Page 16 of 35 FirstFirst ... 6141516171826 ... LastLast
Results 226 to 240 of 524

Thread: The 50

  1. #226
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017
    [QUOTE=husaberg;1130840756]That pic actually looks a lot what a Air cooled Cr80 is like, Not saying its right, but that's how they are.........


    My friend Jenne shared these with me, 17bhp on the dyno ( I have a picture and a video of the bike and it's impressive )
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	fast 50.jpg 
Views:	59 
Size:	91.2 KB 
ID:	309821   Click image for larger version. 

Name:	fast 50 2.jpg 
Views:	62 
Size:	91.8 KB 
ID:	309822  

  2. #227
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017

    looks like a bike

    50 back together, still have one hose to connect and a battery to buy and fit, it's proper buckety plus the shock is shot and I have to buy one before the GP
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0464.jpg 
Views:	47 
Size:	585.7 KB 
ID:	309904  

  3. #228
    Join Date
    18th May 2007 - 20:23
    Bike
    RG50 and 76 Suzuki GP125 Buckets
    Location
    Auckland
    Posts
    10,530
    Love the wasp paint scheme.

  4. #229
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,335
    Blog Entries
    2
    Top stuff. See you at Tok.
    Don't you look at my accountant.
    He's the only one I've got.

  5. #230
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017

    all fired up

    Well it started fairly easily although I had to put it in 4th to get the thing turning.
    It ran well enough until the thing starved out, I'll have to take the carb back off and check out why.

  6. #231
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017

    house of pain

    I arrived at the house of pain with hope in my heart and a shit load of work done to the bike. On the dyno it went and we did 3 or 4 pulls with the jetting I'd guessed at.
    OOh nearly 14 at the wheel (13.8 I think) , it felt a bit fluffy so jetted up and it was rubbish so jetted down and it was rubbish, put it back to where we started and it was rubbish. Tee Zee sent me home to see if the piston had smeared or the ring had snagged.
    Went home a bit angry as been working like a sand boy for weeks and I'd blown it up first go. ( tho not unhappy with the BHP )

    Stripped it down the second I got home and ....................... nothing wrong with the internals at all, everything looks as good as when it was assembled ?
    did a bit more digging around and found the HT lead was just hanging on to the cap, fixed that and also made sure the earths were all paint free, reassembled the bar steward put it in gear, span the wheel and off she went. Sounds fine so buggered if I know, we'll see what happens at Toke, glad I have an F4 to ride in toke cup as hate not racing due to issues with the bike.

  7. #232
    Join Date
    2nd July 2013 - 11:52
    Bike
    GPR150
    Location
    palmertson north
    Posts
    2,389
    i liked it better when it was making 19.5 hp

  8. #233
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017
    Quote Originally Posted by mr bucketracer View Post
    i liked it better when it was making 19.5 hp
    me too but the works Kreidler I borrowed the dyno chart from lives in the UK with it's owner

  9. #234
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    Climb on a sidecar as well on Saturday, collect the whole set.
    Stock is best

  10. #235
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017
    Quote Originally Posted by Henk View Post
    Climb on a sidecar as well on Saturday, collect the whole set.
    I'll drive but my swinging days are over

  11. #236
    Join Date
    2nd July 2013 - 11:52
    Bike
    GPR150
    Location
    palmertson north
    Posts
    2,389
    Quote Originally Posted by cotswold View Post
    me too but the works Kreidler I borrowed the dyno chart from lives in the UK with it's owner
    lol around 14hp is a very good start . well done

  12. #237
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,335
    Blog Entries
    2
    Do you know how many years it took me to get to 14hp? And to stay there was hard I had a tickle less last year. You've done well.
    Don't you look at my accountant.
    He's the only one I've got.

  13. #238
    Join Date
    18th May 2007 - 20:23
    Bike
    RG50 and 76 Suzuki GP125 Buckets
    Location
    Auckland
    Posts
    10,530
    Quote Originally Posted by cotswold View Post
    I arrived at the house of pain with hope in my heart and a shit load of work done to the bike. On the dyno it went and we did 3 or 4 pulls with the jetting I'd guessed at.
    OOh nearly 14 at the wheel (13.8 I think) , it felt a bit fluffy so jetted up and it was rubbish so jetted down and it was rubbish, put it back to where we started and it was rubbish. Tee Zee sent me home to see if the piston had smeared or the ring had snagged.Went home a bit angry as been working like a sand boy for weeks and I'd blown it up first go. ( tho not unhappy with the BHP )

    Stripped it down the second I got home and ....................... nothing wrong with the internals at all, everything looks as good as when it was assembled ?
    did a bit more digging around and found the HT lead was just hanging on to the cap, fixed that and also made sure the earths were all paint free, reassembled the bar steward put it in gear, span the wheel and off she went. Sounds fine so buggered if I know, we'll see what happens at Toke, glad I have an F4 to ride in toke cup as hate not racing due to issues with the bike.
    Click image for larger version. 

Name:	Tim NSR50.JPG 
Views:	71 
Size:	243.2 KB 
ID:	310160

    There you go ....

    Click image for larger version. 

Name:	NSR red line.JPG 
Views:	87 
Size:	233.9 KB 
ID:	310161

    Some other 50's that have been on the dyno recently, the NSR is the red line.

  14. #239
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017

    thanks Rob

    Quote Originally Posted by TZ350 View Post
    Click image for larger version. 

Name:	Tim NSR50.JPG 
Views:	71 
Size:	243.2 KB 
ID:	310160

    There you go ....

    Click image for larger version. 

Name:	NSR red line.JPG 
Views:	87 
Size:	233.9 KB 
ID:	310161

    Some other 50's that have been on the dyno recently, the NSR is the red line.
    Thanks very much Robert, just have to hope the cap was the issue

  15. #240
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017

    a little head

    This turned up in the mail today ( thanks Roger )
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0506.jpg 
Views:	41 
Size:	296.8 KB 
ID:	310649   Click image for larger version. 

Name:	IMG_0505.jpg 
Views:	45 
Size:	403.4 KB 
ID:	310648  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •