View Poll Results: Legal or not?

Voters
33. You may not vote on this poll
  • XR100/CRF100/CRF150F ALL LEGAL

    18 54.55%
  • XR100/CRF100 LEGAL CRF150F ILLEGAL

    6 18.18%
  • XR100/CRF100/CRF150 ALL ILLEGAL

    3 9.09%
  • DONT KNOW

    6 18.18%
Page 2 of 7 FirstFirst 1234 ... LastLast
Results 16 to 30 of 102

Thread: Is it Bucket legal or not?

  1. #16
    Join Date
    9th October 2008 - 15:52
    Bike
    RSV4RR, M109R, ZX10R
    Location
    wellington
    Posts
    6,165
    Blog Entries
    1
    Quote Originally Posted by koba View Post
    The Loncin is generally accepted on the basis that it is a Honda CG? 150 clone.

    I'm not sure about the CMG, yeah the lines do seem a bit fuzzy. Best bet is to not piss about arguing for marginal cases and take up a platform that is indisputable. The engines that attract regular debate tend to be non-competitive lumps of poop anyway so why bother?
    Yeah i understand im just keen to ride something motard style and at that price its just some wheels which I have a front already and some teflon away from riding.
    I have evolved as a KB member.Now nothing I say should be taken seriously.

  2. #17
    Join Date
    26th April 2006 - 12:52
    Bike
    Several
    Location
    Hutt Valley
    Posts
    5,134
    Quote Originally Posted by mossy1200 View Post
    Yeah i understand im just keen to ride something motard style and at that price its just some wheels which I have a front already and some teflon away from riding.
    It's quite astounding how light a proper MX 125 rolling chassis is, a reasonable bike can be made out of one with appropriate rims. Not sure what you would pick one up for ($) though. Maybe cheap(ish) with a blown motor?

    You could buy such a bike but it would be real stink to rock up after putting a whole lot of effort into it to find it isn't considered legal.
    You are unlikely to be told to piss off in such a case but still; a legal bike is best for all concerned.
    The other thing to consider is the patchy quality of Chinese built machines.
    Yeah, sure the Brits said the same thing about the Japs once but I've seen some really crap products from some of the Chinese factories. Loncin has proven to be reasonable and up to the task in most cases, just a fair bit under-powered compared to modern 4-valve platforms.
    Heinz Varieties

  3. #18
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,405
    Blog Entries
    2
    Quote Originally Posted by kel View Post
    Legal, along with all its after market add on goodies to take it up to 19hp
    Attachment 262251

    Illegal
    Attachment 262252

    Dont shoot the messenger, I didnt write the rules
    that won't make 19hp with legal aftermarket goodies &/or without increasing the capacity to over F5 limit.

    Look I'm conflicted. The F5 class is down on numbers so I do want it to survive, after all I'd have to change my name to F4 Dave & it just wouldn't have the same ring (+ F5 button refreshes the screen, go on push it).

    XR range were an Enduro model back in the day, although it doesn't look like it now, but people raced the 200s & 250s & even 500s heaven help them, in serious Enduros against PEs ITs KDXs & whatever else.

    The 100s though were aimed at kids. the engines of the earlier ones were pretty bum basic.

    But couldn't tell you what a CRF/CRF F were. Maybe people MX race them. Who knows?
    Don't you look at my accountant.
    He's the only one I've got.

  4. #19
    Join Date
    20th July 2010 - 07:56
    Bike
    RS/KE125, PW50
    Location
    Auckland
    Posts
    1,305
    Quote Originally Posted by F5 Dave View Post
    that won't make 19hp with legal aftermarket goodies &/or without increasing the capacity to over F5 limit.
    Sure it will.
    "Engines must be derived from non-competition motorcycles. Motocross, Road Racing, Enduro and Go Kart motors and transmission parts are not permitted"
    Bidalot offer a bolt up kit for 19hp. Sure the kit was designed with racing in mind but it is a bolt up kit for a road going non-competition motorcycle, hence the Dip's run metrakit setups which are perfectly legal. Its only a matter of time until a 19hp 50 turns up on the track, the bridged exhaust port RG50 will then be relegated to fight it out with the XR100's

  5. #20
    Join Date
    17th July 2003 - 13:20
    Bike
    450
    Location
    in the sunshine
    Posts
    1,296
    Quote Originally Posted by F5 Dave View Post
    XR range were an Enduro model back in the day, although it doesn't look like it now, but people raced the 200s & 250s & even 500s heaven help them, in serious Enduros against PEs ITs KDXs & whatever else.

    The 100s though were aimed at kids. the engines of the earlier ones were pretty bum basic.

    But couldn't tell you what a CRF/CRF F were. Maybe people MX race them. Who knows?
    Must have been a number of years ago that an XR was raced in enduro's. When did the PE & IT stop being produced? Early/Mid 80's.

    CRF100 - are Kids/Fun (Im guessing an XR100 rebranded as you cant buy a new XR100)
    CRF150F - are a Trail bike
    CRF150R RB - is the MX bike.

    The trail bike/fun/kids bikes are the air cooled motors, the RB is the liquid cooled bike.

    http://www.honda-motorcycles.co.nz/B...d-recreational

    What else do you do to save F5 class? Buggered if I know.

  6. #21
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,405
    Blog Entries
    2
    Quote Originally Posted by Shorty_925 View Post
    Must have been a number of years ago that an XR was raced in enduro's. When did the PE & IT stop being produced? Early/Mid 80's.
    About when the rules were concocted as we know them now.
    Don't you look at my accountant.
    He's the only one I've got.

  7. #22
    Join Date
    7th September 2009 - 09:47
    Bike
    Yo momma
    Location
    Podunk USA
    Posts
    4,561
    I am really bloody sick and tired of these wankers that are trying to twist the rules or the wording of the rules or looking for loopholes in the rules just so they can enter (or sell) some sort of gray area machine. This is supposed to be a fun AND competitive class. It is not the world championships or something like the Americas Cup which was fucked up by that wanker Michael Fay and his lawyers when they found a 'loophole' in the rules and it has never been the same since.
    How about buy a LEGAL ready built bucket or, for fucks sake buy an FXR and race that! It is not that hard to do it properly and still be completely within the rules. In the long run it will cost less, be less trouble, you will find heaps of advice from other racers for free and you wil not have anyone questioning the legality of your machine. And when you are done with your legal machine there will always be a buyer for it. It is not as if the rules need to be opened up because of lack of entries (like in the late 90's) or because one particular type of machine is totally dominant.
    The presant rules work just fine as they are.
    Just my opinion, no offense intended.
    Last edited by jasonu; 20th April 2012 at 06:05. Reason: Jack Daniels fired rant

  8. #23
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,405
    Blog Entries
    2
    Quote Originally Posted by kel View Post
    Sure it will.
    "Engines must be derived from non-competition motorcycles. Motocross, Road Racing, Enduro and Go Kart motors and transmission parts are not permitted"
    Bidalot offer a bolt up kit for 19hp. Sure the kit was designed with racing in mind but it is a bolt up kit for a road going non-competition motorcycle, hence the Dip's run metrakit setups which are perfectly legal. Its only a matter of time until a 19hp 50 turns up on the track, the bridged exhaust port RG50 will then be relegated to fight it out with the XR100's
    I think you're on drugs, unless you are having the 's' argument on Motors then it is clearly a competition engine part.

    Personally I would never buy a hot up cylinder, I think that is far too close to grey area, maybe I am too conservitive, but to the D's credit they are not racing parts, they are sold as road going big bore cyclinders.

    My poor old RG one has one exhaust port.
    Don't you look at my accountant.
    He's the only one I've got.

  9. #24
    Join Date
    7th September 2009 - 09:47
    Bike
    Yo momma
    Location
    Podunk USA
    Posts
    4,561
    Quote Originally Posted by F5 Dave View Post

    My poor old RG one has one exhaust port.
    And so do they all (except one that I know of)

  10. #25
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,405
    Blog Entries
    2
    Yeah I think Kel was assuming mine was so equiped. Think I got shown that barrel in a dirt floored basement in west Auckland. Along with the 1 water entry no exit DS80LC
    Don't you look at my accountant.
    He's the only one I've got.

  11. #26
    Join Date
    23rd November 2003 - 21:16
    Bike
    big red one, rgv's, kdx's
    Location
    Wellington
    Posts
    690
    Quote Originally Posted by jasonu View Post
    I am really bloody sick and tired of these wankers that are trying to twist the rules or the wording of the rules or looking for loopholes in the rules just so they can enter (or sell) some sort of gray area machine. This is supposed to be a fun AND competitive class. It is not the world championships or something like the Americas Cup which was fucked up by that wanker Michael Fay and his lawyers when they found a 'loophole' in the rules and it has never been the same since.
    How about buy a LEGAL ready built bucket or, for fucks sake buy an FXR and race that! It is not that hard to do it properly and still be completely within the rules. In the long run it will cost less, be less trouble, you will find heaps of advice from other racers for free and you wil not have anyone questioning the legality of your machine. And when you are done with your legal machine there will always be a buyer for it. It is not as if the rules need to be opened up because of lack of entries (like in the late 90's) or because one particular type of machine is totally dominant.
    The presant rules work just fine as they are.
    The FXR doesnt help the shortage of good f5 machines about. F4 has an unlimitied supply of loncin engines and a healthy stable of fxr's available.
    At one stage wasnt there debate about the legality of the fxr?

  12. #27
    Join Date
    4th January 2009 - 21:08
    Bike
    YLR150RR and a RD350LC
    Location
    Not far from Ruapuna
    Posts
    2,368
    Quote Originally Posted by Timber020 View Post
    The FXR doesnt help the shortage of good f5 machines about. F4 has an unlimitied supply of loncin engines and a healthy stable of fxr's available.
    At one stage wasnt there debate about the legality of the fxr?
    Yes there was a question about the FXR legality, when the capacity limit was 140cc, that got fixed .

    Is F5 limited by the supply of bikes, or just that most people prefer the bigger F4 bikes ?

    A bit like pre 82 numbers falling while pre 89 grows, just the riders preference.

    there are plenty of classes competing in the small bike stakes F5, F4, Steetstock, 250 twins, then the junior posties, 125s. I guess F5 just fell off the radar
    My neighbours diary says I have boundary issues

  13. #28
    Join Date
    23rd November 2003 - 21:16
    Bike
    big red one, rgv's, kdx's
    Location
    Wellington
    Posts
    690
    Quote Originally Posted by Yow Ling View Post
    Yes there was a question about the FXR legality, when the capacity limit was 140cc, that got fixed .

    Is F5 limited by the supply of bikes, or just that most people prefer the bigger F4 bikes ?

    A bit like pre 82 numbers falling while pre 89 grows, just the riders preference.

    there are plenty of classes competing in the small bike stakes F5, F4, Steetstock, 250 twins, then the junior posties, 125s. I guess F5 just fell off the radar
    If your after a bike that fits f5 rules, is less than a grand but has the brakes/engine/frame that will make a good bucket racer for your average guy wanting to race, what would you choose?

  14. #29
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    Quote Originally Posted by jasonu View Post
    I am really bloody sick and tired of these wankers that are trying to twist the rules or the wording of the rules or looking for loopholes in the rules just so they can enter (or sell) some sort of gray area machine. This is supposed to be a fun AND competitive class. It is not the world championships or something like the Americas Cup which was fucked up by that wanker Michael Fay and his lawyers when they found a 'loophole' in the rules and it has never been the same since.
    How about buy a LEGAL ready built bucket or, for fucks sake buy an FXR and race that! It is not that hard to do it properly and still be completely within the rules. In the long run it will cost less, be less trouble, you will find heaps of advice from other racers for free and you wil not have anyone questioning the legality of your machine. And when you are done with your legal machine there will always be a buyer for it. It is not as if the rules need to be opened up because of lack of entries (like in the late 90's) or because one particular type of machine is totally dominant.
    The presant rules work just fine as they are.

    All valid arguments if you are talking about F4 and yes I have an FXR or two in the shed. Now please point me at the F5 equivalent of an FXR, and it isn't an RG50, they seem as rare as hens teeth these days, if they weren't I'd have two by now.

  15. #30
    Join Date
    17th February 2008 - 17:10
    Bike
    gp125 rg50 rs125hybrid
    Location
    Helensville
    Posts
    2,882
    Blog Entries
    2
    Quote Originally Posted by Henk View Post
    All valid arguments if you are talking about F4 and yes I have an FXR or two in the shed. Now please point me at the F5 equivalent of an FXR, and it isn't an RG50, they seem as rare as hens teeth these days, if they weren't I'd have two by now.
    cb100
    cl100

    I think E.S.E have a few in the back of the shed

    looks like the crf100 is a kids bike

    Looking like your favourite MX hero has never been easier with the CRF100F.
    It packs all the great off-road features most families need - 4 stroke power,
    low seat height, plush suspension and edgy CRF graphics.




    and the crf150f is a trail bike so both LEGAL ?


    Big enough to keep experienced adults entertained but small and light for beginner riders.
    With a modest 826mm seat height, ultra-reliable engine and great handling chassis,
    the CRF150F redefines off-road fun.


    *Front and rear carrier are optional extras




    thecrf150r is an mxbike

    These highly charged racing machines are designed for truly ground breaking performance.
    They feature Unicam engines, race ready suspension and track-designed chassis -
    the ideal tool for fun-filled exhilaration.
    "Instructions are just the manufacturers opinion on how to install it" Tim Taylor of "Tool Time"
    “Saying what we think gives us a wider conversational range than saying what we know.” - Cullen Hightower

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •