Page 4 of 4 FirstFirst ... 234
Results 46 to 55 of 55

Thread: GT650R won't fire?

  1. #46
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,235
    Quote Originally Posted by Confrontation View Post
    I found the worksheet they did , it was saying they couldnt balance the rear carb , maybe a vacuum issue.
    they're only putting a measuring instrument on it to check the vacuum, so there's something wrong in this area if they can't balance them, dunno what it should be but it should be even, i'm surprised they can't give you a scenario on why not.
    Not sure about Hyodungs on fuel tap suction, usually bikes have access points on more than one pot and with a longer pipe it can be changed, still doesn't negate you bad balance though
    have you thought about a one way trip to a dunedin wharf, and a taxi home? make sure you pay cash for the taxi and wear a Maori Burkha (Balaclava) and don't post it on KB

  2. #47
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,235
    Quote Originally Posted by Drew View Post
    If you had one, we would be.
    I've never been married, I haven't made the same mistake once!

  3. #48
    Join Date
    28th March 2013 - 17:54
    Bike
    Hyosung GT250R
    Location
    New Zealand
    Posts
    54
    I got a feeling the bike stop outside my drive becos it only had enough gas in the carbs to get it that far , I told the bike shop that and they said bring it back in. so we shell see.......

  4. #49
    Join Date
    19th January 2006 - 19:13
    Bike
    mutton dressed up as lamb and a 73 XL250
    Location
    On any given sunday?
    Posts
    9,032
    Quote Originally Posted by jellywrestler View Post
    are we still talking about wives here???
    Key word here is "obey".
    Be the person your dog thinks you are...

  5. #50
    Join Date
    2nd August 2004 - 12:45
    Bike
    Eeyore
    Location
    Otago
    Posts
    704
    So the problem was ??????
    If it rains on your parade, use the umbrella of eternal optimism

  6. #51
    Join Date
    28th March 2013 - 17:54
    Bike
    Hyosung GT250R
    Location
    New Zealand
    Posts
    54
    Quote Originally Posted by Motig View Post
    So the problem was ??????
    Well after taking it back to the shop I was told it was a fucked spark plug ( that was just days old , and cost 30$ ) also he took of the rear cam cover , cam housing and cam followers to find a colic had popped out.

    From there I have had a friend check and refit all the velves in the rear head , i have just put the head back on the bike (after waiting for the gasket to turn up from the states)
    only for it not to fire up again....

    I took the tank off , sprayed some engine start in and the bike fired up , so now Im thinking its a fuel problem.

    i cant feel any air coming out the vacuum.

    any ideas people?

  7. #52
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    Vacuum line to th fuel tap? The little hose is the vacuum one.

  8. #53
    Join Date
    13th March 2006 - 20:49
    Bike
    TF125
    Location
    Hurunui, FTW!
    Posts
    4,430
    Quote Originally Posted by Confrontation View Post
    Well after taking it back to the shop, I was told it was a fucked spark plug (that was just days old , and cost $30). Also he took of the rear cam cover, cam housing and cam followers to find that a collet had popped out.

    From there I have had a friend check and refit all the valves in the rear head. I have just put the head back on the bike (after waiting for the gasket to turn up from the states), only for it not to fire up again...

    I took the tank off, sprayed some engine start in and the bike fired up, so now I'm thinking its a fuel problem.

    I can't feel any air coming out the vacuum.

    Any ideas people?
    Air doesn't normally come out of a vacuum line, it goes in. Just like the hose on a vacuum cleaner really.

    Another suggestion might be to go back to school & learn how to spell.

  9. #54
    Join Date
    28th March 2013 - 17:54
    Bike
    Hyosung GT250R
    Location
    New Zealand
    Posts
    54
    Quote Originally Posted by Madness View Post
    Air doesn't normally come out of a vacuum line, it goes in. Just like the hose on a vacuum cleaner really.

    Another suggestion might be to go back to school & learn how to spell.

    I don't need to know how to spell , and fuck you.

  10. #55
    Join Date
    13th March 2006 - 20:49
    Bike
    TF125
    Location
    Hurunui, FTW!
    Posts
    4,430
    Quote Originally Posted by Confrontation View Post
    I don't need to know how to spell , and fuck you.
    You really do you know. You're welcome

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •