Bucket bits 4 sale

**Buckets4Me** · 28th December 2011, 13:55

Originally Posted by Bren_chch

ohhh that looks fun!

http://www.kiwibiker.co.nz/forums/sh...6-Yamagama-100

i belive this is the start of it

**Pumba** · 28th December 2011, 15:16

Originally Posted by Bren_chch

ohhh that looks fun!

Looks like you will be able to tell us just how much fun it will be

**husaberg** · 1st January 2012, 04:27

Fxr150 motor fixer upper as a spare
http://www.trademe.co.nz/a.aspx?id=436294982

RGV250 bits going cheap
http://www.trademe.co.nz/Members/Lis...?member=304233

**Ivan** · 5th January 2012, 21:21

Im selling on behalf of my dad his rims of one of these zx250 ninjas they are brand new pretty much with discs and cush drive http://2.bp.blogspot.com/-MGccMCzPr3...inja-250-r.jpg

300 ono these are perfect width for fitting 125 gp sized tires

**Squiggles** · 9th January 2012, 16:25

I've got a GN250 Carb, bit of corrosion externally. Have taken the top off and couldn't see any holes in the diaphragm. Came off my commuter GN when I scrapped it at the start of last year. Hoping to get $40 for it.

**Rick 52** · 10th January 2012, 09:54

Good starter CB 125 single Ay Henk ?
http://www.trademe.co.nz/a.aspx?id=438705099

**cotswold** · 10th January 2012, 13:41

Originally Posted by Rick 52

Good starter CB 125 single Ay Henk ?
http://www.trademe.co.nz/a.aspx?id=438705099

Can it be ridden with one hand?

**Henk** · 10th January 2012, 16:36

Originally Posted by Rick 52

Good starter CB 125 single Ay Henk ?
http://www.trademe.co.nz/a.aspx?id=438705099

Not a bad starter bucket. Main problem is the tyres, BT39s that I put on that must have about four race meets and a two hour on them, but super skinny and easy to ride off the edge, also when you start climbing all over it like a monkey to try and hold more corner speed the pipe can melt your right boot.

Originally Posted by cotswold

Can it be ridden with one hand?

Unfortunately not, if it could be, and I had seen it on TM early enough I might have bought it back.

**quallman1234** · 11th January 2012, 16:32

http://www.trademe.co.nz/motors/moto...-437879804.htm

**Pumba** · 11th January 2012, 17:23

Originally Posted by quallman1234

http://www.trademe.co.nz/motors/moto...-437879804.htm

Just have to sleeve it down and then install it in your choice of frame backwards to get the drive sprocket on the "normal" side

**husaberg** · 11th January 2012, 18:39

Originally Posted by Pumba

Just have to sleeve it down and then install it in your choice of frame backwards to get the drive sprocket on the "normal" side

Then after you have sleeved it you might want to destroke as well.

Is that factored into the plan?

If you flip the wheel in most frames it will be on the right side for a Rotax or Aprillia.

**Pumba** · 11th January 2012, 19:40

Yes of course, the problem with just turning around the wheel is that unless it a really old frame with a spindly little swing arm that is symetrical, something always gets in the way.

All in theory of course

**Dutchee** · 14th January 2012, 11:31

http://www.kiwibiker.co.nz/forums/sh...5-Bucket-Racer good starter bucket for someone down Wellington region. even if that's about the crappiest ad I've seen

**F5 Dave** · 14th January 2012, 20:02

Yeah he's a kunt. get a haircut , oh wait, he did.

**koba** · 14th January 2012, 23:41

Originally Posted by Dutchee

http://www.kiwibiker.co.nz/forums/sh...5-Bucket-Racer good starter bucket for someone down Wellington region. even if that's about the crappiest ad I've seen

Originally Posted by F5 Dave

Yeah he's a kunt. get a haircut , oh wait, he did.

Cheers guys, love to love you two too.