KTM200 throttle stuck?

[KTM200/stevo0987]

So today i was out riding and i wheelied through a knee deep puddle and the front came down fast but when i landed i noticed i was suddenly flying up the hill towards the fence but lucky i have practiced this scenario before, as i heard 2 stroke throttles (ktm in particular) getting stuck but yea i turned the bike off and started it up again and rode home with it stuck on quarter throttle id say and i dont know what to do now...missing out on ken fells because of it .. i figured tomorrow i will take the tank/seat off and have a look whats going on.. anyone know what i should look for and do?
Cheers

[noobi]

Please include punctuation in your sentences. You are likely to get more responses if people can actually follow what you're saying.

The KTM throttle sticking on is common, its most likely that the cable got caught on something and jammed it part way on. Just check that its not getting hung up on the carb or the throttle housing. Its common because of the stupid stock routing of the cable, going in front of the bars means it can more easily get caught on the bar clamps when turning or whatever.

I fixed it by using a longer cable routed behind the bars, which is also captive at both ends so it can not be pulled out.

[KTM200/stevo0987]

Please include punctuation in your sentences. You are likely to get more responses if people can actually follow what you're saying.

The KTM throttle sticking on is common, its most likely that the cable got caught on something and jammed it part way on. Just check that its not getting hung up on the carb or the throttle housing. Its common because of the stupid stock routing of the cable, going in front of the bars means it can more easily get caught on the bar clamps when turning or whatever.

I fixed it by using a longer cable routed behind the bars, which is also captive at both ends so it can not be pulled out.

Sorry man lol im taking the bike up to Kaiwaka Suzuki someday this week and see if they can sort it out. im not very mechanical and i need a bunch of other stuff done on the bike. and i have exams at the moment so dont have anytime to do it

[KTM200/stevo0987]

I found out what it was.. after Ruakaka practice i took my bike for a ride and sucked abit of sand through the air filter and got stuck in the carb. cleaned it out and runs fine

[Pornstar]

I found out what it was.. after Ruakaka practice i took my bike for a ride and sucked abit of sand through the air filter and got stuck in the carb. cleaned it out and runs fine

YUK! how much sand got into the engine?

[ktm84mxc]

He only noticed after water crossing so the sand got mixed with the water , instant grinding paste it's now in the engine going up and down a few thousand times before stopping .
Instant hone at best or over bore at worst, only way to be sure lift the head to check bore and piston/rings.
Wait for the question how much for a new barrel or do I re plate ?

[KTM200/stevo0987]

i hope none but i will find out soon with a dent in the bank account im guessing

[Jay GTI]

Yeah I wouldn't worry too much, that's a typical KB "The sky is about to fall on your head, mate" diagnosis. If it's running fine, it's probably fine.

[KTM200/stevo0987]

Yeah I wouldn't worry too much, that's a typical KB "The sky is about to fall on your head, mate" diagnosis. If it's running fine, it's probably fine.

Haha its running better than it ever has