Blown up bike for cheap - easy fix or not

[honda_power]

Hi,
I have been offered a blown 125 for a good price... Hes adement that it just needs a top end kit... Is this poss or is there gona be more wrong with it? Would be a good project to learn about rebuilding before I do my yz

[B0000M]

Hi,
I have been offered a blown 125 for a good price... Hes adement that it just needs a top end kit... Is this poss or is there gona be more wrong with it? Would be a good project to learn about rebuilding before I do my yz

what is it?

[vr4king]

If its just a piston/ring etc then could be worth but if its grenaded the bore it could be a diff story

Guees the real question is how cheap is it

And they are super easy to rebuild took me all up about 2 hours max to do mine and id never done one before the next one i did was even quicker

And both bikes still going strong after about 40hrs

[MIXONE]

If it's a two smoker it should be pretty straight forward and will be good practice for you.I rebuilt one in my flat's kitchen with nothing more then very basic tools.(My flatmates weren't too impressed with all the bits everywhere though)

[kevfromcoro]

is it a 2 stoke or 4
i guess its a 4 stroke if it needs the top end doing

[barty5]

Hi,
I have been offered a blown 125 for a good price... Hes adement that it just needs a top end kit... Is this poss or is there gona be more wrong with it? Would be a good project to learn about rebuilding before I do my yz

depends on what it is and how old it is

[honda_power]

Its a 125 2 stroke. Bore is good

[Taz]

You're not going to give us anything more to go on?? Is the motor apart? How do you know bore is good?

[honda_power]

I havnt acually seen it. 01 rm125 $800. Im just going off what iv been told.

[barty5]

I havnt acually seen it. 01 rm125 $800. Im just going off what iv been told.

So piston kit, little end and gasket kit normally $322.33 but thats addujustable
would make it a roundbout a $1050.00 bike

[B0000M]

buy it, but mikata parts from motocrossparts.co.nz for $130 ish

then tell us after a while if its still mint, nobody seems to want to use these bits in case their expensive bike goes bang, but im yet to find anything bad about them!

[vr4king]

is it a 2 stoke or 4
i guess its a 4 stroke if it needs the top end doing

Seriously? WTF

[L Rider]

buy it, but mikata parts from motocrossparts.co.nz for $130 ish

then tell us after a while if its still mint, nobody seems to want to use these bits in case their expensive bike goes bang, but im yet to find anything bad about them!

that sounds like a bloody good plan

[barty5]

buy it, but mikata parts from motocrossparts.co.nz for $130 ish

then tell us after a while if its still mint, nobody seems to want to use these bits in case their expensive bike goes bang, but im yet to find anything bad about them!

could also be a good way to burn 900 odd bucks

[B0000M]

buy a mitaka bottom end too then!

the motocrossparts guy reckons he's a engine machinist with 25 years experience in the industry, and theyve been selling that brand for over a year now, so they cant be too bad.