Bucket bits 4 sale

**davebullet** · 22nd December 2013, 08:36

Originally Posted by mr bucketracer

are they rd50 forks ? maybe keen if they are

Sorry i dont know. They were a donation so passing on the love.

**John_H** · 27th December 2013, 16:43

http://www.grabonestore.co.nz/motorcycle-paddock-stand

**Ivan** · 28th December 2013, 10:36

got this cpi gtr150 fourstroke watercooled direct drive scooter for sale got 17 inch rim and a 16 inch rear disc brakes etc could be worth it for someone derigistered fucked big end bearing 100$ located in wairarapa

**TZ350** · 28th December 2013, 10:49

I would like it and am holding my hand up.

So ... Ok its 4T and 12hp but its water cooled and CVT with big wheels 17&16, this thing has possibilities. 100cc, supercharged, 17"s all round Ooooo what excitement.

Just got to get it from the Wairarapa to Tammers or Tokoroa for on shipment to Auckland.

**husaberg** · 28th December 2013, 10:50

i was just sending you a link Rob FAF

**quallman1234** · 29th December 2013, 14:20

Anyone after a VJ22 roller?

http://www.trademe.co.nz/Browse/List...x?id=679532922

I know the kid who's selling it, should be able to get it much cheaper than that. Its okay, not perfect but completely useable.

**Rick 52** · 29th December 2013, 17:38

great little starter Honda twin, if John Conner had aything to do with it, It will go well !!
http://www.trademe.co.nz/motors/moto...-679559477.htm

**boostin** · 6th January 2014, 11:15

http://www.trademe.co.nz/Browse/List...x?id=682233143

**boostin** · 6th January 2014, 11:16

$1 Res Trade Me Auction

http://www.trademe.co.nz/Browse/List...x?id=682240457

**John_H** · 6th January 2014, 20:13

http://www.kiwibiker.co.nz/forums/sh...-space-no-time

**speights_bud** · 15th January 2014, 15:40

Interested in a swap/deal for Dirtbike, 250 2T prefered but will consider anything offered

Originally Posted by speights_bud

-NSR MC-16 Frame & Swingarm.
-CBR250R forks and 17" wheels.
-Lightweight Aluminium rear sub frame & 125GP fairing. (ex Jaden Hassan)
-Lightweight Hydraulic Mountain Bike brake & disc on Rear.
-Loncin 150 standard Crate motor. (only 3 meetings old)
-XR200 Carb. (Comes with 30mm Pumper Carb ready to fit)
-125GP slicks
-Legit Carbon fibre Rear hugger.
-Complimentary grubby handprints on paintwork.

98% complete, brakes need some work, comes with other calipers & master cylinder spares etc. Also could do with a good going over on the Nylon, the track here wasn't as fussy as elsewhere...

93kg with fuel when weighed at Taumarunui.

Can deliver between Napier/Wellington/Hamilton/Paeroa in the coming weeks.

**rapid van cleef** · 15th January 2014, 15:56

Ive got an old gl 145 honda sitting in my shed that i want rid of. Its pretty much a non runner at the moment. I bought it to strip down and rebuild but ive had it now for almost 2 years and all ive done is take off the exhaust, kick starter and centre stand. Non of the elctrics work, no clocks etc. Its a had a prettyhard life. Im down in Whakatane. If anyone wants it, let me know. I do get to auckland/ taupo now and again with track days so could maybe put it in the van but want a guarantee of someone collecting it at the other end. Give me enough to warrant squeezing it in the van and im happy....within reason...maybe the chasis would be good for a bucket build? I di have a brand new gasket kit for it which i bought.

**quallman1234** · 17th January 2014, 09:05

Anyone interested in a TF125 Engine? 6 Speed version.
Been sitting for a while, but had it in a frame not too long ago and it runs. Comes with your Choice of chamber.
Have a YZ85 or a RGV250 one laying around.
Its pretty mint, comes with carbs/electrics. Everything to make it run. Completely stock standard.

Offers yo'.

**John_H** · 17th January 2014, 14:26

Originally Posted by quallman1234

Anyone interested in a TF125 Engine? 6 Speed version.
Been sitting for a while, but had it in a frame not too long ago and it runs. Comes with your Choice of chamber.
Have a YZ85 or a RGV250 one laying around.
Its pretty mint, comes with carbs/electrics. Everything to make it run. Completely stock standard.

Offers yo'.

Wow could this fit in a VJ22 frame he he!

**husaberg** · 17th January 2014, 18:42

Originally Posted by quallman1234

Anyone interested in a TF125 Engine? 6 Speed version.
Been sitting for a while, but had it in a frame not too long ago and it runs. Comes with your Choice of chamber.
Have a YZ85 or a RGV250 one laying around.
Its pretty mint, comes with carbs/electrics. Everything to make it run. Completely stock standard.

Offers yo'.

Never knew they did a 6 speed TF125?
what are the ratios like?