Radar mounts?

[stormy1]

I am after some advice as to where I can purchase the bits and bobs needed to mount my Beltronics STI radar awareness device? I have had a look at the radar direct website but their prices seem very much over the top.

Cheers
Dale

[Hitcher]

Look no further than Ram Solutions in Auckland. Top products, outstanding service, great prices.

[Blackbird]

Bought my mount and screamer from www.motorcycleradar.com in the USA 3 years ago. Probably still competitive, even with the exchange rate. Took 4 days to arrive from ordering it!

[Dooly]

I am after some advice as to where I can purchase the bits and bobs needed to mount my Beltronics STI radar awareness device? I have had a look at the radar direct website but their prices seem very much over the top.

Cheers
Dale

Looks like everyone in HB KB is or has got detectors!!
Which is a good thing.....

[NighthawkNZ:Me]

I am after some advice as to where I can purchase the bits and bobs needed to mount my Beltronics STI radar awareness device?

www.ramsolutions.co.nz

[Swoop]

Someone recently posted an excellent mount that was home made. A simple flat piece of sheet-metal attached to the fairing bolts and with a tab that the STi clips onto.

[alanzs]

Bought my mount and screamer from www.motorcycleradar.com in the USA 3 years ago. Probably still competitive, even with the exchange rate. Took 4 days to arrive from ordering it!

They are still very competitive. I just bought some stuff from them for my new detector.

[Blackshear]

So, if I don't have a credit card, what kinda mount will I be buying? I needs one

[alanzs]

I had my V1 on my Bandit 1200 in the cowling under the light. It was mounted with velcro and stayed in place for years. No need for anything fancy. I also had a screamer to warn me of the radar. Excellent combination...

[Blackshear]

I had my V1 on my Bandit 1200 in the cowling under the light. It was mounted with velcro and stayed in place for years. No need for anything fancy. I also had a screamer to warn me of the radar. Excellent combination...

Have any pics

[Blackbird]

Have a look at post #10 in thread: http://www.kiwibiker.co.nz/forums/sh...ad.php?t=43603. This is pretty much a typical setup . Some mounts are bar mounted like mine, some are stem mounted on the headstock and as Swoop else said, you can make a nice alloy one which is fixed to the screen bolts inside the fairing. I made one for my mate's Gixxer.