Anyone got an FXR motor for sale?

[gav]

Hi there guys, I have option on an FXR150 rolling chasis... The problem is I'd need a motor to put in it... has anyone got one surplus to requirements?

Hey Tim, I'd be interested in the FXR rolling chassis if you don't take it, I have a 1986 RG250 alloy frame complete with swingarm, shock, triple clamps, forks and tidy tank as swap or part exchange if you're interested?

[Ivan]

It's actually an XL125V Varadero.
Sold in Europe.

Displacement: 125.00 ccm (7.63 cubic inches)
Engine type: V2
Stroke: 4
Power: 14.75 HP (10.8 kW)) @ 11000 RPM
Torque: 10.50 Nm (1.1 kgf-m or 7.7 ft.lbs) @ 8500 RPM
Compression: 11.8:1
Bore x stroke: 42.0 x 45.0 mm (1.7 x 1.8 inches)
Fuel system: Carburettor. 22mm PD-type
Valves per cylinder: 2
Fuel control: SOHC
Ignition: Dual digital transistorised with electronic advance
Starter: Electric
Cooling system: Liquid
Gearbox: 5-speed
Transmission type
final drive: Chain
Clutch: Wet, multiplate with coil springs

Redlines at 12,000rpm. Don't think it would be that awesome an engine, when you consider it's an undersquare design and only SOHC and also bearing in mind that even the Loncin 150 has the same horsies but most likely lighter.
I think the FXR or CBR150 engine would be a lot better.

Just my 2c worth

I raced the first CBR 150 bucket in the country it was insanely fast and pretty much stock bar a pipe and RM80 carb

[gav]

Wait for one of the new Yamaha R125 to surface, pipe and chip change = 23 hp apparently!

[nudemetalz]

Wait for one of the new Yamaha R125 to surface, pipe and chip change = 23 hp apparently!

....and how much will it be ??????

[gav]

If you have to ask .....

[Tim 39]

wats one of these chinese ripoff xl125 motors worth?

[nudemetalz]

The Loncin is about $600 with carb and ignition. Good value.

[SHELRACING]

I put a loncin 150 in mine, you need to come up with a few mods to get it to rev. Mines had a good thrash and seems to be holding out well.

Fits in there quite nicely apart from my ratshit welding. Motor hasn't fallen out yet tho, there's a bonus.

Heres a couple of pics

Steve

[Buckets4Me]

are you coming up on sunday ????

[nudemetalz]

Looks good.

[Bren_chch]

I put a loncin 150 in mine, you need to come up with a few mods to get it to rev. Mines had a good thrash and seems to be holding out well.

Fits in there quite nicely apart from my ratshit welding. Motor hasn't fallen out yet tho, there's a bonus.

Heres a couple of pics

Steve

looks great!

[xr-rider]

Wait for one of the new Yamaha R125 to surface, pipe and chip change = 23 hp apparently!

wouldn't it be heavy aren't they a inline 4

[nudemetalz]

wouldn't it be heavy aren't they a inline 4

Nope just a single.
Here's the specs - from www.yamaha-motor-europe.com


Engine type Liquid-cooled, 4-stroke, 4-valve, single cylinder, SOHC
Displacement 124.66 cc
Bore x stroke 52.0 x 58.6 mm
Compression ratio 11.2:1
Maximum power 11.0 kW (15 PS) @ 9,000 rpm
Maximum torque 12.24 Nm (1,25 kg-m) @ 8,000 rpm
Lubrication system Wet sump
Fuel System Fuel injection
Clutch type Wet, multiple-disc coil spring
Ignition system TCI
Starter system Electric
Transmission system Constant mesh, 6-speed
Final transmission Chain
Fuel tank capacity 13.8 L
Oil tank capacity 1.15 L


Chassis -
Chassis: Steel Deltabox
Front suspension system Telescopic forks
Front travel 130 mm
Rear suspension system Swingarm (monocross)
Rear travel 125 mm
Front brake Single disc, Ø 292 mm
Rear brake Single disc, Ø 230 mm
Front tyre 100/80-17 M/C
Rear tyre 130/70-17 M/C


Dimensions -
Length 2,015 mm
Width 660 mm
Height 970 mm
Seat height 818 mm
Wheel base 1,355 mm
Minimum ground clearance 155 mm
Dry weight 126.5 kg

[SHELRACING]

Yep we're coming up Friday night, cos I need the practice on Saturday. See you there.

Steve and Ellen

are you coming up on sunday ????

[xr-rider]

Maximum power 11.0 kW (15 PS) @ 9,000 rpm
Maximum torque 12.24 Nm (1,25 kg-m) @ 8,000 rpm
Fuel System Fuel injection
Starter system Electric

Chassis -
Front brake Single disc, Ø 292 mm
Rear brake Single disc, Ø 230 mm

Dimensions -
Dry weight 126.5 kg

power and torque-rubbish
fuel injection- awesome
brakes-good size, could be helpful
weight-HEAVY