Bucket bits 4 sale

[Bert]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-517371038.htm

mighty TF125. cheep thrills.

[richban]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-517371038.htm

mighty TF125. cheep thrills.



Shit for some reason I nearly bid on it. Thank god the coffee is working now. I do like it for some reason. Bargain.

[Rick 52]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-517123653.htm

Mx transponder
I think this is the type we use at Mt Wellington !

[RDjase]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-517123653.htm

Mx transponder
I think this is the type we use at Mt Wellington !

Trans X 160 ?

Thats what they use in karting too. Wonder if the system for a 260 is the same but they only will work at a slower speed

[Pumba]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-517123653.htm

Mx transponder
I think this is the type we use at Mt Wellington !

Oi you bugger off. He has slowly been droping his price over the last month. I am hoping he keeps going (although I suspect he may be at the bottom) then I might be able to afford it

[Dutchee]

Impulse wheel front $50 - must pick up, Wellywood
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-518770068.htm

[Bert]

H100 motor
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-518922418.htm

[F5 Dave]

excuse: "Never tried to get this motor going as it is to small for my bike frames i have" What? that is as lame as I inherited off my great aunt Myrtle & has been a family heirloom for several generations blah blah. . .

[speights_bud]

Does anyone want an RG150 frame? Make me an offer... beer and whiskey considered...

What u see is what u get, can't be arsed putting it on tardme and its not really worth the hassle of shipping, might be able to arrange to get to manfeild next winter round, prob cost beer to get someone to deliver for me. got a couple of 'lectrickery things on it still, but not full loom or power-valve gear or anything. no rear shock, think the linkages are there tho.

gettin rid of shit.

Anyone need MC16 NSR electrics or anything like that let me know, engine went to F3 bike and Chassis/swingarm went to my bucket. Full set of good cond original fairings but might have ahome for those already270986

[boostin]

Anyone want my RGV250 frame? Still sitting in the shed.

http://www.kiwibiker.co.nz/forums/showthread.php/73540-Bucket-bits-4-sale?p=1130253461#post1130253461

$100.

[boostin]

Suzuki GT125 twin.

Never tried to get it running. Got it home and pulled the barrels off, then put it back together and under the bench. Person I bought it off about 3 years ago said it ran.

$100

270987270988270989

[gav]

Anyone want my RGV250 frame? Still sitting in the shed.

http://www.kiwibiker.co.nz/forums/showthread.php/73540-Bucket-bits-4-sale?p=1130253461#post1130253461

$100.
Does it have the rear shock? Any idea how much to get to Chch?

[NickMcDonald]

Suzuki GT125 twin.

Never tried to get it running. Got it home and pulled the barrels off, then put it back together and under the bench. Person I bought it off about 3 years ago said it ran.

$100

270987270988270989

Mine! PM's sent. Or get at me on 021 1334 605. Cheers!

[chrisc]

FXR in auckland

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-520696506.htm

[gav]

Mint Suzuki RG50

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-518816163.htm

[mossy1200]

Im thinking of selling mine and building another one. I hate it when I get a stupid idea.

Im thinking I might be better off letting a beginner use my bike on race days and just maintain it for them.

Has anyone got a future talent that needs a bike to start out on?

[crazy man]

Im thinking of selling mine and building another one. I hate it when I get a stupid idea.

Im thinking I might be better off letting a beginner use my bike on race days and just maintain it for them.

Has anyone got a future talent that needs a bike to start out on?but you were going to blow the lap record away on that bike

[mossy1200]

but you were going to blow the lap record away on that bike

Only in my dreams.
Idd be as happy watching it run and doing some marsheling also.

[crazy man]

Only in my dreams.
Idd be as happy watching it run and doing some marsheling also.l was geting my honda 125 going to have some good dicing with ya . its one of the oldest buckets ever built

[husaberg]

Has anyone got a future talent that needs a bike to start out on?

I would like to think i might, have some future talent, because i sure ain't been displaying much thus far,<_<

Make it a 100 and get sketchy to build you a supercharger slap on a efi and intercooler come on.....
You know you want to.....

[mossy1200]

l was geting my honda 125 going to have some good dicing with ya . its one of the oldest buckets ever built

Its not the bike. Ill still race it but if theres someone wants a run whoes starting out that would be just as good.

[crazy man]

I would like to think i might, have some future talent, because i sure ain't been displaying much thus far,<_<

Make it a 100 and get sketchy to build you a supercharger slap on a efi and intercooler come on.....
You know you want to.....dont give him any more ideas

[Drew]

Im thinking of selling mine and building another one. I hate it when I get a stupid idea.

Im thinking I might be better off letting a beginner use my bike on race days and just maintain it for them.

Has anyone got a future talent that needs a bike to start out on?
Got a daughter who could use a reliable bike, than a two stroke I built.

[mossy1200]

Got a daughter who could use a reliable bike, than a two stroke I built.

PM me drew we will orginise for next round.
If im on call that weekend I may need leave the track a few times during the day.
Missing callouts is costly but you could keep the team going if im called out.

[Clivoris]

Got a daughter who could use a reliable bike, than a two stroke I built.

Yeah man. Lets get all our daughters out there.

[Drew]

PM me drew we will orginise for next round.
If im on call that weekend I may need leave the track a few times during the day.
Missing callouts is costly but you could keep the team going if im called out.


Yeah man. Lets get all our daughters out there.
Oh right, I expected clever comments about breeding crashers.

I'll talk to her and make sure she is still keen, and get hold of ya Steve. Cheers bro.


Clive, I think you're a brave man signing up to fund two girls racing.

[chrisc]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-520892517.htm

And a GS125 bucket
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-521136577.htm

[Pumba]

And a GS125 bucket
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-521136577.htm

And the Banana is for sale again

[bartshumandad]

And the Banana is for sale again

This machine has done so much for so many people starting bucket racing it should be gold plated, mounted and used as a trophy! (Only if someone pays for it though, can't afford to donate it).

I have lost count of the number of people who have told me they used to own it.

Believe it or not, I have discovered that a friend of mine did the initial build back in the 90's. He got all nostaligic when he visited a few months back.

Come on, if you have owned if before, 'fess up here!

[timg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=521455462</SPAN> (http://www.trademe.co.nz/Browse/Listing.aspx?id=521455462)</SPAN>
http://www.trademe.co.nz/Browse/Listing.aspx?id=521459163</SPAN> (http://www.trademe.co.nz/Browse/Listing.aspx?id=521459163)</SPAN>
http://www.trademe.co.nz/Browse/Listing.aspx?id=521460846</SPAN> (http://www.trademe.co.nz/Browse/Listing.aspx?id=521460846)</SPAN>
http://www.trademe.co.nz/Browse/Listing.aspx?id=521467016</SPAN> (http://www.trademe.co.nz/Browse/Listing.aspx?id=521467016)</SPAN>
http://www.trademe.co.nz/Browse/Listing.aspx?id=521479593</SPAN> (http://www.trademe.co.nz/Browse/Listing.aspx?id=521479593)</SPAN>

[Rick 52]

Sidecar project me thinks
http://www.trademe.co.nz/motors/specialist-cars/gokarts/auction-520544944.htm

[Pumba]

Never owned it, probably more down to timing as Steve and Ellen still didn't want to sell at that point.

But it was the first bucket I ever rode, and the first road bike I ever fell off (anti clockwise lost the front in the infield). Had never crash started a bike before that off, but as the banana had stalled I had little choice but to learn, I nailed it an did another 20 laps or so before the end of the session.

I was hooked.

[timg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=521888448

[CHOPPA]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-522781202.htm

[bartshumandad]

The "Banana" is still for sale - cheap and reliable entry to the sport.

http://www.trademe.co.nz/Browse/Listing.aspx?id=523446810

In case you are wondering about it's handling given it's nickname "the banana", that came about when the second owner (Pongo) a decade or more ago, who worked at a well known hire company, painted the whole thing bright yellow. Having been around the Auckland scene for so long, this bike is pretty well sorted and capable of being punted well up the B grade field, much to the frustration of the odd FXR punters.

[Shorty_925]

RG50 someone: http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-524444292.htm

[F5 Dave]

Ahh, Chris Sales old bike. Someone in Welly buy this & lets make a race of it. Its fast. Disappeared up to Masterton & wobbled around on once or twice & not seen for years.

[gav]

RG50 someone: http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-524444292.htm

Completely rebuilt frame to fit 19" back wheel;

That's gotta be a typo? 19" ? Have they just cut the rim off and welded another wider one in place?

[gav]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-523321665.htm

[gav]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-523420880.htm

[F5 Dave]

Completely rebuilt frame to fit 19" back wheel;

That's gotta be a typo? 19" ? Have they just cut the rim off and welded another wider one in place?

yeah should be 17 of course. He did a few (Chris original owner) at his work, but was std fare for RGs, cut a TZR wheel rim out & bam the rim on the RG wheel.

thus fit straight in, same brakes, spacers, lightweight cushdrive. Just need a skilled welder as they can easily go oval if you don't know what you are doing.


Further silliness: Completely rebuilt frame to fit 19" back wheel. Of course the frame wasn't touched for that reason, plenty of others for losing weight though.

Also - fuel pump? Naaah.

[Sketchy_Racer]

I've got my eye on it dave

[Bert]

I've got my eye on it dave

:yes: your not the only one.:innocent:

[F5 Dave]

Sweet! :woohoo:

[motorbyclist]

http://www.kiwibiker.co.nz/forums/showthread.php/153852-Bucket-sidecar-rolling-chassis

[mossy1200]

Im looking at perhaps selling my bucket or swapping it for a trials bike and building another bucket project later.

PM me if anyone you know is after one.

It owes me a bit but I expect its worth whatever I get.

http://www.trademe.co.nz/Browse/Listing.aspx?id=527324997&ed=true

[husaberg]

There is also a 2.5x17 Honda one TM somewhere as well xl250 i think.
The older cantalever XT250's were 2.15x17 as well. i guess quite a few were in the 80's plus quite a few later adventure slyle big trailies as well
http://images.trademe.co.nz/photoserver/tq/79/235013379.jpg
http://www.trademe.co.nz/a.aspx?id=525556768

add one of these if your flush.... otherwise run 2 fronts.
http://images.trademe.co.nz/photoserver/thumb/44/218157444.jpg
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-526624359.htm

[F5 Dave]

or the $149 type you get on Torpedo7. They aren't 100% round, good enough for a wet on a bucket or a Motard.

[Drew]

or the $149 type you get on Torpedo7. They aren't 100% round, good enough for a wet on a bucket or a Motard.Twice you've said it now, I can hold my tongue no longer.

A wheel gets round when you lace it, it can be perfect in the box with no hub, but an amateur assembly will see it ready for clown bikes.

[Kickaha]

A wheel gets round when you lace it

If the rim isn't right no amount of fucking around lacing it will make it round

[Drew]

If the rim isn't right no amount of fucking around lacing it will make it round
If the spokes are evenly spaced, then it can be made round.

I can't lace a wheel, but the good folk at the bike shop sorted that shit in no time!

[Kickaha]

If the spokes are evenly spaced, then it can be made round.
I better give you the number for the guy down here whose been doing it for about ninety years so you can put him right then

If it can be round then there was fuck all wrong with it to start with

[husaberg]

If the spokes are evenly spaced, then it can be made round.

I can't lace a wheel, but the good folk at the bike shop sorted that shit in no time!



Got home at 10 & decided to make a captive spacer for the front wheel & then another for the spoked hub for the wet wheel. All went well so as therapy I laced the rim & got it to within 5mm of straight & tried it in the forks to see how much it has to come over. 12:30 by then so to bed to be finished later.
Er... but Dave can lace a wheel. ps nothing is ever perfectly round.

I have a Cb350 cams bike some where that has CB250RS rims on it when it was lace up by the previous owner he i guess never noticed they were drilled slightly different spoke patterns each spoke is slightly bent near the rim. Honda used 32 spokes a lot from the late 80's on the MX bikes too.
A lot of 65 and 85 MX bike have other numbers the KX85 is 32 front and 28 rear for instance. I had a pair of wheels i was going to use for the light weight hubs but had a coronary when i priced the Sun rims to suit these........

[Drew]

I better give you the number for the guy down here whose been doing it for about ninety years so you can put him right then

If it can be round then there was fuck all wrong with it to start with


Er... but Dave can lace a wheel. ps nothing is ever perfectly round

OK OK, it can't be perfect. But it needs to be pretty fuckin bad before someone who knows their shit can't make it useable.

I welded the rear wheel on my daughters bike back together after it broke, and it runs true enough for all intent and purpose.

[Muzzab]

Er... but Dave can lace a wheel. ps nothing is ever perfectly round.

I have a Cb350 cams bike some where that has CB250RS rims on it when it was lace up by the previous owner he i guess never noticed they were drilled slightly different spoke patterns each spoke is slightly bent near the rim. Honda used 32 spokes a lot from the late 80's on the MX bikes too.
A lot of 65 and 85 MX bike have other numbers the KX85 is 32 front and 28 rear for instance. I had a pair of wheels i was going to use for the light weight hubs but had a coronary when i priced the Sun rims to suit these........

So you haven't found the Honda yet then?

[husaberg]

So you haven't found the Honda yet then?

No my father told me who has a lone of it at present. but the name meant nothing to me.
I should actually make inquiries into getting it back.Before it is lent out again.
I lent it to skeater (Colin) he lent it Russy (phil) for a while.I think the guy who has now does fly in and out to Aussie.
I brought it off Bruce Wearing but in fairness used to borrow it quite a bit before then.

[Grumph]

No my father told me who has a lone of it at present. but the name meant nothing to me.
I should actually make inquiries into getting it back.Before it is lent out again.
I lent it to skeater (Colin) he lent it Russy (phil) for a while.I think the guy who has now does fly in and out to Aussie.
I brought it off Bruce Wearing but in fairness used to borrow it quite a bit before then.

I wouldn't worry about it - the crank will be fucked by now. Talked to a guy here today who is about to split the tenth crank in search of a usable one....

[husaberg]

I wouldn't worry about it - the crank will be fucked by now. Talked to a guy here today who is about to split the tenth crank in search of a usable one....

I have a new set of rollers (i think) plus 1 spare crank which is also f-ed. but on all ten cranks the hardening will be gone i guess.
Always wondered why someone does cut out the built in crank pin and make them rebuildable.

From what i remember though the crank wheels are mighty hard.....

[mossy1200]

50 watchers and 1 bid. Must be you guys watching.

[crazy man]

50 watchers and 1 bid. Must be you guys watching.me 1 he he . thinking what to ask you on there lol 300 buynow ? lol

[mossy1200]

me 1 he he . thinking what to ask you on there lol 300 buynow ? lol


Is that a legit offer?

[husaberg]

Sorry one of them is not me.
This is on my watch list though.
http://www.trademe.co.nz/Browse/Listing.aspx?id=526348306
UNIVERSAL DIGITAL GEAR INDICATOR
http://images.trademe.co.nz/photoserver/tq/85/231106085.jpg
PRODUCT FEATURES:

* Shows current gear number
* Display can be mounted anywhere
* Red illuminated display will automatically dim at night
* Compatible with all motorcycles, fourwheelers, dirtbikes, etc - will fit anything with a shift lever
* Indicates current gear from 1 to a max. of 6, as well as a neutral indicator
* Detects the current gear faster than other gear indicators that use a speedometer/tachometer signal
* Made from the highest quality materials

[quallman1234]

Hey guys, i have a CBR250R (87 double disc but has only one disc) rolling chassis for sale. PM me with offers.
Wellington.

Well its a mates. I would buy it myself but have barely ridden my bike yet in the FXR chassis so no point!

[chrisc]

FXR in Auckland

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-525331786.htm

[chrisc]

Slicks
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/tyres/auction-528939906.htm

FXR Rear Wheel
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/tyres/auction-528940606.htm

[mossy1200]

http://www.trademe.co.nz/a.asp?id=527324997

[Muzzab]

http://www.trademe.co.nz/a.asp?id=527324997

Fark, what did that muffler cost again :shit:

[mossy1200]

Fark, what did that muffler cost again :shit:

250 used once and now run in.:not:

[timg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=530604661
http://www.trademe.co.nz/Browse/Listing.aspx?id=530600215
http://www.trademe.co.nz/Browse/Listing.aspx?id=530597727
http://www.trademe.co.nz/Browse/Listing.aspx?id=530601843
http://www.trademe.co.nz/Browse/Listing.aspx?id=529050521
http://www.trademe.co.nz/Browse/Listing.aspx?id=530582877
http://www.trademe.co.nz/Browse/Listing.aspx?id=530603310
http://www.trademe.co.nz/Browse/Listing.aspx?id=530582873

[NOID]

just got my fxr back from my brother after 4years of use/sitting in his shed after he low sided it for me.

MR :Police: is also wanting a Licence for my toys :no: . So Fix up FXR it is :laugh:

Now i know we all have thrown away mirrors in the past but i need some , both of mine are gone.

Check ya sheds and let me know.

[Henk]

just got my fxr back from my brother after 4years of use/sitting in his shed after he low sided it for me.

MR :Police: is also wanting a Licence for my toys :no: . So Fix up FXR it is :laugh:

Now i know we all have thrown away mirrors in the past but i need some , both of mine are gone.

Check ya sheds and let me know.

I know I have one, that's enough for a warrant I think. Where are you based these days? Can probably throw it at NZ post on Saturday.

[chrisc]

Shit, someone is going to get a bargain. I'd be all over this but I'm no where near Christchurch so good luck in the squabble that is about to commence.
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-530111606.htm

And another FXR is auckland:
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-530834400.htm

[NOID]

I know I have one, that's enough for a warrant I think. Where are you based these days? Can probably throw it at NZ post on Saturday.

Thanks dude but have since found some. will let you know if i need anything else

[Str8 Jacket]

just got my fxr back from my brother after 4years of use/sitting in his shed after he low sided it for me.

MR :Police: is also wanting a Licence for my toys :no: . So Fix up FXR it is :laugh:

Now i know we all have thrown away mirrors in the past but i need some , both of mine are gone.

Check ya sheds and let me know.

I have just completely stripped my FXR naked and have saved all the road parts so if you want them let me know.....

[mossy1200]

http://www.trademe.co.nz/Browse/Listing.aspx?ed=true&id=531579074

1 grand reserve.

Thats less than the front end owes me.

[Bert]

FXR shock:

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-532636406.htm

[Ray LeCheminant]

Does a WHOLE BIKE count as part :laugh:
http://www.kiwibiker.co.nz/forums/showpost.php?p=1130434253

[Pumba]

Hmmm, Tim on a 2 Stroke. Not sure what to think of that.

http://www.trademe.co.nz/Browse/Listing.aspx?id=534868031

[Rick 52]

Hmmm, Tim on a 2 Stroke. Not sure what to think of that.

http://www.trademe.co.nz/Browse/Listing.aspx?id=534868031

Give F5 the hurry up ...this is a very good bike for sale

[chrisc]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-535084900.htm

[Dutchee]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-535084900.htm
freight on that is a killer. who's heading south next and wonder if Stu would hold it till then lol

Rick, is Tim coming into F5 with us? can see you and Henk claiming the 100s next season. then again, hope Tracey has enough fun this weekend to keep at it. will was saying it is now mum's bike hehehehe

[Pumba]

Rick, is Tim coming into F5 with us?

I thought he was talking about F5Dave, but your thing makes more sense now I really think about it

[Rick 52]

Rick, is Tim coming into F5 with us?

Sure is, I have seen the great little bike in his garage..

[F5 Dave]

Well I'm certainly not buying any Coal burner, just to remove any doubt.

[husaberg]

Well I'm certainly not buying any Coal burner, just to remove any doubt.

I guesed it wouldn't be anywhere near Honda (...oh sorry " ̶N̶o̶n̶ Honda")for you anyway Dave.............:wait:

[timg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=537001654

Looking for a cheapish FXR, CBR or similar I can drag out for a play occasionally with no dramas. Cheers.

[quallman1234]

My mate is looking for a competitive engine (4 stroke) for his MC17 frame....

FXR150 or CBR150 are basically the options. Anyone got any ideas?

Anyone got anything for sale.. He has a budget of a grand for a engine now.

[timg]

My mate is looking for a competitive engine (4 stroke) for his MC17 frame....

FXR150 or CBR150 are basically the options. Anyone got any ideas?

Anyone got anything for sale.. He has a budget of a grand for a engine now.

http://www.ebay.com/itm/Honda-CBR150R-Complete-Motor-From-Thailand-/121023808454?_trksid=p2047675.l2557&ssPageName=STRK:MEWAX:IT&nma=true&si=zgNt2v8H50Csael9z03qUjkX29s%3D&orig_cvip=true&rt=nc

[quallman1234]

http://www.ebay.com/itm/Honda-CBR150R-Complete-Motor-From-Thailand-/121023808454?_trksid=p2047675.l2557&ssPageName=STRK:MEWAX:IT&nma=true&si=zgNt2v8H50Csael9z03qUjkX29s%3D&orig_cvip=true&rt=nc

Cheers for that ill ask if he would ship. Would be a good deal if he will...

Alternatively a loncin/GL145 (I hear they are the same) although my mate seems to be avioding them a bit as they only have a 2 valve head and tend not to be able make the same sort of power as a semi-hotted FXR.
Does anyone know if you can get 4 valve heads for the loncins ? Are they pretty much the same engine as every other 150 chinese engine?

[husaberg]

My mate is looking for a competitive engine (4 stroke) for his MC17 frame....

FXR150 or CBR150 are basically the options. Anyone got any ideas?

Anyone got anything for sale.. He has a budget of a grand for a engine now.

http://www.kiwibiker.co.nz/forums/showthread.php/150443-2-stroke-engines-from-Thailand

I guess he might help as well with the diesels maybe

[Pumba]

Putting this on here on behalf of a mate, he has two FXR's in his shed that he is wanting to move. I haven't had a chance to get round there and have a look at them and see what the current state of them is but both bikes have been run regularly at Mt Wellington before he broke his collar bone a couple of years back.

One is No. 67 Murrey & Zacks old bike, and the other is 22 is original FXR. I think he is wanting $1000 each.

PM me and I will pass on his details if you are interested.

[husaberg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=537001654

Looking for a cheapish FXR, CBR or similar I can drag out for a play occasionally with no dramas. Cheers.

My mate is looking for a competitive engine (4 stroke) for his MC17 frame....

FXR150 or CBR150 are basically the options. Anyone got any ideas?

Anyone got anything for sale.. He has a budget of a grand for a engine now.


Putting this on here on behalf of a mate, he has two FXR's in his shed that he is wanting to move. I haven't had a chance to get round there and have a look at them and see what the current state of them is but both bikes have been run regularly at Mt Wellington before he broke his collar bone a couple of years back.

One is No. 67 Murrey & Zacks old bike, and the other is 22 is original FXR. I think he is wanting $1000 each.

PM me and I will pass on his details if you are interested.

I will wave my er usual fee of a chocolate fishy

[timg]

I will wave my er usual fee of a chocolate fishy Buy my CB250RS so I can buy a FXR and I'll chuck you a box of chockie fish:niceone:

[husaberg]

Buy my CB250RS so I can buy a FXR and I'll chuck you a box of chockie fish:niceone:

If its to small for Muzza i might struggle......i did have a look and it does look Hondalicious though.....

[timg]

If its to small for Muzza i might struggle......i did have a look and it does look Hondalicious though..... Nah, that was just the moths in Muzza's wallet talking :msn-wink: Ya know what accountants are like...

[husaberg]

Nah, that was just the moths in Muzza's wallet talking :msn-wink: Ya know what accountants are like...

I don't know he can be extremely generous to me,er.... every two weeks aye Muzza.
note he may be paying me to say that

[quallman1234]

I will wave my er usual fee of a chocolate fishy

Excellent. PM Sent.

[Muzzab]

Nah, that was just the moths in Muzza's wallet talking :msn-wink: Ya know what accountants are like...

:facepalm: you forgot to mention poor with four hungry children.....and a crop in the field.......

[crazy man]

wish someone just had a fxr motor they could sell me for a good price

[husaberg]

http://www.kiwibiker.co.nz/forums/showthread.php/150443-2-stroke-engines-from-Thailand

I guess he might help as well with the diesels maybe


wish someone just had a fxr motor they could sell me for a good price

question for you on ESE thread Scott.
I will again wave the choc fish

[NOID]

wish someone just had a fxr motor they could sell me for a good price

I have 1 :shutup:

you can buy it, team GPR spec it, then sell it back to me for the same price :yes:

[crazy man]

I have 1 :shutup:

you can buy it, team GPR spec it, then sell it back to me for the same price :yes:is it the engine or the hole:scooter: bike

[Drew]

is it the engine or the hole:scooter: bikeI think you have to be a lisenced brothel to sell "hole", dontcha?

[Dutchee]

question for you on ESE thread Scott.
I will again wave the choc fish

You're waving a lot of chocolate fish. You should eat them instead, saves getting your hands dirty. Or are you meaning waiving the chocolate fish?

[husaberg]

You're waving a lot of chocolate fish. You should eat them instead, saves getting your hands dirty. Or are you meaning waiving the chocolate fish?

Well Mr. grammar. I can say in my defense the fishies do swim in the ocean:wings:

[Dutchee]

Well Mr. grammar. I can say in my defense the fishies do swim in the ocean:wings:

who you calling mr? And it was more spelling, rather than grammatical. I just thought you might like to know why you've got sticky fingers (this time) ;):love:

[chrisc]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-539241076.htm

[Pumba]

Suzuki RG50 1988 (http://www.trademe.co.nz/Browse/Listing.aspx?id=535951031)

2 x Honda CB100 1974 (http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-539184840.htm)

Yoshimura Muffler GSXR750 (http://www.trademe.co.nz/Browse/Listing.aspx?id=537711295)

[richban]

Selling my old FXR frame and forks. I did the fork seals not long ago and they always worked well. $120 frame forks and tank. Also must have some rear sets lying around somwhere. 25 bucks each if I have them. Also have a set of mint NSR MC21 front breaks (complete) 150 for them and I will chuck in 2 rota's. Box of muknui TM 28 bits 2 incomplete carbs and some jets and needles. PM me if you want or need anything. Chur.

TANK SOLD.

[Steven T]

anyone got a rgv150 engine lying around for sale?

[Yow Ling]

anyone got a rgv150 engine lying around for sale?

whats wrong with yours?

[ac3_snow]

Some one has a cheap bucket for sale,

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-542256396.htm

cb125 single, $250 ono

[BOGAN02]

Gday ive got an AX100 up for grabs. has been taken down to basics. hit me up if anyones keen on it.

[javawocky]

Mmm, look what showed up in my Tardme Watch list, nice 'n cheap for those who are quick...

http://www.trademe.co.nz/a.aspx?id=547030710

[koba]

Mmm, look what showed up in my Tardme Watch list, nice 'n cheap for those who are quick...

http://www.trademe.co.nz/a.aspx?id=547030710

Bargain!

Ten Characters

[Drew]

Bargain!

Ten CharactersI'm trying to talk a friggin scotsman into it right now.

[koba]

I'm trying to talk a friggin scotsman into it right now.

He'd be so stupid not to!

[husaberg]

MB5 could be a cheap gearbox

http://www.trademe.co.nz/a.aspx?id=548517421

[Bren_chch]

Pictures and Stuff HERE (http://www.motorbikeparts.co.nz/product_details.php?category_id=10&sub_category_id=21&product_id=850)

cheers

[Jubba]

Havent got time to race any more so gona make some room.number 37 from auckland rounds needs new clutch handle and left bar well upside down right.rear slick has a slash but hav a brand new one which will come with as well as two fronts.had a but of a bin last round but needs bugger all to get back out there prob 70 bucks max.cant put photos on sorry as only have my phone not a computer but ill try gt it up somewhere.$900 ono
021992808

[NOID]

Havent got time to race any more so gona make some room.number 37 from auckland rounds needs new clutch handle and left bar well upside down right.rear slick has a slash but hav a brand new one which will come with as well as two fronts.had a but of a bin last round but needs bugger all to get back out there prob 70 bucks max.cant put photos on sorry as only have my phone not a computer but ill try gt it up somewhere.$900 ono
021992808

SOLD TO ME !!!!! :msn-wink:

[crazy man]

SOLD TO ME !!!!! :msn-wink:

nooooooooooooo!!!!

