Bucket bits wanted & services needed

**Pumba** · 28th March 2011, 09:49

Originally Posted by Henk

Need a couple of FXR chain adjusters, bought most of an FXR that has been leaning against a shed on Waiheke and have it mostly complete with parts from my collection. If anyone wants to sell me a couple let me know, otherwise I'll hit the wreckers sometime next week.

So, I presuming this will be the full on set up wet bike then? Permantly fitted with wets to eliminate those pesky wheel changes, maybe a softer suspension setting for the wet track? Or are you going to just starting leaving the bikes at each of the tracks we race at to get rid of that pesky need to load up the van? I mean you would have too, its not like your shed at home has any spear space for ANOTHER bike.

Ok my rant over, let normal trasmission resume.

Walks off cursing Henk shaking head and jeolus as hell that he has another bike in his shed

**Henk** · 28th March 2011, 15:49

Originally Posted by Pumba

So, I presuming this will be the full on set up wet bike then? Permantly fitted with wets to eliminate those pesky wheel changes, maybe a softer suspension setting for the wet track? Or are you going to just starting leaving the bikes at each of the tracks we race at to get rid of that pesky need to load up the van? I mean you would have too, its not like your shed at home has any spear space for ANOTHER bike.

Ok my rant over, let normal trasmission resume.

Walks off cursing Henk shaking head and jeolus as hell that he has another bike in his shed

All valid points, so do you have some chain adjusters or not?

To be honest this is probably going to be for sale soon, needed CDI, coil, sproket carrier, chain and sprockets when I got it, since I had all of these to spare figured it was an easy way to get another bucket on the scene, missed the one bit I didn't have.

The wet bike idea is appealing though, I'll ask Jess if I can leave it at your place and get you to haul it around for me. What does she drink? might have to ply her with alcohol before I ask.

**RDjase** · 28th March 2011, 16:55

Originally Posted by Pumba

So, I presuming this will be the full on set up wet bike then? Permantly fitted with wets to eliminate those pesky wheel changes, maybe a softer suspension setting for the wet track? Or are you going to just starting leaving the bikes at each of the tracks we race at to get rid of that pesky need to load up the van? I mean you would have too, its not like your shed at home has any spear space for ANOTHER bike.

Ok my rant over, let normal trasmission resume.

Walks off cursing Henk shaking head and jeolus as hell that he has another bike in his shed

Bikes are always happier in pair's, three's, quad's of more................

Havn't got many orphan bikes in my fleet, there always seems to be a "spare" turn up

One Impulse frame even came from Henk, I looked at it this morning to see if the adjusters were the same as FXR

**Gigglebutton** · 28th March 2011, 16:59

Does any one have a rotor and stator off a motor cross bike with a charging circuit for sale

Pm me if you have

Dazz

**Henk** · 28th March 2011, 17:42

Originally Posted by RDjase

Bikes are always happier in pair's, three's, quad's of more................

Havn't got many orphan bikes in my fleet, there always seems to be a "spare" turn up

One Impulse frame even came from Henk, I looked at it this morning to see if the adjusters were the same as FXR

No XR100 motors in your shed are there? If I can find one I'll probably flick the FXR motor and turn the frame into an F5 bike for Michelle.

**RDjase** · 28th March 2011, 18:02

Originally Posted by Henk

No XR100 motors in your shed are there? If I can find one I'll probably flick the FXR motor and turn the frame into an F5 bike for Michelle.

No 100 4T's. Might be able to find a 50 2T, I have a hunt around for both

**ac3_snow** · 28th March 2011, 22:26

Originally Posted by Pumba

its not like your shed at home has any spear space for ANOTHER bike.

hey Henk sounds like you need a bigger shed

haha and maybe a bigger van!

**grantnz** · 17th April 2011, 19:01

Looking for front and rear TZR 250 disc rotors. Front is 320mm and fits a lot of different bikes.

**Ivan** · 18th April 2011, 16:38

anyone got any fork springs out of anything from a fxr150 right through to any 250 springs not dirt bike tho just road

**Slingshot** · 18th April 2011, 19:08

Originally Posted by Ivan

anyone got any fork springs out of anything from a fxr150 right through to any 250 springs not dirt bike tho just road

Pretty sure I've got some FXR fork springs - will have a look and will let you know.

**Ivan** · 20th April 2011, 21:41

cheers man would be good

**Crock** · 22nd April 2011, 14:55

Hi Guys, I am just getting into abit of bucketing and have fitted a 28mm OKO flat side to FXR 150. Is there an off the shelf throttle cable available... need the small nipple and different thread at carb end ???
Thanks.

**Moooools** · 22nd April 2011, 18:43

Originally Posted by Crock

Hi Guys, I am just getting into abit of bucketing and have fitted a 28mm OKO flat side to FXR 150. Is there an off the shelf throttle cable available... need the small nipple and different thread at carb end ???
Thanks.

You will probably have to make your own. You can buy a cable kit and some different ends (if they are not included) and solder yourself one up if you go to the right sort of motorcycle dealer - probably a more dirt oriented place.

There may be something sock thats works though.

**cotswold** · 23rd April 2011, 08:25

I picked up an AX 100 the other day, I got it blind was just told it was a 2 stroke commuter, It is a a rusty heap but turns over, if any one wants it it's free to anyone who can be bothered to pick it up. Going to scrappy if not.
Cheers