Page 6 of 21 FirstFirst ... 4567816 ... LastLast
Results 76 to 90 of 310

Thread: A new brand of chinese "sports bikes"?

  1. #76
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Quote Originally Posted by Edbear View Post
    True dat, just make sure you put the brakes on first or you might break it.
    Only break I had what when after a break, after the brakes didn't kick in, in time.
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  2. #77
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Reading this thread. I can't help but feel that Kiwibikers have turned into a bunch of pussies.
    Looking back at past bikes;

    - Some had shoddy brakes
    - Some had shoddy tires
    - Some had cracked welds
    - Some were deformed
    - Clutch cables broke
    - Gear levers bent
    - Low-sided crawlers
    - Intake issues
    - dangerous at high-speed
    - Headset bearings shot
    - Wheel bearings shot
    - Chain loose
    - Sprockets shot
    - Brakes not bled
    - Brakes always bleeding
    - bits broken off leaving nasty catch points
    - Lights that failed......

    and truck loads more.

    But you know what - I had such a grand time with these buckets / POS / Rolling wrecks that it taught me how to ride with known problems.

    So put down the hi-viz, think about the pile of shit you learnt to ride on - and those key skills you learnt because it was a pile of shit.

    Otherwise give up you bike, buy a volvo and become your dad.
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  3. #78
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    Quote Originally Posted by speights_bud View Post
    Most people probably think I'm being an ass.
    Me second invite, following you're continued and completely ignorant public slamming of the bikes I was importing, would be to get you into the shop in order to kick your face in...

    But that's just me.

  4. #79
    Join Date
    9th March 2012 - 08:46
    Bike
    YZF-R6
    Location
    Christchurch
    Posts
    453
    The only problem I have with the idea of these bikes is I can't find out who actually makes them, it is quite obviously not sven himself and I can't find any reference to them anywhere but this Christchurch based website, if they are a reasonable quality product then surely they are imported by other people than just this one guy and to other countries than NZ, there are a couple of Chinese manufacturers out there that with time and experience should be able to atleast equal the quality of hyosung like cfmoto and a few others that seem to be concentrating on the dirt/pit bike market.
    But this manufacturer is doing nothing to build an international reputation.
    I'm in no hurry to go buy a non Japanese motor vehicle but there are plenty out there that are, just look at all the Hyodungs getting around, and all the Korean cars out there, some people just have to have things new and don't look at the quality, it's fine by me, keeps the used bike prices down as far as I can tell.

  5. #80
    Join Date
    15th December 2007 - 16:56
    Bike
    Dog Rooter
    Location
    King Country
    Posts
    803
    So for $750 more I could buy a brand spanking new GW250. The mind boggles that anyone would buy one of these things.

  6. #81
    Join Date
    4th January 2009 - 21:08
    Bike
    YLR150RR and a RD350LC
    Location
    Not far from Ruapuna
    Posts
    2,368
    Quote Originally Posted by chasio View Post
    So for $750 more I could buy a brand spanking new GW250. The mind boggles that anyone would buy one of these things.
    So where are these GW250's made? Indonesia, Thailand, malaysia, probably anywhere but Japan.
    I think the decent thing to do here rather than sounding like Winston Peters at a grey power meeting would be give Sven and Matt a call and borrow a bike to do a few laps off the back of the 250 grid at levels in 2weeks.

    some of you guys got onto a rely small perceived problem with the gear lever spline, anyone remember the vt250? safe enough but had a chocolate engine, we don't know if these are good or bad, give them a chance to build a reputation ,good or bad.
    My neighbours diary says I have boundary issues

  7. #82
    Join Date
    22nd September 2009 - 22:02
    Bike
    2001 SV400s
    Location
    Sanson
    Posts
    451
    Quote Originally Posted by chasio View Post
    So for $750 more I could buy a brand spanking new GW250. The mind boggles that anyone would buy one of these things.
    Which is made in..... guess where?!

    China
    Yeah, nah.

  8. #83
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    Quote Originally Posted by huff3r View Post
    Which is made in..... guess where?!

    China
    I was gonna let it go for a little while, before I pointed that out fuck ya!

  9. #84
    Join Date
    18th February 2005 - 10:16
    Bike
    CT110 Super Cub - postie bike
    Location
    Christchurch
    Posts
    3,123
    Check it out. This, plus a bit of paperwork, is how easy it is to become a importer of Chinese motorcycles... . http://guoweimotor.en.made-in-china.com/
    Grow older but never grow up

  10. #85
    Join Date
    7th July 2009 - 07:38
    Bike
    fluoro mess
    Location
    west is best
    Posts
    414
    china can produce quality, its like anywhere else - you get what you pay for.

    its a shame they have to build such blatant rip offs / stomp all over IP though. not referring to this bike in particular, just talking in general
    Education not Legislation

  11. #86
    Join Date
    9th March 2012 - 08:46
    Bike
    YZF-R6
    Location
    Christchurch
    Posts
    453
    Quote Originally Posted by Oakie View Post
    Check it out. This, plus a bit of paperwork, is how easy it is to become a importer of Chinese motorcycles... . http://guoweimotor.en.made-in-china.com/
    I want one of these, but with a bit more rake on the front and a taller sissy bar though. easy rider?

  12. #87
    Join Date
    15th February 2005 - 15:34
    Bike
    Katanasaurus Rex
    Location
    The Gates of Delirium
    Posts
    9,020
    Quote Originally Posted by Drew View Post
    I was gonna let it go for a little while, before I pointed that out fuck ya!
    There's a huge difference between products manufactured in China under strict quality controls imposed by the parent companies and products manufactured cheaply and distributed by Chinese companies though.

    Shark helmets have a factory in China but would you wear a Chinese brand helmet that you'd never heard of before?

  13. #88
    Join Date
    19th January 2013 - 16:56
    Bike
    a 400 and a 650 :-)
    Location
    The Isthmus
    Posts
    1,603
    Quote Originally Posted by Glowerss View Post
    While not one of these dodgy little 250s, it seems China is starting to produce some quality bikes.

    http://www.trademe.co.nz/motors/moto...tion-610491046. is the first Chinese big bike i've seen. It's a total copy of kawasakis ER6n, but by most accounts it's a fairly well built machine. And it costs as much as a hyodung 250.

    http://www.motorcyclistonline.com/fi...k/viewall.html is an aussie article on it.

    I've seen it in the flesh, and while it was only a quick peek, the thing looked OK. It looked fairly decent actually.

    Personally, I welcome the chinese and hope they can introduce some QC into their goods. Bike prices here are stupid, and if the Chinese can eventually produce it similar quality for less, than I'm all for it.

    *edit, spotted they have these too http://www.trademe.co.nz/motors/moto...-591512345.htm . Lot of kit for the price. Not a bad looking tourer either.
    Did you have a look at what else they are selling through the same showroom? all on the same corner site? Or for that matter on their TradeMe page?
    Doubt if they'd want to be tarred with the "selling garbage" tar brush...

  14. #89
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by Mushu View Post
    all the Korean cars out there, some people just have to have things new and don't look at the quality, it's fine by me, keeps the used bike prices down as far as I can tell.
    Hyundai have been building excellent cars for some time now, I've had a lot of experience with them and they, for some time, made much better cars than the equivalent priced Jap car. Even Kia are building nicer stuff now.
    Hyosung is a bit meh though, nothing wrong with them really, nothing special about them, which is exactly what they're designed to do.


    I'm legally blind in one eye, yet have less one eyed vision than most of you latte drinking FIAT owners
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  15. #90
    Join Date
    15th February 2005 - 15:34
    Bike
    Katanasaurus Rex
    Location
    The Gates of Delirium
    Posts
    9,020
    Quote Originally Posted by ducatilover View Post
    Hyundai have been building excellent cars for some time now, I've had a lot of experience with them and they, for some time, made much better cars than the equivalent priced Jap car.
    Do you remember what they were like in 1985?

    (And besides, Hyundai are Korean).

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •