Page 1 of 3 123 LastLast
Results 1 to 15 of 42

Thread: 1986 GSX550EF front fairing

  1. #1
    Join Date
    27th February 2005 - 08:47
    Bike
    a red heap
    Location
    towel wronger
    Posts
    6,522

    1986 GSX550EF front fairing

    I'm after a small headlight fairing like the one on the Robert holden bike, and a right hand side fairing, oh and a front guard.

    oh and a master cylinder.

  2. #2
    Join Date
    5th January 2007 - 14:58
    Bike
    motocompo
    Location
    Buttfuck nowhere
    Posts
    5,156
    The Robert Holden bike being the number 3 bike in this clip.
    https://m.youtube.com/watch?v=_M34QX5oqSM

  3. #3
    Join Date
    4th November 2003 - 13:00
    Bike
    BSA A10
    Location
    Rangiora
    Posts
    12,846
    Quote Originally Posted by nodrog View Post
    oh and a master cylinder.
    Front or rear and what size?
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough power."


    Quote Originally Posted by scracha View Post
    Even BP would shy away from cleaning up a sidecar oil spill.
    Quote Originally Posted by Warren Zevon
    Send Lawyers, guns and money, the shit has hit the fan

  4. #4
    Join Date
    27th February 2005 - 08:47
    Bike
    a red heap
    Location
    towel wronger
    Posts
    6,522
    Quote Originally Posted by Kickaha View Post
    Front or rear and what size?
    Front, fucked if I know what Size they are, probably the same as a 750 or 1100.

  5. #5
    Join Date
    13th June 2010 - 17:47
    Bike
    Exercycle
    Location
    Out in the cold
    Posts
    5,867
    Wouldn't surpise me if Eurodave has moulds for that fairing.

  6. #6
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,236
    that was the fire breathing alcohol burning bike, not so easy as those bikes only had two carbs. the last time i saw that bike was in a cold kiwi hill climb, Warren Turner still has it.
    the master cylinder might be the same as an early GSX750 ESD

  7. #7
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,236
    Quote Originally Posted by nodrog View Post
    Front, fucked if I know what Size they are, probably the same as a 750 or 1100.
    often it's the angle of the handlebars that matters.

  8. #8
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,236
    Quote Originally Posted by nodrog View Post
    I'm after a small headlight fairing like the one on the Robert holden bike, and a right hand side fairing, oh and a front guard.

    oh and a master cylinder.
    sidecover or fairing?

  9. #9
    Join Date
    4th November 2003 - 13:00
    Bike
    BSA A10
    Location
    Rangiora
    Posts
    12,846
    Quote Originally Posted by nodrog View Post
    Front, fucked if I know what Size they are, probably the same as a 750 or 1100.
    Well what fucking size is that? I have a couple in a drawer here somewhere

    Two or four piston calipers?
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough power."


    Quote Originally Posted by scracha View Post
    Even BP would shy away from cleaning up a sidecar oil spill.
    Quote Originally Posted by Warren Zevon
    Send Lawyers, guns and money, the shit has hit the fan

  10. #10
    Join Date
    27th February 2005 - 08:47
    Bike
    a red heap
    Location
    towel wronger
    Posts
    6,522
    Quote Originally Posted by jellywrestler View Post
    sidecover or fairing?
    sidecover bit that goes under seat.

    Quote Originally Posted by Kickaha View Post
    Well what fucking size is that? I have a couple in a drawer here somewhere

    Two or four piston calipers?
    the bikes not here yet so I haven't even seen it, it doesn't have any discs or calipers on it either, but they were a twin disc, 2 piston set up I think.

  11. #11
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,236
    Quote Originally Posted by nodrog View Post
    sidecover bit that goes under seat.



    the bikes not here yet so I haven't even seen it, it doesn't have any discs or calipers on it either, but they were a twin disc, 2 piston set up I think.
    is that the one from hunterville?

  12. #12
    Join Date
    27th February 2005 - 08:47
    Bike
    a red heap
    Location
    towel wronger
    Posts
    6,522
    Quote Originally Posted by jellywrestler View Post
    is that the one from hunterville?
    yeah.

    is this the bit where you tell me its fucked and its only good for a paper weight?

  13. #13
    Join Date
    27th February 2005 - 08:47
    Bike
    a red heap
    Location
    towel wronger
    Posts
    6,522
    I think the front headlight fairing I need is this shape?

    http://www.classicandracebike.co.uk/...e-for-sale.htm

  14. #14
    Join Date
    5th January 2007 - 14:58
    Bike
    motocompo
    Location
    Buttfuck nowhere
    Posts
    5,156

  15. #15
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,236
    long shot, try asking the guy where he got it from, it was hawera i think, he brought it for a midget car or something and had no interest in the brakes, they may stilll be lying in a shed somewhere.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •