Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: Mother's Leather Conditioner

  1. #1
    Join Date
    6th June 2008 - 17:24
    Bike
    The Vixen - K8 GSXR600
    Location
    Behind keybd in The Tron
    Posts
    6,518

    Mother's Leather Conditioner

    I used this stuff after reading on here that it was OK on leathers.
    Not sure I would use it again. After doing the bizzo as per directions, I found that the trousers were much slipperier on the bike seat. First time on the seat I felt like I would slide off given half a chance...It is gradually improving but is still not as it was.
    Anyone else experienced this? Any other comments?
    . “No pleasure is worth giving up for two more years in a rest home.” Kingsley Amis

  2. #2
    Join Date
    7th October 2008 - 23:34
    Bike
    1997 Ducati 900 Superlight
    Location
    Auckland
    Posts
    152
    I have used it on my new leathers and it seemed to do some good. Maybe don't put it on the bum of your pants!!!

    I left mine leathers in the sun thinking them being warm would help it soak in and I rubbed it in with a cloth.

  3. #3
    Join Date
    11th December 2004 - 20:46
    Bike
    2018 Ducati Monster 797
    Location
    In a boot
    Posts
    5,250
    Blog Entries
    38
    I use it on all my leather gear and find it good. I like sliding about....

  4. #4
    Join Date
    3rd November 2007 - 07:46
    Bike
    KTM 1290 SDR
    Location
    Palmerston North
    Posts
    3,962
    Try some tanner's oil from a saddlery. Probably $10 per litre and leather seem's to soak it up if required. My new jacket sucked up 6 applications quick smart and pants struggled to soak up 1. Leather returns to original finish and doesn't stay shiney or slippery.
    Nunquam Non Paratus

  5. #5
    Join Date
    11th December 2004 - 20:46
    Bike
    2018 Ducati Monster 797
    Location
    In a boot
    Posts
    5,250
    Blog Entries
    38
    I've been told to be careful of saddler's oils etc as they can rot the stitching.

  6. #6
    Join Date
    3rd November 2007 - 07:46
    Bike
    KTM 1290 SDR
    Location
    Palmerston North
    Posts
    3,962
    Quote Originally Posted by Trudes View Post
    I've been told to be careful of saddler's oils etc as they can rot the stitching.
    More than likely rot through neglect! I've heard the same thing about animal fat's, neatsfoot oil, dubbin and just about every other product apart from beeswax, which I don't particularly like.
    Nunquam Non Paratus

  7. #7
    Join Date
    2nd November 2008 - 11:39
    Bike
    Blade '12
    Location
    Kapiti
    Posts
    1,373
    Quote Originally Posted by slofox View Post
    I used this stuff after reading on here that it was OK on leathers.
    Not sure I would use it again. After doing the bizzo as per directions, I found that the trousers were much slipperier on the bike seat. First time on the seat I felt like I would slide off given half a chance...It is gradually improving but is still not as it was.
    Anyone else experienced this? Any other comments?
    Mate I did exactly the same thing. It's like riding an ice cube and everytime you brake... "Holy crushed testicles Batman".

    Clean the seat and the crotch of your leathers and you'll be fine... personally I won't be making the same mistake again.

  8. #8
    Join Date
    6th June 2008 - 17:24
    Bike
    The Vixen - K8 GSXR600
    Location
    Behind keybd in The Tron
    Posts
    6,518
    Quote Originally Posted by carbonhed View Post
    "Holy crushed testicles Batman".
    Yes!!! My thoughts entirely.......
    . “No pleasure is worth giving up for two more years in a rest home.” Kingsley Amis

  9. #9
    Join Date
    13th May 2003 - 12:00
    Bike
    Thinking
    Location
    Around
    Posts
    7,383
    Use a Beeswax twice a year pre summer and pre winter, this keeps the leather nice and supple and gives it a certain amount of weather resistance also, if you dont use this kinda product after a couple of years you will notice some cracking.
    When your leathers are simply dirty (dead bugs etc) use luke warm water with a mild detergent and wipe with a damp rag until clean, once you done that then perhaps use Mothers, but dont drown your gear in it, use sparingly to give your gear a bit of a sheen again after the washing process.
    Ive run out of fucks to give

  10. #10
    Join Date
    16th September 2006 - 22:08
    Bike
    02 R1 CUSTOM
    Location
    In a house somewhere
    Posts
    275
    How do you get rid of the cracking leathers?
    I use mothers and have had no probs. Mind you I armour all my seat.
    Sport bike fun
    Motorcycle Riding Instructor
    Morgan and Wacker Motorcycle Training Centre
    Brisbane,
    Australia

  11. #11
    Join Date
    3rd July 2003 - 12:00
    Bike
    Scorpio, XL1200N
    Location
    forests of azure
    Posts
    9,398
    Quote Originally Posted by Quasievil View Post
    Use a Beeswax twice a year pre summer and pre winter, this keeps the leather nice and supple and gives it a certain amount of weather resistance also, if you dont use this kinda product after a couple of years you will notice some cracking.
    Any tips on making the arse of one's leathers a bit grippier? Low friction on the seat is good for shifting around during cornering, I guess, but that new one-piece felt like it was going to shoot my bum off the back of the bike every time I got on the gas the other weekend at Manfeild.

    Might have to put some stomp grip on the tank.
    kiwibiker is full of love, an disrespect.
    - mikey

  12. #12
    Join Date
    11th December 2004 - 20:46
    Bike
    2018 Ducati Monster 797
    Location
    In a boot
    Posts
    5,250
    Blog Entries
    38
    Quote Originally Posted by jrandom View Post
    Any tips on making the arse of one's leathers a bit grippier? Low friction on the seat is good for shifting around during cornering, I guess, but that new one-piece felt like it was going to shoot off the back of the bike every time I got on the gas the other weekend at Manfeild.
    I had the same problem with my new squidsuit, kept sliding about all over the show and ended up doing the "Too much throttle, you nickum poop" thing from slipping about at the wrong moment!

  13. #13
    Join Date
    8th January 2005 - 15:05
    Bike
    Triumph Speed Triple
    Location
    New Plymouth
    Posts
    10,256
    Blog Entries
    1
    I tried the Nikwax aqueous wax product, available from Kathmandu, and found it good on jacket and jeans. It goes on looking like low fat milk, the water part evaporates and leaves a light waxy finish. You just give the item a buff with a clean cloth to finish.

    Other people recommended Sno Seal. Actually recommended isn't strong enough, it was put so that Sno Seal was *the* answer. I found that to be too greasy on the jacket. I'd use it on boots, excluding Gore-Tex boots, but not on clothes.

    The advice about Dubbin is correct, it will rot the stitching.

    At one point I went to the saddlery shop and ordered a beeswax preparation.
    I'm still waiting...

    ArmourAll used to come with a warning that it was not to be used on control surfaces. On a bike the seat is a control surface.

    As always, ymmv.
    Last edited by pritch; 8th February 2009 at 09:02. Reason: Addition
    There is a grey blur, and a green blur. I try to stay on the grey one. - Joey Dunlop

  14. #14
    Join Date
    13th May 2003 - 12:00
    Bike
    Thinking
    Location
    Around
    Posts
    7,383
    Quote Originally Posted by hedgier1 View Post
    How do you get rid of the cracking leathers?
    I use mothers and have had no probs. Mind you I armour all my seat.
    Sport bike fun

    Contact babyb from KB, she is the last hope for this, after that get new ones.....good luck
    Ive run out of fucks to give

  15. #15
    Join Date
    3rd July 2003 - 12:00
    Bike
    Scorpio, XL1200N
    Location
    forests of azure
    Posts
    9,398
    Quote Originally Posted by Trudes View Post
    I had the same problem with my new squidsuit, kept sliding about all over the show...
    My old leather pants are good in that respect; they've been down the road and track and the arse is nicely roughed up so it grabs the seat.

    I'll take a sander to the backside of my new one-piece if I have to, but it'd be nice to solve the problem in a less destructive way.

    Quasi, any thoughts?
    kiwibiker is full of love, an disrespect.
    - mikey

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •