Bucket bits wanted & services needed

**laserracer** · 4th November 2009, 13:54

Wanted carb for xr/xl/sl/cb i think they are all the same 22mm khein its off a xr 100

**Damien_Toman** · 4th November 2009, 23:38

Originally Posted by Bren_chch

hey, i would grind that out and get it welded up, all good.

I'll check out a local welder to see if they will do it. Thanks.

**Damien_Toman** · 4th November 2009, 23:41

Originally Posted by Pumba

Hi Dammian. couple of pictures here of what I have done and Buddha as well. Depends if you are going to make a habbit of crashing, I seem to have made that habbit so wanted somthing a bit stronger than standard.

Thanks Pumba. The pictures really help. I might now have a go at making my own.

**Pumba** · 6th November 2009, 17:01

Originally Posted by Damien_Toman

Thanks Pumba. The pictures really help. I might now have a go at making my own.

Yea they are not that hard. Min are actually more complicated than they need to be. I made them with the intention of being adjustable but I set them in one position, rode it round and thought year that will do and they have never been moved since.

**Trudes** · 23rd November 2009, 06:44

Anyone have a RG50 footpeg mount they don't need?

**Number One** · 23rd November 2009, 07:19

Originally Posted by Trudes

Anyone have a RG50 footpeg mount they don't need?

And how's the handlebar? Will it straighten up will I need to source a replacement one for ya?

**Trudes** · 23rd November 2009, 07:39

Originally Posted by Number One

And how's the handlebar? Will it straighten up will I need to source a replacement one for ya?

We're going to try and straighten it and if it doesn't Skunk said he may have a replacement, so that should be sweet.

**Number One** · 23rd November 2009, 09:04

Originally Posted by Trudes

We're going to try and straighten it and if it doesn't Skunk said he may have a replacement, so that should be sweet.

Well if he doesn't let me know! Thanks for the soak too

Back to bed with this broken down bod again now.

**all4A50s** · 23rd November 2009, 17:42

Originally Posted by Trudes

Anyone have a RG50 footpeg mount they don't need?

I might be able to help you out. I'll have a hunt through tonight and let you know.

**Danae** · 24th November 2009, 14:12

WANTED: FXR Clutch lever + mount

Mount is cracked, lever is okay, just a bit ground down.

**quallman1234** · 24th November 2009, 15:02

Originally Posted by Danae

WANTED: FXR Clutch lever + mount

Mount is cracked, lever is okay, just a bit ground down.

Hey there, you can rock down to your local bike shop and buy a generic clutch bracket and lever for 20 odd bucks.

**F5 Dave** · 24th November 2009, 15:55

Just check it has mirror mount if you need it (too lazy to look for an FXR pic). But any wrecker will have a suitable one if no dice at shop.

**quallman1234** · 24th November 2009, 15:59

Originally Posted by F5 Dave

Just check it has mirror mount if you need it (too lazy to look for an FXR pic). But any wrecker will have a suitable one if no dice at shop.

Oh yeah completely forgot about that. Fair point. You only need a mirror on the right side legally anyway!

**Henk** · 24th November 2009, 16:14

Doesn't need a mirror mount.
I got some cheap emgo lever for the bucket at one stage, you can get the GP short number that is less likely to break if you drop it again for not that many coins.
Any aftermarket lever should do, doesn't need mirror mounts or idiot switches from memory.