Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: Rear brake levers

  1. #1
    Join Date
    10th February 2006 - 13:31
    Bike
    2011 YZ450f & 2007 YZ250f & K6 GSXR1000
    Location
    Auckland, North Shore
    Posts
    765

    Rear brake levers

    So people, bent it twice now, really not keen to pay $200.70 for a genuine yamaha lever, anyone know of one lying around in a wreakers, or maybe a aftermarket one that could source from the states?

    Or even someone who could bend it back into shape

    Thoughts?

    Cheers
    Yamaha YZ450f 2011
    Yamaha YZ250f 2007
    Suzuki K6 GSXR1000

  2. #2
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    Learn to ride bro!

    I guess it beats dropping the Gixxer though!
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  3. #3
    Join Date
    1st December 2008 - 16:59
    Bike
    300EXC
    Location
    Waitakere
    Posts
    1,126
    Quote Originally Posted by Boosted View Post
    So people, bent it twice now, really not keen to pay $200.70 for a genuine yamaha lever, anyone know of one lying around in a wreakers, or maybe a aftermarket one that could source from the states?

    Or even someone who could bend it back into shape

    Thoughts?

    Cheers
    Source an aftermarket one from say.. watsons racing? $40 maybe? I went through so many on my YZ.. Sucked.

  4. #4
    Join Date
    10th February 2006 - 13:31
    Bike
    2011 YZ450f & 2007 YZ250f & K6 GSXR1000
    Location
    Auckland, North Shore
    Posts
    765
    having to remember its the rear foot one, not handle bars, there would b no way there would be one for $40 lol.... might give them a call tho, was there buying sprokets and chains hahaha

    and dude, already dropped it haha.... good ol oggy knobs saved it pretty much tho
    Yamaha YZ450f 2011
    Yamaha YZ250f 2007
    Suzuki K6 GSXR1000

  5. #5
    Join Date
    2nd August 2006 - 22:17
    Bike
    hopefully bringing something back to NZ
    Location
    Hartford Connecticut USA
    Posts
    4,109
    heat it up and bend it back
    [SIGPIC][/SIG

  6. #6
    Join Date
    10th February 2006 - 13:31
    Bike
    2011 YZ450f & 2007 YZ250f & K6 GSXR1000
    Location
    Auckland, North Shore
    Posts
    765
    Tis what ive been told, that might be the only option.... not paying 200 for a lil bit of metal, fuck that....
    Yamaha YZ450f 2011
    Yamaha YZ250f 2007
    Suzuki K6 GSXR1000

  7. #7
    Join Date
    24th November 2005 - 12:40
    Bike
    anything I can get my grubby wee paws on
    Location
    Outside
    Posts
    1,532
    Quote Originally Posted by Boosted View Post
    Or even someone who could bend it back into shape
    Why not try fixing it yourself? Nothing to lose really.

    Applying heat makes a difference - oven, gas torch or camp fire - even just a little - makes it much less likely to snap
    =mjc=
    .

  8. #8
    Join Date
    23rd December 2006 - 20:07
    Bike
    Honda cb400sf
    Location
    Napier
    Posts
    457
    then once you fix it get one of those wire things that attach to it so it can't bend to far

  9. #9
    Join Date
    27th April 2009 - 23:21
    Bike
    2009 Yamaha YZF450
    Location
    Wellington
    Posts
    151
    Quote Originally Posted by Boosted View Post
    So people, bent it twice now, really not keen to pay $200.70 for a genuine yamaha lever, anyone know of one lying around in a wreakers, or maybe a aftermarket one that could source from the states?

    Or even someone who could bend it back into shape

    Thoughts?

    Cheers
    Bend it back, if it breaks ... Weld it.. ive seen some for $40 just got to remember where

  10. #10
    Join Date
    14th July 2006 - 21:39
    Bike
    2015, Ducati Streetfighter
    Location
    Christchurch
    Posts
    9,081
    Blog Entries
    8
    Alloy or steel?

    You could easily weld up a new one using the existing spline mount. Maybe put a folding tip on it to take some of the force next time.

  11. #11
    Join Date
    24th July 2007 - 13:19
    Bike
    2010 GasGas EC300
    Location
    waitakere city
    Posts
    135
    Quote Originally Posted by Boosted View Post
    So people, bent it twice now, really not keen to pay $200.70 for a genuine yamaha lever, anyone know of one lying around in a wreakers, or maybe a aftermarket one that could source from the states?

    Or even someone who could bend it back into shape

    Thoughts?

    Cheers
    spose thats what happens when you have an off in culverts hey...

  12. #12
    Join Date
    10th February 2006 - 13:31
    Bike
    2011 YZ450f & 2007 YZ250f & K6 GSXR1000
    Location
    Auckland, North Shore
    Posts
    765
    thanks guys

    and nar wasn't that dam culvert it was b4 that :P lol coming down a nice slippery hill way to fast
    Yamaha YZ450f 2011
    Yamaha YZ250f 2007
    Suzuki K6 GSXR1000

  13. #13
    Join Date
    12th September 2008 - 17:56
    Bike
    09 KTM 250 Exc
    Location
    Waiuku City
    Posts
    270
    KTM ones are NOT $400

  14. #14
    Join Date
    26th July 2007 - 10:59
    Bike
    2009 YZF450
    Location
    Pukekohe
    Posts
    605
    Found this....you could ask if they would send to NZ
    http://cgi.ebay.com.au/YAMAHA-YZ250F...QQcmdZViewItem

  15. #15
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    Quote Originally Posted by IIIRII View Post
    KTM ones are NOT $400
    BAM!!!
    SHE LOOKED UP AT ME WITH BLOOD IN HER EYES
    THEN HER SKIN FELL OFF
    AND SHE PROMPTLY DIED
    IT WAS EBOLA, LA LA LA EBOLA

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •