Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 37

Thread: First round of GNCC this Sat (13 October). Who's going?

  1. #16
    Join Date
    1st May 2006 - 20:22
    Bike
    08 RMZ250
    Location
    North Shore
    Posts
    1,454
    ill see you out their greg, i had a late one as well going to linkon park, what a awsome night!!!!!

  2. #17
    Join Date
    2nd October 2005 - 00:47
    Bike
    CR250
    Location
    Papamoa
    Posts
    3,993
    I'll be getting rid of Ivy and triming ourt hedge. Two very boring jobs....

  3. #18
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Well after that I've come to the conclusion that I'm not yet fit enough to tackle the Iron Man 4 hours next weekend. More than likely teaming up with a mate to do it two up. A couple of weeks off the bike didn't help, but I've only got a week to get ready for the four hours.


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  4. #19
    Join Date
    2nd October 2005 - 00:47
    Bike
    CR250
    Location
    Papamoa
    Posts
    3,993
    What is the 4 hour? where is that?

  5. #20
    Join Date
    1st May 2006 - 20:22
    Bike
    08 RMZ250
    Location
    North Shore
    Posts
    1,454
    had a blast today, 6 laps of hard riding, thought i was doing realy well, but then found out were Danger came.
    Still had a good result mid pack in the clubmans
    12 and 14 in classes that i entred.
    body was so nackered had to have a sleep at Kemeu for half an hour before heading home.

  6. #21
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Here ya go Cheesy!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	2man07.jpg 
Views:	9 
Size:	122.9 KB 
ID:	73054  


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  7. #22
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Rupecopp, did you get out there? Buddy L had a bit of a look for you.


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  8. #23
    Join Date
    21st May 2007 - 18:03
    Bike
    kx250f
    Location
    shore
    Posts
    1,616
    This was my first race and I really enjoyed it, and I've only been ridding 3-4months so there was a lot to learn. And I was more fucked by the end than I thought

    As for my result, I think David Knight will be sat at home shitting himself

  9. #24
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Buddy L, I should have got you to stop into my Wifes work with me for a Cappachino and a shortbread at Woodhills Saddlery and Feed at Waimauku. Next time maybe.


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  10. #25
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Good on you Rupe! Sorry we didn't meet up. I hope that wasn't you on the Yellow Gas Gas that I almost ran into a tree?
    Well I did give you plenty of time to pull over
    And while I was waiting for you to get out of the way (if that was you) the Ginga Ninja got by me on his KTM!


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  11. #26
    Join Date
    21st May 2007 - 18:03
    Bike
    kx250f
    Location
    shore
    Posts
    1,616
    Quote Originally Posted by Danger View Post
    Good on you Rupe! Sorry we didn't meet up. I hope that wasn't you on the Yellow Gas Gas that I almost ran into a tree?
    Well I did give you plenty of time to pull over
    Possibly (sorry if I wasn't quick enough to pull over), there was a couple other yellow gasgas riders out there, but could of been me.

    And quite a few people passed me over the 2hrs, never mind I can judge my result against next year to see if I've improved much.

    I didn't realise how much slower you go when you get knackered, by the fourth lap I was struggling to concentrate let alone stand up and attack the course. But I guess the more you ride the easier it gets.

    Oh, and I think my fork seals are leaking as there was oil/fluid on the trailer floor when I got there

  12. #27
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Oh well if you didn't hit the tree alls good!

    Give me a call if you want to get those seals sorted for next weekend.


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  13. #28
    Join Date
    1st May 2006 - 20:22
    Bike
    08 RMZ250
    Location
    North Shore
    Posts
    1,454
    were you wearing a white helmet? at all rube?
    their was a lady on a yellow gas gas, and also a guy in touring gear on a near new road rego'ed one.
    Good to here that you had a good time out their rube.
    Next time Danger. im almost ready to hit the hay, body is screwed over.

  14. #29
    Join Date
    1st May 2006 - 20:22
    Bike
    08 RMZ250
    Location
    North Shore
    Posts
    1,454
    noticed my seals were leaking very slowly so hopefully it is just a bit if grit inside the seal.
    Will have to invest in a fealer gaude? and see if i can clean it out.

  15. #30
    Join Date
    21st May 2007 - 18:03
    Bike
    kx250f
    Location
    shore
    Posts
    1,616
    Quote Originally Posted by Buddy L View Post
    were you wearing a white helmet? at all rube?
    their was a lady on a yellow gas gas, and also a guy in touring gear on a near new road rego'ed one.
    Good to here that you had a good time out their rube.
    Next time Danger. im almost ready to hit the hay, body is screwed over.
    Nah one of those black cheap vcan ones.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •