Page 2 of 7 FirstFirst 1234 ... LastLast
Results 16 to 30 of 103

Thread: New Ohlins gas cartridges

  1. #16
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by CHOPPA View Post
    Judging by those fork caps they look like they would bolt straight in to my BMW....
    A bit of Swede with German produces great looking blue eyed blonde haired beautiful people! Poms and Germans dont mix anywhere near as well.

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  2. #17
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Marmoot View Post
    So it's bad and not recommended for old people's joints?
    No , I like working with the technology much moreso than riding. Incidentally I ride ( test ride ) many different motorcycles every week as part of my proffession. Just dont feel any need to do so for recreation, any more.

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  3. #18
    Join Date
    4th April 2007 - 15:04
    Bike
    Kawasaki ZX6R
    Location
    Massey, Auckland
    Posts
    1,918
    Quote Originally Posted by Robert Taylor View Post
    No , I like working with the technology much moreso than riding. Incidentally I ride ( test ride ) many different motorcycles every week as part of my proffession. Just dont feel any need to do so for recreation, any more.
    And its dangerous!

  4. #19
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Biggles08 View Post
    And its dangerous!
    So at this point I will put in a plug for Arai helmets and Alpinestars leather ( with armour in key places ), affording the best possible protection should the unthinkable happen.

    I was test riding today when an R1 pulling a near vertical mono for at least 300 metres came past at higher speed. That should be reserved for the racetrack and away from an audience that will likely view unfavourably. And if anyone had come out of a side gate this guy would have easily been cleaned out as he was not in a position of reserve to take avoiding action.

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  5. #20
    Join Date
    21st October 2005 - 20:58
    Bike
    2014 Honda NC750X
    Location
    West Auckland
    Posts
    3,478
    Quote Originally Posted by Robert Taylor View Post
    So at this point I will put in a plug for Arai helmets and Alpinestars leather ( with armour in key places ), affording the best possible protection should the unthinkable happen.

    I was test riding today when an R1 pulling a near vertical mono for at least 300 metres came past at higher speed. That should be reserved for the racetrack and away from an audience that will likely view unfavourably. And if anyone had come out of a side gate this guy would have easily been cleaned out as he was not in a position of reserve to take avoiding action.
    That shenanigans is usually reserved for GSXR riders.....

  6. #21
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by quickbuck View Post
    That shenanigans is usually reserved for GSXR riders.....
    And fighter pilots, prior to the Air Strike Force being callously disbanded by an ugly butch lesbian pacifist moron with crooked teeth

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  7. #22
    Join Date
    15th February 2004 - 11:00
    Bike
    Honda CBR600RR9
    Location
    Invercargill
    Posts
    750
    Quote Originally Posted by Robert Taylor View Post
    So at this point I will put in a plug for Arai helmets and Alpinestars leather ( with armour in key places ), affording the best possible protection should the unthinkable happen.

    I was test riding today when an R1 pulling a near vertical mono for at least 300 metres came past at higher speed. That should be reserved for the racetrack and away from an audience that will likely view unfavourably. And if anyone had come out of a side gate this guy would have easily been cleaned out as he was not in a position of reserve to take avoiding action.
    Did he have gold clickers?

  8. #23
    Join Date
    13th February 2004 - 06:46
    Bike
    Forza 155 SE Pit Bike
    Location
    Wellington
    Posts
    11,471
    Quote Originally Posted by Robert Taylor View Post
    I was test riding today when an R1 pulling a near vertical mono for at least 300 metres came past at higher speed. That should be reserved for the racetrack and away from an audience that will likely view unfavourably. And if anyone had come out of a side gate this guy would have easily been cleaned out as he was not in a position of reserve to take avoiding action.
    Spoken like one jealous of not being able to perform a mingin' wheelie themselves
    Vote David Bain for MNZ president

  9. #24
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by White trash View Post
    Spoken like one jealous of not being able to perform a mingin' wheelie themselves
    No, just a much better sense of self preservation, many could learn from that! And respect for the customers property.

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  10. #25
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by Maido View Post
    Did he have gold clickers?
    No, which is why he was probably pulling a wheelie, to keep the chatter sticks off the road surface

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  11. #26
    Join Date
    13th February 2004 - 06:46
    Bike
    Forza 155 SE Pit Bike
    Location
    Wellington
    Posts
    11,471
    Quote Originally Posted by Robert Taylor View Post
    No, just a much better sense of self preservation, many could learn from that! And respect for the customers property.
    Oh on a CUSTOMERS bike, that shit's not on. I'd spew if some dickhead was doing better wheelies than me on my own bike.
    Vote David Bain for MNZ president

  12. #27
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by White trash View Post
    Oh on a CUSTOMERS bike, that shit's not on. I'd spew if some dickhead was doing better wheelies than me on my own bike.
    I love you White Trash!

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  13. #28
    Join Date
    9th January 2005 - 22:12
    Bike
    Street Triple R
    Location
    christchurch
    Posts
    8,393
    Quote Originally Posted by White trash View Post
    Oh on a CUSTOMERS bike, that shit's not on. I'd spew if some dickhead was doing better wheelies than me on my own bike.
    best. post. ever.

    make him wear your helmet and jacket and get some photos. "Oh yeah, thats me"
    I thought elections were decided by angry posts on social media. - F5 Dave

  14. #29
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,254
    Quote Originally Posted by Robert Taylor View Post

    I was test riding today when an R1 pulling a near vertical mono for at least 300 metres came past at higher speed.
    twas probably Dukie out for a squirt

  15. #30
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,254
    Quote Originally Posted by Robert Taylor View Post
    And fighter pilots,
    Ditto................

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •