Page 9 of 14 FirstFirst ... 7891011 ... LastLast
Results 121 to 135 of 204

Thread: Is it too much to move from a 250 to 1000 right after getting fulls?

  1. #121
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by quickbuck View Post
    Well, yup. The potential is there more than ever...
    No doubt about that.

    Carver, can I have a go on a Thou if you have one?
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  2. #122
    Join Date
    3rd April 2010 - 16:22
    Bike
    2000 Aprilia RSV Mille,
    Location
    ChCh
    Posts
    896
    Yes! No! No! Yes!

    Mate, please yourself. Pay your money and make your choice.

    If you drop it, don't post here admitting it... After all, if you do it is totally your choice, your fault.

    Whatever you do, make sure it brings a big smile to your face every time you sling your leg over.
    "I don't like it, and I'm sorry I ever had anything to do with it." -- Erwin Schrodinger talking about quantum mechanics.

  3. #123
    Join Date
    10th August 2008 - 18:24
    Bike
    Suzuki RF600R
    Location
    Christchurch
    Posts
    661
    It does not matter if you are on a 600 or a 1000, what counts is how much you can open the throttle a 250 cc will do 150 km plus.... so it's up to the rider not the bike.

  4. #124
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by Jerry74 View Post
    It does not matter if you are on a 600 or a 1000, what counts is how much you can open the throttle a 250 cc will do 150 km plus.... so it's up to the rider not the bike.
    A bit easier to fuck it all up on a proper thou though isn't it? I mean, 0-160 if you can keep the front down and not skid the rear up is done in first on most and in 6sec.
    A 250cc that he's on, won't do a genuine 160...and it's very, very easy to fuck it up on a thou.
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  5. #125
    Join Date
    25th August 2005 - 16:07
    Bike
    04 ZX10R 98 ZX9R #10
    Location
    Ashhurst
    Posts
    5,547
    Quote Originally Posted by Jerry74 View Post
    It does not matter if you are on a 600 or a 1000, what counts is how much you can open the throttle a 250 cc will do 150 km plus.... so it's up to the rider not the bike.
    on a 250 you have ALLL that time while it gets there to think about how faster your going and how much faster you want to go

    on a 1000 the bike already left.

    thats the difference.

    Nearly all men can stand adversity and hard time, but if you want to test a mans true character, give him power....
    YouTube Videos
    MY PICTURES

    Best place to stay in Hawkes Bay here

  6. #126
    Join Date
    31st August 2005 - 12:00
    Bike
    2018 GSXS1000
    Location
    Temple View
    Posts
    5,042
    Blog Entries
    1
    Quote Originally Posted by dangerous View Post
    and there also is the problem... a rocky, dampness, debri... ohhh oh light up, side step, high side so the 600 has a more forgiving reaction cos it never lit up.
    they do, and when they light up they do it well cause all the power is at the top!

  7. #127
    Join Date
    1st February 2004 - 11:00
    Bike
    several
    Location
    out west
    Posts
    9,594
    Quote Originally Posted by schrodingers cat View Post
    Yes! No! No! Yes!

    Mate, please yourself. Pay your money and make your choice.

    If you drop it, don't post here admitting it....
    Ya see I look at it as a misrable old cunt that I am... his money, his choice... in the case he wipes out OUR money in the form of acc, Im all for restrictions. It fucks me off paying masive acc levies yet I have never claime (not saying one day I might)
    cheers DD
    (Definately Dodgy)



  8. #128
    Join Date
    3rd April 2010 - 16:22
    Bike
    2000 Aprilia RSV Mille,
    Location
    ChCh
    Posts
    896
    Quote Originally Posted by dangerous View Post
    Ya see I look at it as a misrable old cunt that I am... his money, his choice... in the case he wipes out OUR money in the form of acc, Im all for restrictions. It fucks me off paying masive acc levies yet I have never claime (not saying one day I might)
    Fair enough. You've spoken sensibly and given good reasons to step up gradually. I guess I sorta think its all got as much to do with attitude as cc's
    "I don't like it, and I'm sorry I ever had anything to do with it." -- Erwin Schrodinger talking about quantum mechanics.

  9. #129
    Join Date
    1st December 2010 - 09:00
    Bike
    Bigger one
    Location
    Palmerston North
    Posts
    41
    So if a jump from 250 to 1000 is discouraged by many, why then would the law allow the new learners max cc rating to be 650? I know the bikes will be detuned, but still to go from those who are entering the motorcycle journey who have NO past experience to go straight to a 650cc (ish) bike? Seems far, far worse to jump straight from 0cc to 650cc then it is from 250 to 1000cc.

    Assuming that there will be a large group of people whose first bike is the maximum cc rating they can buy.

    All I know is that they are catering for those who are super large/big to fit on a 250cc bike (which they currently cater for by giving exemptions), and also to discourage people to upgrade..

  10. #130
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by carver View Post
    they do, and when they light up they do it well cause all the power is at the top!
    It takes more to light a 600 up...it has less power and less torque, usually a fair bit less stress on the tyre too.
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  11. #131
    Join Date
    10th August 2008 - 18:24
    Bike
    Suzuki RF600R
    Location
    Christchurch
    Posts
    661
    Fully agreed on above posts, but a 600 cc does not carry 160+ hp at the rear wheel generally.

    From what the new licence laws seem to point to it will be the types of bikes like is available in aussie, ER6N, Gladius, CB600 etc.

    Personally I went from 250 to 800 cc so it's how ya ride not how many ponys are available.

  12. #132
    Join Date
    24th September 2008 - 01:32
    Bike
    a shiny new(ish) one
    Location
    Dunedin
    Posts
    3,650
    Quote Originally Posted by zmlam View Post
    So if a jump from 250 to 1000 is discouraged by many, why then would the law allow the new learners max cc rating to be 650? I know the bikes will be detuned, but still to go from those who are entering the motorcycle journey who have NO past experience to go straight to a 650cc (ish) bike? Seems far, far worse to jump straight from 0cc to 650cc then it is from 250 to 1000cc.

    Assuming that there will be a large group of people whose first bike is the maximum cc rating they can buy.

    All I know is that they are catering for those who are super large/big to fit on a 250cc bike (which they currently cater for by giving exemptions), and also to discourage people to upgrade..
    firstly, when the OP asked about a 600 vs a thou, most assumed they were talking about th R6/R1 or ZX6r/ZX10r, so lets clarify that there are LOTS of 600+ bikes with only modest power.

    secondly, the up-to 650cc bikes that learners will be allowed to ride will NOT include the R6, ZX6, GSXR6, etc etc.
    so I defer to the last line of your first paragraph - IMO it is safer to get on a GT650 as a first bike, than it is to go from a VT250 to an R1/ZX10r.
    the prior is a bike of modest power, with plenty of ballast, it wont just wheelie all by itself when you get on the gas, you need to make some sort of concerted effort to get the front wheel sky-bound. a zx10/r1, will wheelie and do a full loop WAY before you hit redline if you give the gas a quick squirt, and that is the difference.

    If the OP was looking at going to a 1340 Harley, or an SV thou, or something like that, there probably wouldnt be quite such an excited 'Fuck no, Youll DIE' response, but as it is, the presumption has been that the OP wants to go straight to the ZX10r. which is probably a correct assumption.

    Someone else mentioned I think on the last page, that attitude plays and equal or greater part than cc's when it comes to upgrading your bike

  13. #133
    Join Date
    19th April 2009 - 18:52
    Bike
    SF
    Location
    Hamiltron
    Posts
    1,847
    Quote Originally Posted by zmlam View Post
    So if a jump from 250 to 1000 is discouraged by many, why then would the law allow the new learners max cc rating to be 650? I know the bikes will be detuned, but still to go from those who are entering the motorcycle journey who have NO past experience to go straight to a 650cc (ish) bike? Seems far, far worse to jump straight from 0cc to 650cc then it is from 250 to 1000cc.

    Assuming that there will be a large group of people whose first bike is the maximum cc rating they can buy.

    All I know is that they are catering for those who are super large/big to fit on a 250cc bike (which they currently cater for by giving exemptions), and also to discourage people to upgrade..
    The LAMS bikes are based on power:weight. You can't just ride any 650cc bike. The ones on the list are relatively slow.

    Doh, tigertim beat me to it

  14. #134
    Join Date
    2nd February 2008 - 15:59
    Bike
    Roadstar 1600 & Royal Star Venture
    Location
    Wellington
    Posts
    2,076
    Quote Originally Posted by zmlam View Post
    So if a jump from 250 to 1000 is discouraged by many, why then would the law allow the new learners max cc rating to be 650? I know the bikes will be detuned, but still to go from those who are entering the motorcycle journey who have NO past experience to go straight to a 650cc (ish) bike? Seems far, far worse to jump straight from 0cc to 650cc then it is from 250 to 1000cc.

    Assuming that there will be a large group of people whose first bike is the maximum cc rating they can buy.

    All I know is that they are catering for those who are super large/big to fit on a 250cc bike (which they currently cater for by giving exemptions), and also to discourage people to upgrade..
    For example a 650 single (DR650, XT660 etc) actualy have no more power (hp), than a mid power 250, although they may have a slightly higher top speed. If you (sorry to rot on about the past, but.....) look at a 650 from the late 1960's? in fact a Honda Hornet (popular 250) is about as fast. I posted earlier, one HUGE difference is, a modern 600 is as FAST as a 1000cc of the 1970's and even faster in many cases. Bike technology, tyre technology etc have marched on exponentialy, rider training, rider ability and rider evolution have not.
    Maybe you are right, it could discourage people from upgrading, is that a terrible thing? If a person buys a 650 and find it suits their neeeds perfectly? Bloody fantastic! There are those of us who would love to see a 'stepped' licencing system. I have yet to see a real 'logical' arguement against it. There are plenty of emotive ones.. freedom/choice/my right..... but they are NOT logicaly positioned or rationaly arguable ones.
    If I have a concern over LAM's? it is the weight factor for a new biker. Most 250's are forgiving of errors due to lightness and 'flickability' to correct a bad line through a corner for example. A 600 is not as light to flick about. I do hope that the old 2T 350/400's etc are not part of LAM's.... I know there are many of us 'fucking old bastards who don't know shit'!!! who rode 500 H1's, RD400/350's, NS400, RG4/500's etc and know they are in no way learner friendly.
    If the road to hell is paved with good intentions; and a man is judged by his deeds and his actions, why say it's the thought that counts? -GrayWolf

  15. #135
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by steve_t View Post
    The LAMS bikes are based on power:weight. You can't just ride any 650cc bike. The ones on the list are relatively slow.

    Doh, tigertim beat me to it
    I think the 650 twins are restricted in order to meet the power/weight also.

    None of the LAMS bikes are "fast" or unsuitable for a learner, unless you get a ZZR400 and plop a ZZR600 motor in it, like I did last year.
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •