Older KLR650 electrical woes.

[98tls]

Long story short Mag has healthy output CD1 just doesnt give it to the coil when attached,ideas?

[98tls]

Cmon you buggers,must be someone out there good with lecky problems,have checked all the obvious things and no go,its getting cold in the shed and ive got a date with a Woodstock,help me get this thing sorted eh.

[98tls]

FFsake,18 views and not a clue,plenty to say about waving though.Useless.

[Howie]

have a check of this thread on klr650.net, it also has a link to a wiring diagram if you don't have one, has a few ideas for checking the ignition system. http://www.klr650.net/forums/showthr...t=37265&page=2

[98tls]

have a check of this thread on klr650.net, it also has a link to a wiring diagram if you don't have one, has a few ideas for checking the ignition system. http://www.klr650.net/forums/showthr...t=37265&page=2

Cheers mate,at last a motorcyclist.

[Howie]

Cheers mate,at last a motorcyclist.

No worries, hope it's some help to you, I have a haynes oor clymer manual with the electrical tests in it if you want to know any specfic tests, and voltage/ohm readings just let me know.

[hmmmnz]

is your pick up working? measure the pickup coil and make sure there is continuity
i doubt very much that your cdi has packed in,
also check your kill switch