2 stroke engines from Thailand

[Ric]

Yep, KR150, If you see any find out what the availability and $ are please, There are casting numbers on the bottom of the cylinders, 1779, 1855 and 18?? might be 1828

RG150 as well if there are any, there are heaps of RG150's in the south island, would be more if there was some more engines

Are there any water cooled 100cc versions of KR's?

I saw some KR's yesterday. The casting no's were 1779, 1724 and 1855. The engine is about $NZ170, or can get cylinder head and barrel for $90 pre shipping cost.

[Ric]

Don't they have 2.5-3.5 17' wheels?



Kawasaki AR80 LC???

Ric; I'd be interest in any TZR/TZM/TD?? 125/150 engine bits.

Some tzr and tzm 150's available. Engine about $NZ 160. Cylinder head and barrel $NZ 85 before freight costs.

[husaberg]

Some tzr and tzm 150's available. Engine about $NZ 160. Cylinder head and barrel $NZ 85 before freight costs.

What sort of money gets you a NSR150 engine or bottom end?

[Farmaken]

Hey I`m interested in the Suzook trs/trz 125`s

Cheers ken

[Ric]

What sort of money gets you a NSR150 engine or bottom end?

I'll find out about the nsr's for you.

[Ric]

Hey I`m interested in the Suzook trs/trz 125`s

Cheers ken

There are afew around. What are you looking for?

[Farmaken]

Complete engine and/or top end - what is the difference between the two ??( tsr vs trz ) or is that Drz in which case I like the two stroke trs , cheers.

[Ric]

Complete engine and/or top end - what is the difference between the two ??( tsr vs trz ) or is that Drz in which case I like the two stroke trs , cheers.

Doesn't seem to be much difference in trz and trs. Maybe 1 was slightly earlier than the other. The heads look a little different but I'll try and find out if they're interchangable, because it'll suit me if they are.

[Ric]

Are there any KR150 engines available?

Kips or Super Kips power valve

I went down the other day a I can get those valves for about $20 (maybe haggle for a bit less) but how do you know if they're working or not?

[Ric]

the Kawasaki AR80 might interest the Two stroke developers.
AS too the Suzuki RGV125's (Pre1995-1997; with the USD forks).

Have seen a few rgv 150's but haven't seen any 125's or USD forks yet.

[Ric]

Don't forget the Suzuki FXR/Raider 150 while you are there Cheers.

Haven't seen any FXR's yet but will keep looking.

[Ric]

I think you will find there is quite a nice little market here for KR150 and RG150 (maybe not as much as 3-5 years ago).. Especially Barrels,head, cranks and maybe even carbs.

17' wheels could also be useful; but from memory most little bikes over there have real skinny wheels. Did the honda NS-1 ever make it that far south>???

Crankshafts around $35, Carbs about $20

[Ric]

Keep an eye out for any NSR150's or NSR125 would ya if the price is right.

NSR's have only seen 150's. RC valves around $20.

[Ric]

I'll find out about the nsr's for you.

About $160 for the engine but shipping may not be easy. Crank about $35 bits and pieces fairly cheap

[Henk]

FXRs use the same engine as the 150 raider if that helps.