidecar. Powered by standard Loncin 150 motor, go-kart rims and tyres, 35mm hollow axle, mikuni superkart vaccum fuel pump and go-kart quick change rear sprocket. Plenty of room for developement [spend more money] best way to scare your mates while having fun. I want to see the class taking off so price isonly $500 including spares, if you're interested send me a pm.

[SHELRACING]

Need to make room for new sidecar so selling yellow terror sidecar. Powered by standard Loncin 150 motor, go-kart rims and tyres, 35mm hollow axle, mikuni superkart vaccum fuel pump and go-kart quick change rear sprocket. Plenty of room for developement [spend more money] best way to scare your mates while having fun. I want to see the class taking off so price isonly $500 including spares, if you're interested send me a pm.

I don't think missus wobbler would let me buy it. But I'd be interested in looking at some pics

[kel]

FXR150 F4 (Bucket racer) race bike for sale
Bike has been dynoed at a fat 20hp (graphs available on the ESE thread)
After market cams and valve springs (only 2 meetings on these), ported head, 64mm piston (5 meetings on this), 28mm Keihin flat slide carb, custom header and muffler (mega phone exhaust also included), 12 tooth front sprocket, new 49 tooth rear sprocket and new chain, GSX250R wheel conversion with slicks, standard wheels with wets (subject to change on wheels with wets as a mate already has his eye on them), after market unbreakable footrest hangers, after market clipon bars, KX125 quick action throttle. Also comes with the following spares: complete gasket set, new fork seals, new 13 tooth front sprocket, 47 and 48 tooth rear sprockets, 6 x main jets, set of fairings with screen and whatever else that pops up that belongs to it.
Bike has been used in the first 2 rounds of the north island series with several wins and top 4 placings (leading the series after 2 rounds). Its clearly quicker than all but the very best buckets, plus there’s still scope for more power which Id be happy to discuss.
I need to sell this or Ill never finish the 2 stroke. Make an offer!

[Gigglebutton]

FXR150 F4 (Bucket racer) race bike for sale
Bike has been dynoed at a fat 20hp (graphs available on the ESE thread)
After market cams and valve springs (only 2 meetings on these), ported head, 64mm piston (5 meetings on this), 28mm Keihin flat slide carb, custom header and muffler (mega phone exhaust also included), 12 tooth front sprocket, new 49 tooth rear sprocket and new chain, GSX250R wheel conversion with slicks, standard wheels with wets (subject to change on wheels with wets as a mate already has his eye on them), after market unbreakable footrest hangers, after market clipon bars, KX125 quick action throttle. Also comes with the following spares: complete gasket set, new fork seals, new 13 tooth front sprocket, 6 x main jets, set of fairings with screen and whatever else that pops up that belongs to it.
Bike has been used in the first 2 rounds of the north island series with several wins and top 4 placings (leading the series after 2 rounds). Its clearly quicker than all but the very best buckets, plus there’s still scope for more power which Id be happy to discuss.
I need to sell this or Ill never finish the 2 stroke. Make an offer!

My motor for the wheels :psst:

[hillbillie]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-455989034.htm

Here ya go I can think of a few jaffas that might need these,
:laugh: :laugh: :laugh: :rofl::rofl::rofl:

Bahahahahaha!:laugh::killingme

[Buckets4Me]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-455989034.htm

Here ya go I can think of a few jaffas that might need these,
:laugh: :laugh: :laugh: :rofl::rofl::rofl:



I think this is more in order (only the 2 stroke boys thow)
http://www.trademe.co.nz/home-living/party-festive-supplies/kids-parties/other/auction-460080839.htm

[Captian soup]

I have 80% of a Suzuki impulse sitting out the back of my place. if anyone is interested in any parts send me a PM.
missing parts:
seat, rear wheel, air box, fairings lights ect, brakes are there but theres something seriously wrong there.. cant think of anything else.

[chrisc]

I imported them with fingers and toes crossed they will fit but they are on the slightly tight side. Funds are needed at the moment so they have to go rather than getting them altered.
Average condition, definitely been down the payment a few times but still plenty of life left in them for buckets as I was intending.
Shoulder, arm, knee etc armour.

Red and white
Suit someone between 55-65kg, 1.7m tall

Just trying to get what I paid for them so wanting $270. You can come try them on before purchasing. I live on the northern half of the North Shore.

021 157 1036

[Drew]

Suit someone between 55-65kg, 1.7m tall



I don't recall ever reading that someone on here happened to be a midget.

[F5 Dave]

Nah man don't be a prick. Japanese leathers are maybe smaller sized than our sizes, - but are generally pretty spot on for Chicks if they're petite.:love:

[cotswold]

I don't recall ever reading that someone on here happened to be a midget.

Cheeky git I raced at 9 stone 12 which is around 63kg and I ain't no midget!

[F5 Dave]

Don't you just love this emicon :love: Its like he's eyeing up some hot chick in some tight leathers looking her up & down. Couldn't have planned that one better.

[speights_bud]

Bugger, too big for my Wifey, she's only 52kg's and 1.52m tall.:facepalm:

[F5 Dave]

So its like: Hey Babe, how 'bout we spice things up in the bedroom a little?

. . . Hmm, what kind of sick outfit this time you pervert? The Sheep again?


We can do the Sheep again?:woohoo: ok forget the leathers.

[bozz]

Hi,

Got mine for sale:

http://www.trademe.co.nz/Browse/List...547278&ed=true

bike is in Upper Hutt (about 5-10mins from Kaitoke)

Had a lot of fun and wish I could stay around but we're moving abroad.

Cheers,
Elwin

[kiwifruit]

Wanting to buy a carb to suit a GP125. Anyone got a stock one or something else that fits?

[husaberg]

Wanting to buy a carb to suit a GP125. Anyone got a stock one or something else that fits?

Try TZ350 i sure doubt he wouldn't not have one.;)

[cotswold]

Wanting to buy a carb to suit a GP125. Anyone got a stock one or something else that fits?

I have a standard one you can have for postage, it will need to be stripped and cleaned tho

[kiwifruit]

I have a standard one you can have for postage, it will need to be stripped and cleaned tho

Sweet! Thanks

[cheesemethod]

Anybody want an MB100? I bought it as a project, but would rather just get a ready to race bike. PM me here or 021 212 6042

[Mark16]

Hey guys, my fxr 150 bucket racer is for sale, I have used it once at Te Puke and most people seem to know who's bike it originally was, I cant remember unfortunately. I payed $1600 for it and have since bought a set of 250 rims with slicks for $600. At the moment the right hand foot bracket is broken but I am looking for a spare. Will sell bike and spare rims for $1600 if you want photos or more info text or ring me 0276987277 I dont get on here much so may be quicker to text. Selling as it looks like I may be moving with work and dont get to use it much as it is. Not on trade me yet. Cheers

[ajturbo]

Hey guys, my fxr 150 bucket racer is for sale, I have used it once at Te Puke and most people seem to know who's bike it originally was, I cant remember unfortunately. I payed $1600 for it and have since bought a set of 250 rims with slicks for $600. At the moment the right hand foot bracket is broken but I am looking for a spare. Will sell bike and spare rims for $1600 if you want photos or more info text or ring me 0276987277 I dont get on here much so may be quicker to text. Selling as it looks like I may be moving with work and dont get to use it much as it is. Not on trade me yet. Cheers

Any one keen to bring it south?

[cotswold]

Sweet! Thanks

Did it turn up ok?

[kiwifruit]

Did it turn up ok?

Sure did, thank you :D

[Dutchee]

Hey guys, my fxr 150 bucket racer is for sale, I have used it once at Te Puke and most people seem to know who's bike it originally was, I cant remember unfortunately. I payed $1600 for it and have since bought a set of 250 rims with slicks for $600. At the moment the right hand foot bracket is broken but I am looking for a spare. Will sell bike and spare rims for $1600 if you want photos or more info text or ring me 0276987277 I dont get on here much so may be quicker to text. Selling as it looks like I may be moving with work and dont get to use it much as it is. Not on trade me yet. Cheers
The person whose name Mark can't recall, is Max Lyver (of Max & Andi fame, from Hawkes Bay). Definitely sounds a great deal.

[husaberg]

I have a contact oversea who has some surplus Honda RS125 bits
All of them are for '89 and '90 nf4 models :
Frame
Swingarm with rear wheel axle
complete front end (yokes, clipons, master cylinder, axle etc.)
Front and rear aluminum wheels
Front and Rear brake calipers
Front and rear disk brakes


Don't get too excited though as the freight may be a killer for the larger bits.

He also requires the following bits to complete his build.
Stock carb manifold and maybe a carb as well as his is not in great condition.
Complete clocks (temp gauge and tacho).
Clutch & throttle cables
Carb shield.

[kel]

I have a contact oversea who has some surplus Honda RS125 bits
All of them are for '89 and '90 nf4 models :
Frame
Swingarm with rear wheel axle
complete front end (yokes, clipons, master cylinder, axle etc.)
Front and rear aluminum wheels
Front and Rear brake calipers
Front and rear disk brakes


Is it Pierre Billiet? He's selling a bunch of NF4 parts, 420 euros + shipping for the forks and yokes :shit:

[husaberg]

Is it Pierre Billiet? He's selling a bunch of NF4 parts, 420 euros + shipping for the forks and yokes :shit:


No def not a frog.

[Bert]

trademe bits:
here's a frame:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-467060142.htm
shock:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-468036668.htm
forks:love:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-467314413.htm

[Rick 52]

XL 100 F5 bike ??
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-467570515.htm

[wayneuys]

does anyone have and want to sell zxr250c fairings if so please let me know either reply to my post or emailme at wayneuys@yahoo.co.uk or txt me on 0211189714

thanks
wayne