CBR150 motors

[jasonu]

Will it fit in an NX4 .......................

That is the plan.
Shorter front to back than the KE cases so will fit further back. It is quite a bit taller but hopefully the NX4 spars will be wide enough. If it won't fit then it will be put up for sale on a website near you (for more than the price stated below, still have to pay to get it to Noo Zulland)

so what kind of money did it cost you over there

$400USD delivered to my door.
They were never sold here. Some guy imported it from Thailand for a project that never happened and put it on ebay which is where I came along.

[husaberg]

That is the plan.
Shorter front to back than the KE cases so will fit further back. It is quite a bit taller but hopefully the NX4 spars will be wide enough. If it won't fit then it will be put up for sale on a website near you (for more than the price stated below, still have to pay to get it to Noo Zulland)

if this f-er fits in and the CRF250 do to with some case work. the 150 should slip in.
http://www.pit-lane.biz/t2753-techni...ssis-aluminium

pop it in your hand luggage would ya........ lol

[jasonu]

pop it in your hand luggage would ya........ lol

That has already been seriously considered (and rejected)

So is that actually a CRF250 engine???

[husaberg]

That has already been seriously considered (and rejected)

So is that actually a CRF250 engine???

Ya wimp Boote used to bring a compete (Albeit stripped down) TZ750 on international flights he even used to ask strangers to carry other bits of it to avoid excess bagage charges.
I guess the US border Security might have been beefed up a bit since then

i think it is a Bmw450 but not sure?,, my french is no good but bw is mentioned a lot.
if you go to the nova gearbox site in the uk you will see the changes they make to fit the 250 into the NX4
there are other threads about as well.

[seymour14]

That is the plan.


$400USD delivered to my door.
They were never sold here. Some guy imported it from Thailand for a project that never happened and put it on ebay which is where I came along.

Excellent price, that's a steal!

[Rick 52]

It was a bit tight and water pipes would need changing, too much work for me !

[jasonu]

It was a bit tight and water pipes would need changing, too much work for me !

NX4 spars are a fair bit wider than your NF4
Motor weighs 24.5kg. Anyone know what a FXR motor weighs???

[richban]

NX4 spars are a fair bit wider than your NF4
Motor weighs 24.5kg. Anyone know what a FXR motor weighs???

FXR stock is 28kg.

[Yow Ling]

Just had my CBR on the dyno,


might be the most conservative dyno in the country !! 14.28hp

[koba]

Just had my CBR on the dyno...

Is that your home built dyno?

Standard CBR?

[koba]

Oh, now I read the test notes...

[jasonu]

FXR stock is 28kg.

What does your bike weigh?

[jasonu]

Just had my CBR on the dyno,


might be the most conservative dyno in the country !! 14.28hp

My info says they make around 19hp at the crank standard so your result is not far off the mark.

[crazy man]

My info says they make around 19hp at the crank standard so your result is not far off the mark.

a stock fxr 150 on my old dyno jet years ago was 14.3 hp so what you have there wound be close. nice graft think l may have to get the program as you

[husaberg]

a stock fxr 150 on my old dyno jet years ago was 14.3 hp so what you have there wound be close. nice graft think l may have to get the program as you

Are you not interested in a free one........http://freespace.virgin.net/dyno.power/download.htm

http://freespace.virgin.net/dyno.power/burgerbar.htm

Awesome work to Mike.....