Bucket update

[Slingshot]

Hehe, just about fucked Slingshot's bucket good. No way is he beating me now.

Did I say that out loud?

Don't worry...when the dodgy welding lets go, the engine will fall out and take you out....then I'll be able to do Flintstone styles across the finish line!

You'll be

I'll be

[ajturbo]

you would be thinking the so called GP racer are gona be fuck good i bet!! $5 ill beat at less one of them! heheheh

i wish someone would teach mudboy how to friggin spell!!!!!!!

[ajturbo]

Don't worry...when the dodgy welding lets go, the engine will fall out and take you out....then I'll be able to do Flintstone styles across the finish line!

You'll be

I'll be

this is only IF christine LETS you pass.........

by the way skunk... bring that sprocket
and if any one has a 12/13/ tooth front sprocket that will fit a CB125... can they bring that also please

[Nasty]

i wish someone would teach mudboy how to friggin spell!!!!!!!

Try his DAD!!

[ajturbo]

Try his DAD!!

Nooooooooooooooooooooooooooo... not that....
not the face

NOT THE FACE!!!!!!!!!!!!!!

[Sully60]

this is only IF christine LETS you pass.........

by the way skunk... bring that sprocket
and if any one has a 12/13/ tooth front sprocket that will fit a CB125... can they bring that also please

I've got a selection of cb125t sprockets and if you speak to me nicely I'll let you use one.

[Slingshot]

Looks like I'm gonna be racing tomorrow.

Big thanks to Skunk & AJTurbo for all of the work that you both put in to make this happen!

Wasp...thanks for grinding that thing...what ever it was.

Sketchy_Racer...thanks for pointing out that we did need to connect the CDI thingy to get the motor to run.

Skunk...once again, mate...without you this would never have come together. Thanks heaps.

See you all at the track tomorrow.

[Skunk]

Skunk...once again, mate...without you this would never have come together. Thanks heaps.

Anything to get you hooked eh?

You have some MORE work to do on it too - I found the source of the clanking noise when we ran it down the drive...

T'was the chain on the engine mount bolt. AJ and I have smaller sprockets for the front that should cure it. You just have to fit one.

[Slingshot]

Anything to get you hooked eh?

You have some MORE work to do on it too - I found the source of the clanking noise when we ran it down the drive...

T'was the chain on the engine mount bolt. AJ and I have smaller sprockets for the front that should cure it. You just have to fit one.

Will it run tomorrow without having to change the sprocket first?

[Skunk]

Not quietly...

Won't take more than 10 mins to do. I'll get there early and start on it.

[Ozzy27]

Hey Guys, I'm Bringing down 3 100cc Quads for the day tomorrow got the ok from Bayden. Just looking for a few Test pilots Come over and say Hi if you are Keen for a go!
Should be totally sick if it is wet.
See ya all Tomorrow
Ozzy

[Skunk]

Hmmm, should be dry tomorrow. Do they drift?

[Ozzy27]

Only if ya keep em nailed, Bayden Had a play on one up here and had a bit of smoke doing donuts! They understeer badly if ya dont slide em!

[ajturbo]

Only if ya keep em nailed, Bayden Had a play on one up here and had a bit of smoke doing donuts! They understeer badly if ya dont slide em!

OOOOOOOOOOOOooooooooooooooooooooo

please can i have a go??

i used to race them back in the early 80's... but they were 350's(?) back then..................................

[Ozzy27]

OOOOOOOOOOOOooooooooooooooooooooo

please can i have a go??

i used to race them back in the early 80's... but they were 350's(?) back then..................................

Sure no worries Bringing down 3 bikes to see if we can get some people keen on making it a regular thing. Still got dirt tyres on them which makes riding them a hoot!