[NOID]

will end up in your shed anyways !!! lol


tzr150 it is !!! keepn it 4T !! almost went 2T

[koba]

will end up in your shed anyways !!! lol


tzr150 it is !!! keepn it slow and crap !! almost went 2T

Each to their own...

[chrisc]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-552600664.htm

[seymour14]

http://www.trademe.co.nz/Browse/PositionTrack.aspx?pos=21&sn=111-194&sci=53353001&r=L21vdG9ycy9tb3RvcmJpa2VzL21vdG9yYmlrZXMvb3RoZXIv YXVjdGlvbi01NTUxMzIxMTEuaHRt

Here's a potential racer. (laughed at the list of "repairs", costs more then the bike was worth second hand as a minter!). :killingme

[crazy man]

http://www.trademe.co.nz/Browse/PositionTrack.aspx?pos=21&sn=111-194&sci=53353001&r=L21vdG9ycy9tb3RvcmJpa2VzL21vdG9yYmlrZXMvb3RoZXIv YXVjdGlvbi01NTUxMzIxMTEuaHRt

Here's a potential racer. (laughed at the list of "repairs", costs more then the bike was worth second hand as a minter!). :killingmeand why would u post that here when l might buy it...thanks bro

[koba]

and why would u post that here when l might buy it...thanks bro

I think that was part of the idea, I won't bid on it now.

[NOID]

watch out crazy man.

i might snap this one up !!! better act fast and bid !!

[Billy]

Frame and swing arm,With triple clamps bored out to 35mm and fitted with RG150 forks and front brake,Rear brakes are still there but need an overhaul,Rear sets etc,Tank and 2004 tail. $350.00

2 sets of wheels,Both rears have disc's but no front disc's,$500 per pair

[kel]

Frame and swing arm,With triple clamps bored out to 35mm and fitted with RG150 forks and front brake,Rear brakes are still there but need an overhaul,Rear sets etc,Tank and 2004 tail. $350.00

Billy, pm sent.

[husaberg]

Billy, pm sent.

Back up PM sent as well (you never Know kel might not make it though the night):2guns:

[kel]

Back up PM sent as well (you never Know kel might not make it though the night):2guns:
Thanks for your concern husa but I should be all right, cleared it with the wife first :laugh:

[husaberg]

Thanks for your concern husa but I should be all right, cleared it with the wife first :laugh:

Not the wife the rest of KB<_<

[Billy]

Billy, pm sent.


Back up PM sent as well (you never Know kel might not make it though the night):2guns:

Sorry guys,Koba beat you all to it,Just have 1 pair of wheels left now

[Drew]

Sorry guys,Koba beat you all to it,Just have 1 pair of wheels left now

Did you buy that motor from me for nothing bro?

[koba]

Thanks for your concern husa but I should be all right, cleared it with the wife first :laugh:

I didn't :facepalm:

[kel]

I didn't :facepalm:

Then you should do the honourable thing and allow me to take the RS. Getting clearance from the wife cost me at least half an hour (and a RS chassis :facepalm:)

[koba]

Then you should do the honourable thing and allow me to take the RS. Getting clearance from the wife cost me at least half an hour (and a RS chassis :facepalm:)

It could cost me my lodgings and testicles. :shit:

[NOID]

it could cost me my lodgings and testicles. :shit:

but you have an rs !!!

(so worth it)

[husaberg]

but you have an rs !!!

(so worth it)

Come on its worth it just for the angry sex.

[koba]

Sex.

hmm, might not get any for a while.

Drew?

[husaberg]

No chick would do that?

[Drew]

Sex.

hmm, might not get any for a while.

Drew?
I'm busy tonight.

[chrisc]

De-reg FZR250 in wellington (http://www.turners.co.nz/Vehicles/Pages/Motorcycle.aspx?RefId=1093464)

De-reg ZXR250 Christchurch (http://www.turners.co.nz/Vehicles/Pages/Motorcycle.aspx?RefId=1100419)

Mangled Mudbug (for engine possibly) Auckland (http://www.turners.co.nz/Vehicles/Pages/Motorcycle.aspx?RefId=1098667)

[chrisc]

MB50

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-560265535.htm

MB100

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-557300903.htm

[Rick 52]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/pocket-pit-bikes/auction-558459181.htm
Cheep AX 100 good starter

[Henk]

AMB transponder as used at Mt Wellington, damn near the new price though

http://www.trademe.co.nz/Browse/Listing.aspx?id=561658292

[Pumba]

....damn near the new price though

So how the hell did he come up with the $700 new price then?

[Henk]

I have a sneaking suspicion that this is someone selling off her exes toys.

[Pumba]

Yea you maybe right. No idea what it is, or what it is worth, has Googled AMB and come up with one of the expensive road racing jobbies and priced it accordingly.

[Henk]

The in answer question is from me saying it's an MX one and way over priced, hopefully the relist or FPO will be more realistic if no bids come in. Convinced this will be one of the ex Rodney ones, not much call for MX transponder of MX north of the bombards now.

[Pumba]

Saw she answered. Checked MyLaps and the MX transponder is AU$394 landed (that includes AU$44 shipping). Still not quite the $700 advertised though.

[timg]

Hi, anybody got a sprocket carrier and rear disk for a RS125 they want to part with? Ta.

[kel]

Hi, anybody got a sprocket carrier and rear disk for a RS125 they want to part with? Ta.

Sprocket carrier? Are you after one of those fancy quick change Talon numbers? Standard setup just has 3 x cap screws bolted through the sprocket that push into the cush drive donuts in the rim.

[timg]

Sprocket carrier? Are you after one of those fancy quick change Talon numbers? Standard setup just has 3 x cap screws bolted through the sprocket that push into the cush drive donuts in the rim. Thanks Kel. Is that really all I need to stick a RS rim into my FXR? Was just looking at a schematic online and thought I'd need a bit more?
278673
Or can I get away with just the cap screws and a spacer? Donuts sorted thanks F5Dave :2thumbsup

Cheers.

[kel]

Thanks Kel. Is that really all I need to stick a RS rim into my FXR? Cheers.
No.
Send me the RS rims and I'll send you a nice set of Impulse wheels that will drop straight in.

[quallman1234]

Thanks Kel. Is that really all I need to stick a RS rim into my FXR? Was just looking at a schematic online and thought I'd need a bit more?
278673
Or can I get away with just the cap screws and a spacer? Donuts sorted thanks F5Dave :2thumbsup

Cheers.

I should have an original one, which fits the NX4 and 3.5 wide rims. should be able to machine the middle spacer. The only problem is my spares box is in Christchurch.
James jarman can make you taloon copy.

[cotswold]

http://www.trademe.co.nz/a.aspx?id=564078559

http://www.trademe.co.nz/a.aspx?id=563922861

http://www.trademe.co.nz/a.aspx?id=563871840

[RDjase]

Impulse wheels....................and the bit they bolt onto

http://www.turners.co.nz/Vehicles/Pages/Motorcycle.aspx?RefId=1102974

[crazy man]

rs125 shock
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-565064513.htm

[Pumba]

Anyone looking for sidecar parts.

Here is a wheel to start you off http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-564293593.htm

Or maybe some 10inch wheels, pretty sure these are the same that is on my frame http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-562227305.htm and http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-562944235.htm

[kel]

rs125 shock
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/suspension/auction-565064513.htm

Lasted all of 40 minutes

[koba]

Lasted all of 40 minutes

Was that you selling it?

[Pumba]

Was that you selling it?

Hope you asked permission:devil2:

[driftn]

Need an expansion chamber for gp 125, motors in a vj21 chassis. any body have any thing laying round?

[kel]

Need an expansion chamber for gp 125, motors in a vj21 chassis. any body have any thing laying round?

I have a VJ21 chamber you can have for $20. If your quick it might even hitch a ride to Wellington this weekend for a few beers.

[Drew]

I have a VJ21 chamber you can have for $20. If your quick it might even hitch a ride to Wellington this weekend for a few beers.

He's got some of those already.

[driftn]

Yeah was more hoping some one had some thing of more, the already made and bolt on variety.

[Muzzab]

Yeah was more hoping some one had some thing of more, the already made and bolt on variety.

Is a pipe from a rm80 any use to you?

[chrisc]

GP125 in Welly
http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-563693832.htm

I'd buy it but I have no more space, to many projects and not enough time

[chrisc]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-565084126.htm

[timg]

Hiya, Anybody got a used good condition Honda RS125 rear brake disk they can part with for not too much moolah. Thanks.

[chrisc]

This FXR has bucket written all over it - wellington 1200 ono

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-566316103.htm

[koba]

I'm cleaning out the shed to make room for the RS stuff.

http://www.kiwibiker.co.nz/forums/showthread.php/156932-Tyre-clean-out

[Str8 Jacket]

I'm cleaning out the shed to make room for the RS stuff.

http://www.kiwibiker.co.nz/forums/showthread.php/156932-Tyre-clean-out

Oh really, what bought that on?! ;)

[Pumba]

125cc Vtwin, For the bucketer that wants something a little different different.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-569661160.htm

[Kendog]

It's a sad day when this sort of sale is being considered.

http://www.kiwibiker.co.nz/forums/showthread.php/74048-Rangi-da-Munta?p=1130514421#post1130514421

[Ivan]

Ok so I have this CPI GTR150 150cc 4 stroke water cooled scooter its spun a crankcase bearing im pretty sure has a whirring bearing sound, I thought that it could possibly be good for parts for someone or even as a complete potential bucket bike it is single speed and auto clutch tho, 17 inch disk brake front end 16inch rear

Could make a good sidecar engine or set it up for a newbie it does 95kph ive rode it over the rimutakas and it smoked cars even its pretty cool little bike the only reason im not fixing it is im off to australia,


Also selling the YZF450 in background 2011 5 hours old full factory spares kit and all riding gear included which includes, Brand new Fly riding pants and shirt and white gloves, Brand new Rip N Roll Goggles, old Fly Riding pants, Fly Chest protector cut down to suit Leatt Neck Brace, Also Leatt Neck brace comes with this, Fly knee Gaurds, Fly boots have been used tho, As well as Rubber matting as used on boat decks for pit matting Basically everything needed to start Competitive motorcross racing instantly bar a helmet,

Will do the scooter the 450 and all the riding gear for 11grand

or the scooter on its own for 500

[F5 Dave]

How much for the skull? I assume its a relative so maybe its not for sale.

[husaberg]

How much for the skull? I assume its a relative so maybe its not for sale.

alas poor yorick i knew him well:rolleyes:

[Ivan]

skulls not myne this is just were i had both bikes at same time as i dont live there.

[F5 Dave]

Well I didn't think the skull was yours, else you wouldn't be typing on the internet.

[Ivan]

nah nah dave i mean i dont own it my younger brother brought the skull and hes a psycho so would give me the bash once i turned up in aussy for selling it

[Ivan]

and id take 400 for the scooter i just want it gone but dont wanna loose out to much brought it for 1200 in november

[Henk]

and id take 400 for the scooter i just want it gone but dont wanna loose out to much brought it for 1200 in november

How have you managed to devalue it by $800 in four months?

[Ivan]

How have you managed to devalue it by $800 in four months?


Its got a stuffed crankcase bearing and like I said im going to aussy i dont want to waste the money fixing it just trying to get some cash for it all to go in the fund to move away

[chrisc]

Some one jump on these!
http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-570624151.htm
http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-570622644.htm

[Ivan]

The Honda Rs125 Replica chassis I started to make, 90% complete frame (so far always find a new way of making it better) Fibreglass replica tank Subframe TZ125 tail piece and Pit bike engine Forks (in pieces) mock pair of forks good for making it roll swing arm etc

everything I can drag out 150 its yours will have to be a pick up deal

Theres rims etc,

[quallman1234]

I was realllllllllllllllllllllllllllllllllllllllllllllll llllllllly tired one night. and managed to loose a FXR front axle... Anyone got a spare?

[Pumba]

Looks like Steve is selling is bike

http://www.trademe.co.nz/Browse/Listing.aspx?id=572955376

[Ivan]

The Honda Rs125 Replica chassis I started to make, 90% complete frame (so far always find a new way of making it better) Fibreglass replica tank Subframe TZ125 tail piece and Pit bike engine Forks (in pieces) mock pair of forks good for making it roll swing arm etc

everything I can drag out 150 its yours will have to be a pick up deal

Theres rims etc,

bump or else im going to scrap it

[all4A50s]

bump or else im going to scrap it

Pm me as I'm interested in the rolling chassis.

[F5 Dave]

Looks like Steve is selling is bike

http://www.trademe.co.nz/Browse/Listing.aspx?id=572955376

Good greif. Serial builder & seller of 1/2 arsed attempts. I've lost count, must be over doz bikes in last decade.

[chrisc]

I was frustrated with trying to find a muffler to fit under my FXR that had some volume to it. I ended up finding and buying a pair of stainless mufflers from a 2008 Triumph Street Triple. They'd only had about 1000kms done on them and the one I have on my FXR sounds quite nice

I purchased the pair for $160 so I would like to recover half of that, ie $80.
See photos below, pick up is North Shore, Auckland. I can post but I'm pretty busy so I hope you don't need it instantly.

Length approx 340mm, width approx 140mm

http://christophercain.cc/b/d/bikes/IMG_9100.jpg

http://christophercain.cc/b/d/bikes/IMG_9099.jpg

[John_H]

I was frustrated with trying to find a muffler to fit under my FXR that had some volume to it. I ended up finding and buying a pair of stainless mufflers from a 2008 Triumph Street Triple. They'd only had about 1000kms done on them and the one I have on my FXR sounds quite nice

I purchased the pair for $160 so I would like to recover half of that, ie $80.
See photos below, pick up is North Shore, Auckland. I can post but I'm pretty busy so I hope you don't need it instantly.

Length approx 340mm, width approx 140mm

http://christophercain.cc/b/d/bikes/IMG_9100.jpg

http://christophercain.cc/b/d/bikes/IMG_9099.jpg

Have you fitted yours? How loud is it?

[chrisc]

Have you fitted yours? How loud is it?

Muffler sold pending payment/delivery

Very acceptable (read: a shit load quieter than it was before). I don't have a meter but I would expect it to pass a test (knock on wood!).

Maybe Brian or Henk could pipe in here and comment as they were at Te Puke for its first run with the new muffler. The tune was way out and was running like a dog but that's not the mufflers fault.

[goivy26]

Hi folks,

I have an unfinished fxr 150 for sale. It's a unfinished build with 17inch Bandit wheels, alloy sproket and all the parts to get it sorted and racing.

Comes with new 1mm Oversized Piston Kit and new forks seals (not fitted).

Engine runs well.

$1000 ono

PM or phone me for photos etc.

Thanks

Ivan

[goivy26]

Sorry, left my ph number off , 02102586178

Ivan

[Geriatric]

Hi,

This is my old steel GSXR frame which my nephew stuck a Lifan 150 in. He is now working overseas so it has to go.

The Lifan is slow (maybe 12 HP?) but has only had about 6 outings since new and would make a good starter bike
It has Dunlop slicks which have a lot of life on them and the bike handles very well.
Braided brake line and nyloned. The tank has the bottom cut out with a plastic 3.5L tank fitted.
Doesn't look good, been left out in the weather and has a bit of surface rust, so TLC will may be in order.
Want $400 for it.
Call Adrian 021 227 8047

[koba]

I have an unfinished fxr 150 for sale.

You giving up on Buckets, or just selling for now?

[goivy26]

You giving up on Buckets, or just selling for now?

Just about to have my second full hip replacement, had my 1st one when I was 36! and 4 years later need the other side done so have to consider the long term. Reckon I'll be back soon though:woohoo:

[koba]

Just about to have my second full hip replacement, had my 1st one when I was 36! and 4 years later need the other side done so have to consider the long term. Reckon I'll be back soon though:woohoo:

Damn! :blink:
That sounds really hurty.
Still, I hear they are well worth the short term pain.

good luck with it Man, hopefully we will see you back sometime soon, looks like you were just getting started! :scooter:

[Geriatric]

Hi,

This is my old steel GSXR frame which my nephew stuck a Lifan 150 in. He is now working overseas so it has to go.

The Lifan is slow (maybe 12 HP?) but has only had about 6 outings since new and would make a good starter bike
It has Dunlop slicks which have a lot of life on them and the bike handles very well.
Braided brake line and nyloned. The tank has the bottom cut out with a plastic 3.5L tank fitted.
Doesn't look good, been left out in the weather and has a bit of surface rust, so TLC will may be in order.
Want $400 for it.
Call Adrian 021 227 8047

This has been sold thanks. Another new bucketeer in Wellington

[quallman1234]

Anyone keen on hyosung250R engine? Possible get rid of a cylinder + big bore? 4 Valve head etc. Turns over fine, Haven't tried to run it.
Got one in my shed, might use it might not, was thinking a go-kart. If anyone's keen i'll sell. 250$
Headers/electrics come with

[Drew]

Anyone keen on hyosung250R engine? Possible get rid of a cylinder + big bore? 4 Valve head etc. Turns over fine, Haven't tried to run it.
Got one in my shed, might use it might not, was thinking a go-kart. If anyone's keen i'll sell. 250$
Headers/electrics come with
That's a fuckin heavy lump to use as a bucket motor bro. Custom crank would sort it if someone was inclined to make it...Sketchy?

[Henk]

Anyone keen on hyosung250R engine? Possible get rid of a cylinder + big bore? 4 Valve head etc. Turns over fine, Haven't tried to run it.
Got one in my shed, might use it might not, was thinking a go-kart. If anyone's keen i'll sell. 250$
Headers/electrics come with

Probably better off trying to sell it to one of the hyo cup guys up here. I know I blew one up and paid $450 exchange for another engine.

[quallman1234]

Probably better off trying to sell it to one of the hyo cup guys up here. I know I blew one up and paid $450 exchange for another engine.

Yeap, not really trying to sell it particularly hard. Might use it in a go-kart yet. I'll offer it to those guys though, cheers.

Its actually not that heavy. Maybe 30kg. Get rid of a head/cylinder/rod (but they have a pressed pin which is ass) and it wouldn't be too bad. Could get it under a 100 total.
Def wouldn't be built to win. More to get someone on it and be different.

[chrisc]

I have the road gear for a Suzuki GP125 and a Suzuki FXR150 going cheap if you or anyone you know is interested

[chrisc]

I have the road gear for a Suzuki GP125 and a Suzuki FXR150 going cheap if you or anyone you know is interested

281744

Here's a photo

[Pumba]

Some one please by this http://www.trademe.co.nz/Browse/Listing.aspx?id=587209523, before the guy fucks a good bike because he cant be bothered rebuilding the carb

[richban]

Selling one of my engines. To fund next build.

http://www.trademe.co.nz/Browse/Listing.aspx?id=591776908&ed=true

[Gigglebutton]

Selling one of my engines. To fund next build.

http://www.trademe.co.nz/Browse/Listing.aspx?id=591776908&ed=true

I have bid on it cheers Rich :)

[Pumba]

For those that may have mised it in the Online Trading section of the website http://www.kiwibiker.co.nz/forums/showthread.php/158568-Dyno-aquisition-system

[Henk]

AMB transponder for sale. As used at Mt Wellington.

http://www.trademe.co.nz/Browse/Listing.aspx?id=593266240

[chrisc]

GP125 bucket in Auckland
http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-593239133.htm

Stock FXR150 bucket for sale by Gavin V I believe
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-590221829.htm

[chrisc]

Another FXR150 in Auckland
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-593646186.htm

[bigreddog]

http://www.fxr150.co.nz/forum/showthread.php?849-FXR-150-Bucket-Racer-for

[Pumba]

Here we go Expansion Chamber Stampings (http://www.trademe.co.nz/a.aspx?id=597483329)

Bolt on HP according to the advert

[richban]

FXR150 Frame Swingarm and forks. Forks are good with new seals not long before I built the new bike. They are a pair. 6 pack of Tuatara Pilsner and take them away.

[Henk]

FXR150 Frame Swingarm and forks. Forks are good with new seals not long before I built the new bike. They are a pair. 6 pack of Tuatara Pilsner and take them away.

If this wasn't at the other end of the damn Island I'd take it.

[Str8 Jacket]

If this wasn't at the other end of the damn Island I'd take it.

Want us to sort you out Henkster?

[F5 Dave]

Here we go Expansion Chamber Stampings (http://www.trademe.co.nz/a.aspx?id=597483329)

Bolt on HP according to the advert
yeah that header looks good for a 600 single

[Henk]

Want us to sort you out Henkster?

I only want the forks.
I'll have a think about it. Be six months before the away meet pass the parcel season starts.

Actually. Rich does that have the tripple clamps as well?

[richban]

I only want the forks.
I'll have a think about it. Be six months before the away meet pass the parcel season starts.

Actually. Rich does that have the tripple clamps as well?

Rodger that. complete. Catch is you have to take the rest of it. Need space.

[Henk]

Rodger that. complete. Catch is you have to take the rest of it. Need space.

Bugger I was hoping you could cut the front end off it and throw the rest away sine i want the forks for the road bucket and the steering head for a sidecar build. Be a while before I could collect anyway and the only person I could probably convince to store it in the meantime gets threatened with eviction by his mrs when he brings bike parts home :)
I'll see if I can come up with a plan unless someone else grabs it first.

[Henk]

Want us to sort you out Henkster?

Might have a plan, but otherwise when are you next going to Vegas? If you have a corner to hide it in for that long.

[Kendog]

Bugger I was hoping you could cut the front end off it and throw the rest away sine i want the forks for the road bucket and the steering head for a sidecar build. Be a while before I could collect anyway and the only person I could probably convince to store it in the meantime gets threatened with eviction by his mrs when he brings bike parts home :)
I'll see if I can come up with a plan unless someone else grabs it first.
I can store here for as long as you need.

[koba]

Might have a plan, but otherwise when are you next going to Vegas? If you have a corner to hide it in for that long.


I can store here for as long as you need.

No excuses left!

Say the word man!

We can transport.

[Henk]

I can store here for as long as you need.

Might be six months or possibly more. No plans for a road trip down anytime soon so could be jan and the start of the NI series before anything happens. If you are cool with that it's a go and I need to mail order Rich some beer.

[F5 Dave]

Can store for you if easier

[Henk]

Can store for you if easier

Cheers. Looks like I just scored some bits. I'll let Helen and Malcolm decide what is easier since they are in a better position to know.

[Kendog]

No excuses left!

Say the word man!

We can transport.


Can store for you if easier
We are in Whitby now, let me know when if we become the chosen storage spot.

[quallman1234]

My mates pulled the pin on me and wants to sell his bucket. Only spent a million hours on the thing, for nothing.

Its a CBR250 MC17, FXR150 Engine. 17"s all round with 125GP slicks and 125GP tail piece. Will be finished with Nylon/Race ready in a few weeks. PM me if your interested in purchasing it. Price range ~1500
Wellington Region.

[koba]

Rodger that. complete. Catch is you have to take the rest of it. Need space.


I can store here for as long as you need.


Can store for you if easier


Sooo, we can pick it up and bring to wherever.

May be able to do it this weekend if it works out with Rich and whoever stores it.

Eeny meeny miney mo...

Dave is closer to us so works better out of laziness but if size timeframe are a problem and Kendog is happier with that I don't mind going to Whitby and checking out his new digs.

[koba]

My mates pulled the pin on me and wants to sell his bucket. Only spent a million hours on the thing, for nothing.

Its a CBR250 MC17, FXR150 Engine. 17"s all round with 125GP slicks and 125GP tail piece. Will be finished with Nylon/Race ready in a few weeks. PM me if your interested in purchasing it. Price range ~1500
Wellington Region.

Man, that's patience testing!

[Kendog]

Sooo, we can pick it up and bring to wherever.

May be able to do it this weekend if it works out with Rich and whoever stores it.

Eeny meeny miney mo...

Dave is closer to us so works better out of laziness but if size timeframe are a problem and Kendog is happier with that I don't mind going to Whitby and checking out his new digs.
Will be home most of the weekend except Sat night if Dave doesn't work out.

[quallman1234]

Man, that's patience testing!

What a fucken wanker ae. Kinda of needs a shovel to his face after this load of bollocks.

His work ethic when we did actually work on it went a little bit like this. Get Coffee, look at me work. 10 minutes later make some winging excuse to go home and give up for the night.
Spends more time on facebook than breathing.

I knew i was in trouble when he tested my bike, crashed it then couldn't be bothered spending 30 minutes on it to get it ready for the next day.

OFF Topic :P.

[F5 Dave]

A mate might want to buy it, I'll give him a buzz while the thread is off topic. what was the topic?

[quallman1234]

A mate might want to buy it, I'll give him a buzz while the thread is off topic. what was the topic?

Sweet. I'll post pictures when its ready. Few weeks a way, so maybe hold fire.

[steveyb]

1 x pair used 125GP Bridgestone slicks YDC compound.
1 x used Bridgestone rear rain. A bit worn in middle, but sides still fair.

PM me.

Cheers.

[L.B]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-599127354.htm

[600rr420]

honda 110 for sale

brought a year ago intending to do it up and race. was running when i brought her, now doesnt start and i dont have then time to tinker.
$450 and its yours plus ill throw in a 17" alloy rim too
0274 914 914
cheers

[davebullet]

1979 or 1980 Suzuki GT125
Parallel twin 2-stroke
Not registered or warranted
Suit restoration or bucket racer
Parts complete except for the clutch cable cover (see left hand side)
Wiring loom intact (so could be cut for racing) or used to restore
Kick start (no electric with this model) but easy to turnover
comes with spare rims and tyres

Starts 1st or 2nd kick

Work I've done:
- New MotoBatt battery
- forks straightened and new seals
- new front brake master cylinder

Take a look in here:
http://www.kiwibiker.co.nz/forums/album.php?albumid=4652

PM me offers,
Thanks!

[quallman1234]

Anyone got a stock FXR throttle cable?

[John_H]

Anyone got a stock FXR throttle cable?

I'll have a rummage around for you.

[quallman1234]

I'll have a rummage around for you.

Don't try too hard. For a mate of a mate.

Thanks tho!

[quallman1234]

You name it i've probably got it. Excluding engine parts.

Several sets of rims for sale, with discs.

[Dutchee]

You name it i've probably got it. Excluding engine parts.

Several sets of rims for sale, with discs.
Tank? Betchya not

[steveyb]

Hi all.
You wanna step up the appearance and feel of your Bucket MotoGP racer?
Got an RS125 chassis bike, but want the later model tank for it?

I am making gas tanks for the NX4 2000+ model RS125 (the flat top, flush mount cap ones) if anyone is interested.
Can make them in regular GRP, Carbon/Kevlar (recommended for strength, abrasion resistance and weight), or Carbon (more difficult to work, light but a bit weaker, needs to be reinforced).
Will use vinyl ester resin or epoxy resin (for chemical i.e. fuel, resistance) depending on customer preference.
Will not be able to guarantee that the finish will be perfect, so the tanks will likely require a bit of finishing and painting.
Customers will have to fit their own fuel cap, spigots/tap and breather.
Can be supplied with anti-slosh foam if desired.

NX4 tanks are almost impossible to find these days and cost moonbeams if you can find one, especially the later model ones.
I think that the NX4 tank will fit onto the NF4 chassis and you will be able to make it fit your CBR's and FXR's I am sure.
For the latter you might need a custom base, which can be done with some effort.

But, don't all rush at once, I don't have the time or facilities to make hundreds of them.

Steve
Moto Academy NZ
Innovative Moto Developments IMD250
021924493

GRP: $450 + GST
Carbon/Kevlar: $495 + GST
Carbon: $595 + GST

PS I still have tyres available as listed earlier.