Wellingtonians going to Tokoroa? (Waitangi weekend)

**Dutchee** · 31st January 2012, 06:21

Originally Posted by ajturbo

George was out racing with his daughter the other day (if that is who you mean).. i was able to over take his daughter..

(this time )
his last lot of Kemo last week..

you talk of pressure... just you wait till i over take you on sunday..!!!
the elbow will go out, fingering your kill switch... yeah who's ya daddy?

but on the serious side, i am unsure if hel's and Malcom will be able to fit my bike in...

I'm sure we'll be able to figure a bike out for you to ride. You'll be in A grade, so won't be overtaking me (who doesn't anyway, unless you mean the kid on the tricycle who can't even walk yet, but he doesn't count, he's been overtaking me for years).

Yeah that George. Had expected him to post whether he was coming or not affter Friday, but guess we'll find out later in the week or on the weekend.

Sheesh, I was keen to head home Sunday, but it's starting to sound like maybe not.

**ajturbo** · 31st January 2012, 06:39

ok... looks like i will have to be there now...
A grade??? me??? hahahahahahahaha

**Str8 Jacket** · 31st January 2012, 07:12

Originally Posted by ajturbo

but on the serious side, i am unsure if hel's and Malcom will be able to fit my bike in...

Won't know until we try!

**Str8 Jacket** · 31st January 2012, 07:14

Originally Posted by Dutchee

Sheesh, I was keen to head home Sunday, but it's starting to sound like maybe not.

We're going to stay in SmellyVegas on Sun night......

**marktd** · 31st January 2012, 15:57

i dont mind sharing my bike long as you dont mind 2 stroke

**F5 Dave** · 2nd February 2012, 14:17

Hi - you wgtn bitches are picking up some tyres for me via the great bucket courier service. Pretty please & hugs & kisses, damn, maybe I shouldn't have started with 'Bitches'.

too late now, I'll try to cover my tracks with some singing, no drinking, no hold on

From Esquire Biddle & should hopefully be coming down to the Toke. Ideally if the Alicetown crew could squeeze them into the van that would be awesome.

**Dutchee** · 2nd February 2012, 18:23

I hope the Alicetown mob will be able to squeeze your tyres in the van, as they're meant to be bringing tyres up for us lol (is this wierd or what, us buying from Wellington, you buying from Auckland).

**koba** · 2nd February 2012, 19:06

Originally Posted by Dutchee

I hope the Alicetown mob will be able to squeeze your tyres in the van, as they're meant to be bringing tyres up for us lol (is this wierd or what, us buying from Wellington, you buying from Auckland).

That is sooo terarded.

**Clivoris** · 3rd February 2012, 14:16

Have a great weekend peeps. I think I'm waving a flag at Manfeild.

**F5 Dave** · 3rd February 2012, 15:08

Originally Posted by Dutchee

I hope the Alicetown mob will be able to squeeze your tyres in the van, as they're meant to be bringing tyres up for us lol (is this wierd or what, us buying from Wellington, you buying from Auckland).

yeah but I'm after Dunlops & Kyle had Bridgies so I might as well flow against the tide, but I like the Dunnies.

**TZ350** · 3rd February 2012, 15:54

I am getting a pipe kitset from Wobbly and a piston of ebay to rebore the 3 ex port cylinder but it wont make any more power, or power spread than the current single ex port and RS pipe setup unless I can increase the inlet port time area.

Click image for larger version.

Name: 11 Bar Rotary Valve Design.jpg
Views: 5
Size: 245.7 KB
ID: 256544

Blairs rotary valve design program.

I am looking for 11 bar at 12,250 rpm

Click image for larger version.

Name: 10-5 Bar Rotary Valve Design.jpg
Views: 7
Size: 239.5 KB
ID: 256543

But may have to settle for 10.5 bar because of the phyisical limitations on how big I can make the new rotary valve and inlet.

Click image for larger version.

Name: Big Hole Rotary Valve Design.jpg
Views: 8
Size: 227.7 KB
ID: 256542

Even so it sure is going to be bigger than the original GP125 hole.

**F5 Dave** · 3rd February 2012, 16:02

Originally Posted by TZ350

I am getting a pipe kitset from Wobbly and a piston of ebay to rebore the 3 ex port cylinder but it wont make any more power, or power spread than the current single ex port and RS pipe setup unless I can increase the inlet port time area.

Blairs rotary valve design program.

I am looking for 11 bar at 12,250 rpm

But may have to settle for 10.5 bar because of the phyisical limitations on how big I can make the new rotary valve and inlet.

Even so it sure is going to be bigger than the original GP125 hole.

ahh, Senility has finally set in Rob.

**TZ350** · 3rd February 2012, 17:21

Eeeek posted that on the wrong thread ........

**Dutchee** · 5th February 2012, 18:53

Just got to say, those that missed coming down, don't worry, we all had a miserable time, we really didn't have too much fun, booze and racing. Oh, and we didn't have a great Sarah cake either. There were absolutely no incidents at all, no bikes expired, nothing happened.
Basically, nothing to see here, move right along

Damn white screeen. That should read those that didn't come down/up/across

**Rick 52** · 5th February 2012, 20:54

Originally Posted by Dutchee

Just got to say, those that missed coming down, don't worry, we all had a miserable time, we really didn't have too much fun, booze and racing. Oh, and we didn't have a great Sarah cake either. There were absolutely no incidents at all, no bikes expired, nothing happened.
Basically, nothing to see here, move right along

Damn white screeen. That should read those that didn't come down/up/across

I agree nothing going on .......well some oil then cement oh and port ....bits of ally ....broken plastic ....