Sidecar Racing

[peril 787b]

Fuck knows, some relay that had power in but no power coming out, pump shit itself as well last meeting

Quick connect under the tank, my dick would flow more than that thing

That would be the tip over switch, factory fitting in the two wheeler that stops the pump should it end upside down. It ought to be glued /siliconed up inside (as in a sidecar the forces acting upon it are different).

Strange that the quick connect has crapped out, you know it needs the connection in to flow? Not that it's an issue now that it's no longer in place.

[nodrog:Me]

I think Ella needs a tip over switch

[Shaun Harris]

[QUOTE=peril 787b;1130778236]That would be the tip over switch, factory fitting in the two wheeler that stops the pump should it end upside down. It ought to be glued /siliconed up inside (as in a sidecar the forces acting upon it are different).


I would imagine the tip over sensor NOT SYLICONED UP as you suggest to be useless on a Chair from my experience on one with all the motion they have that bikes do not have

[Drew]

We just took the pendulum out of ours.

[Shaun Harris]

We just took the pendulum out of ours.

shit, u do actually have a brain, or borrowed a good one from some where

[peril 787b]

I would imagine the tip over sensor NOT SYLICONED UP as you suggest to be useless on a Chair from my experience on one with all the motion they have that bikes do not have

Shut up Shaun, it needs to be stopped from swinging as the centripetal force acting upon a sidecar (as it does not lean over) makes the switch cut the power to the fuel pump.
If you actually read what I posted, I had said IT OUGHT TO BE GLUED UP, so your post was, as usual, totally unnecessary.

[Shaun Harris]

Shut up Shaun, it needs to be stopped from swinging as the centripetal force acting upon a sidecar (as it does not lean over) makes the switch cut the power to the fuel pump.
If you actually read what I posted, I had said IT OUGHT TO BE GLUED UP, so your post was, as usual, totally unnecessary.

fuk you also, I totally agreed with you fool

[peril 787b]

How have you not yet realized that NO-ONE appreciates your input?

[Shaun Harris]

How have you not yet realized that NO-ONE appreciates your input?

Have you and them not realised that I do not give a fuk man, and this is all about filling in time for me

[sidecar bob]

I think Ella needs a tip over switch

She already has one, it just has'nt been glued up properly.

[Kickaha]

That would be the tip over switch, factory fitting in the two wheeler that stops the pump should it end upside down. It ought to be glued /siliconed up inside (as in a sidecar the forces acting upon it are different).

Strange that the quick connect has crapped out, you know it needs the connection in to flow? Not that it's an issue now that it's no longer in place.

It isn't the tip over switch, that's already been checked

Quick connect was plugged in when Kai tested the flow, he took the hose off somewhere downstream of it

[scrivy]

She already has one, it just has'nt been glued up properly.

I heard Kai hasn't 'plugged it in' lately.......

[Kickaha]

http://www.steveenglish.com/forum/vi...p?f=45&t=52769

HERE FOR SALE IS LEWIS BLACKSTOCK AN PADDY ROSNEY'S F2 IRESON

THIS IS A VERY COMPETITIVE MACHINE AT CLUB LEVEL

2010 GSXR 600 ENGINE
TONY BAKER SUMP
POWER COMMANDER 5
AUTO TUNE
DYNO JET QUICKSHIFTER
EM PRO KIT LOOM
COMES WITH 6 WHEELS (3 SLICKS/3WETS)
ALL SPROCKETS/ETC

£8000 ONO
ANY QUESTIONS PLEASE GET IN TOUCH
LEWIS 07808 704176
PADDY 07715 860462

[Grumph]

That one appears to have enough tank capacity to do a complete NZ season....And while it looks good, leaving the frame bare probably means polishing it weekly to stay in front of the rust.
And don't tell me it's clear coated as I can point to a couple of frames here which are visibly rusting under the clear....

[Drew]

That one appears to have enough tank capacity to do a complete NZ season....And while it looks good, leaving the frame bare probably means polishing it weekly to stay in front of the rust.
And don't tell me it's clear coated as I can point to a couple of frames here which are visibly rusting under the clear....

The reason for bare steel is because it has to be like that for inspection. You're not allowed a painted frame.